3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC38HC42YM
Microchip Tech · AC-DC Controllers & Regulators · SOIC-8
MIC38HC42YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | passive | Compensation: connect external compensation network to modify the error amplifier output. |
| 2 | FB | input | Feedback (Input): error amplifier input; feedback is 2.5V at the desired output voltage. |
| 3 | ISNS | input | Current Sense (Input): current sense comparator input; connect to a current sensing resistor or current transformer. |
| 4 | RT/CT | passive | Timing Resistor/Timing Capacitor: connect external RC network to select switching frequency. |
| 5 | GND | power_in | Ground: combined analog and power ground. |
| 6 | OUT | output | Power Output: totem-pole output. |
| 7 | VDD | power_in | Analog Supply (Input): controller circuitry supply input, return to analog ground (AGND); on the 8-pin version this pin is also the output-stage supply with 20V maximum input. |
| 8 | VREF | power_out | 5V Reference (Output): connect external RC network. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | 4.9 | 5 | 5.1 | V | TA = 25°C, IO = 1mA | 4 | |
| Total Output Variation | 4.82 | 5.18 | V | Line, Load, Temp., Note 1 | 4 | ||
| Line Regulation | 2 | 20 | mV | 12V ≤ VDD ≤ 18V, IO = 5µA, Note 6 | 4 | ||
| Load Regulation | 1 | 25 | mV | 1 ≤ IO ≤ 20mA | 4 | ||
| Long Term Stability | 5 | 25 | mV | TA = 125°C, 1000 hrs., Note 1 | 4 | ||
| Output Short Circuit | -30 | -80 | -180 | mA | 4 | ||
| Initial Accuracy | 49 | 52 | 55 | kHz | TA = 25°C, Note 5 | 4 | |
| Voltage Stability | 0.2 | 1 | % | 12 ≤ VDD ≤ 18V, Note 6 | 4 | ||
| Clock Ramp | 7.7 | 8.4 | 9 | mA | TA = 25°C, VRT/CT = 2V | 4 | |
| Reset Current | 7.2 | 8.4 | 9.5 | mA | TA = TMIN to TMAX | 4 | |
| Error Amp Input Voltage | 2.42 | 2.5 | 2.58 | V | VCOMP = 2.5V | 4 | |
| Error Amp Input Bias Current | -0.1 | -2 | µA | VFB = 5.0V | 4 | ||
| Error Amp AVOL | 65 | 90 | dB | 2 ≤ VO ≤ 4V | 4 | ||
| Error Amp Unity Gain Bandwidth | 0.7 | 1 | MHz | Note 1 | 4 | ||
| Error Amp PSRR | 60 | dB | 12 ≤ VDD ≤ 18V | 4 | |||
| Error Amp Output Sink Current | 2 | 14 | mA | VFB = 2.7V, VCOMP = 1.1V | 4 | ||
| Error Amp Output Source Current | -0.5 | -1 | mA | VFB = 2.3V, VCOMP = 5V | 4 | ||
| Error Amp VOUT High | VOUT | 5 | 6.8 | V | VFB = 2.3V, RL = 15k to ground | 4 | |
| Error Amp VOUT Low | VOUT | 0.1 | 1.1 | V | VFB = 2.7V, RL = 15k to VREF | 4 | |
| Current Sense Gain | 2.85 | 3 | 3.15 | V/V | Notes 2, 3 | 5 | |
| Current Sense Maximum Threshold | 0.9 | 1 | 1.1 | V | VCOMP = 5V, Note 2 | 5 | |
| Current Sense Input Bias Current | -0.1 | -2 | µA | 5 | |||
| Delay to Output | 120 | 250 | ns | 5 | |||
| Rise Time | 20 | 50 | ns | TA = 25°C, CL = 1nF | 5 | ||
| Fall Time | 15 | 40 | ns | TA = 25°C, CL = 1nF | 5 | ||
| UVLO Start Threshold (MIC38HC42/4 variant) | 13.5 | 14.5 | 15.5 | V | MIC38HC42/4 variant | 5 | |
| UVLO Minimum Operating Voltage (MIC38HC42/4 variant) | 8 | 9 | 10 | V | MIC38HC42/4 variant | 5 | |
| Maximum Duty Cycle (MIC38HC42/3 variant) | 94 | 96 | % | MIC38HC42/3 variant | 5 | ||
| Start-Up Current | 50 | 200 | µA | VDD = 13V, 38HC42/44 | 5 | ||
| Operating Supply Current | 4 | 6 | mA | VFB = VISNS = 0V | 5 | ||
| Zener Voltage (VDD) | 30 | 37 | V | IDD = 25mA, Note 6 | 5 | ||
| Zener Current (VDD) | 30 | mA | 4 | ||||
| Supply Voltage (VDD) | 20 | V | Note 6 (8-pin version: 20V max on pin 7) | 4 | |||
| Switch Supply Voltage (VD) | 20 | V | 4 | ||||
| Current Sense Voltage (VISNS) | -0.3 | 5.5 | V | 4 | |||
| Feedback Voltage (VFB) | -0.3 | 5.5 | V | 4 | |||
| Output Current (IOUT) | IOUT | 1 | A | 38HC42/3/4/5 | 4 | ||
| Operating Junction Temperature (TJ) | TJ | 150 | °C | 4 | |||
| Storage Temperature (TA) | TA | -65 | 150 | °C | 4 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | Ordering information temperature range | 2 | |
| Current Sense PSRR | 70 | dB | 12 ≤ VDD ≤ 18V, Note 2 | 5 | |||
| RDS(ON) HC High | RDS(ON) | 10 | Ω | ISOURCE = 200mA | 5 | ||
| RDS(ON) HC Low | RDS(ON) | 5.5 | Ω | ISINK = 200mA | 5 | ||
| Oscillator Temp. Stability | 0.04 | %/°C | TMIN ≤ TA ≤ TMAX, Note 1 | 4 | |||
| Oscillator Amplitude (VRT/CT peak to peak) | 1.9 | Vp-p | VRT/CT peak to peak | 4 | |||
| Reference Temp. Stability | 0.2 | mV/°C | Note 1 | 4 | |||
| Reference Output Noise Voltage | 50 | µV | 10Hz ≤ f ≤ 10kHz, TA = 25°C, Note 1 | 4 |
CAD (KiCad official)
- Symbol:
MIC38HC42YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic38hc42ym-etched.step/mic38hc42ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic38hc42ym.step/mic38hc42ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
15a5a95872b8dd74, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).