main
History Download
Ray Publish 0.1.0 12aec71

MIC3775YMM-TR

Microchip Tech · Linear Voltage Regulators (LDO) · MSOP-8

MIC3775YMM-TR from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input is CMOS-compatible: logic high enables the regulator, logic low or open shuts it down, and the pin must not be left floating.
2 IN power_in Supply input; the operating ratings specify a supply voltage of +2.25V to +6V.
3 ADJ input Adjustment feedback input that connects to a resistive voltage-divider network to set the output voltage from 1.24V up to the 6V family maximum.
4 OUT power_out Regulator output, which supplies up to 750 mA minimum and requires a ceramic output capacitor of at least 4.7 µF (10 µF or greater recommended).
5 GND power_in Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance.
6 GND power_in Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance.
7 GND power_in Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance.
8 GND power_in Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT -1 1 % 10 mA 3
Output Voltage VOUT -2 2 % 10 mA ≤ IOUT ≤ 750 mA, VOUT + 1V ≤ VIN ≤ 6V 3
Line Regulation ΔVOUT/VOUT 0.06 0.5 % IOUT = 10 mA, VOUT + 1V ≤ VIN ≤ 6V 3
Load Regulation ΔVOUT/VOUT 0.2 1 % VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 750 mA 3
Dropout Voltage VDO 125 200 mV IOUT = 100 mA 3
Dropout Voltage (bold, -40°C ≤ TJ ≤ +125°C) VDO 250 mV IOUT = 100 mA, bold values indicate -40°C ≤ TJ ≤ +125°C 3
Dropout Voltage VDO 280 500 mV IOUT = 750 mA 3
Ground Current IGND 7.5 15 mA IOUT = 750 mA, VIN = VOUT + 1V 4
Current Limit IOUT(LIM) 1.6 2.5 A VOUT = 0V, VIN = VOUT + 1V 4
Enable Input Voltage (logic low, off) VEN 0.8 V Logic low (off) 4
Enable Input Voltage (logic high, on) VEN 2.25 V Logic high (on) 4
Enable Input Current IEN 1 10 30 µA VEN = 2.25V 4
Enable Input Current (bold, -40°C ≤ TJ ≤ +125°C) IEN 2 µA VEN = 2.25V, bold values indicate -40°C ≤ TJ ≤ +125°C 4
Enable Input Current (bold, -40°C ≤ TJ ≤ +125°C) IEN 4 µA VEN = 0.8V, bold values indicate -40°C ≤ TJ ≤ +125°C 4
Output Leakage Current IFLG(LEAK) 0.01 1 µA VOH = 6V 4
Output Leakage Current (bold, -40°C ≤ TJ ≤ +125°C) IFLG(LEAK) 2 µA VOH = 6V, bold values indicate -40°C ≤ TJ ≤ +125°C 4
Output Low Voltage VFLG(DO) 250 500 mV VIN = 2.250V, IOL = 250 µA 4
Low Threshold VFLG 93 % % of VOUT 4
High Threshold VFLG 99.2 % % of VOUT 4
Reference Voltage (adjustable only) VREF 1.227 1.24 1.252 V 4
Reference Voltage (adjustable only, bold, -40°C ≤ TJ ≤ +125°C) VREF 1.215 1.265 V bold values indicate -40°C ≤ TJ ≤ +125°C 4
Adjust Pin Bias Current (adjustable only) 40 80 nA 4
Adjust Pin Bias Current (adjustable only, bold, -40°C ≤ TJ ≤ +125°C) 120 nA bold values indicate -40°C ≤ TJ ≤ +125°C 4
Supply Voltage (VIN) VIN 6.5 V 3
Enable Voltage (VEN) VEN 6.5 V 3
Lead Temperature 260 °C Soldering, 5 sec. 3
Storage Temperature TS -65 150 °C 3
Supply Voltage (VIN) operating VIN 2.25 6 V 3
Enable Voltage (VEN) operating VEN 0 6 V 3
Junction Temperature Range TJ -40 125 °C 3
Thermal Resistance, MSOP 8-Ld θJA 80 °C/W 5

CAD (KiCad official)

  • Symbol: MIC3775YMM-TR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic3775ymm-tr-etched.step / mic3775ymm-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic3775ymm-tr.step / mic3775ymm-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 9c378ab5b5d63e4b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF