Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC37101-1.8YM

Microchip Tech · Linear Voltage Regulators (LDO) · SOIC-8

MIC37101-1.8YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input is CMOS compatible; logic high enables the regulator, and logic low or open puts it in shutdown.
2 IN power_in Supply input for the regulator.
3 OUT power_out Regulator output.
4 FLG output Open collector error flag output that goes active low when the output voltage is under voltage.
5 GND power_in Ground.
6 GND power_in Ground.
7 GND power_in Ground.
8 GND power_in Ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT -1 1 % 10 mA 4
Output Voltage VOUT -2 2 % 10 mA ≤ IOUT ≤ 1A, VOUT + 1V ≤ VIN ≤ 6V 4
Line Regulation 0.06 0.5 % IOUT = 10 mA, VOUT + 1V ≤ VIN ≤ 6V 4
Load Regulation 0.2 1 % VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 1A 4
Output Voltage Temperature Coefficient ΔVOUT/ΔT 40 pm/°C Note 1 4
Dropout Voltage VDO 125 200 mV IOUT = 100 mA, ΔVOUT = -2% 4
Dropout Voltage VDO 210 350 mV IOUT = 500 mA, ΔVOUT = -2% 4
Dropout Voltage VDO 250 400 mV IOUT = 750 mA, ΔVOUT = -2% 4
Dropout Voltage VDO 280 500 mV IOUT = 1A, ΔVOUT = -1% 4
Ground Current (quiescent) IGND 11 25 mA IOUT = 1A, VIN = VOUT + 1V 4
Current Limit IOUT(lim) 1.6 2.5 A VOUT = 0V, VIN = VOUT + 1V 4
Enable Input Voltage (logic low, OFF) VEN 0.8 V Logic low (OFF) 5
Enable Input Voltage (logic high, ON) VEN 2.25 V Logic high (ON) 5
Enable Input Current IEN 1 10 30 µA VEN = 2.25V 5
Enable Input Current IEN 2 µA VEN = 0.8V 5
Enable Input Current IEN 4 µA 5
Flag Output Leakage Current IFLG(leak) 0.01 1 µA VOH = 6V 5
Flag Output Leakage Current IFLG(leak) 2 µA 5
Flag Output Low Voltage VFLG(do) 210 500 mV VIN = 2.25V, IOL = 250 µA 5
Flag Low Threshold VFLG 93 % % of VOUT 5
Flag High Threshold VFLG 99.2 % % of VOUT 5
Flag Hysteresis 1 % 5
Ground Current (quiescent) IGND 650 µA IOUT = 100 mA, VIN = VOUT + 1V 4
Ground Current (quiescent) IGND 3.5 mA IOUT = 500 mA, VIN = VOUT + 1V 4
Ground Current (quiescent) IGND 6.7 mA IOUT = 750 mA, VIN = VOUT + 1V 4
Lead Temperature (soldering) 260 °C soldering, 5 sec. 6
Junction Operating Temperature Range TJ -40 125 °C 6
Storage Temperature Range TS -65 150 °C 6
Thermal Resistance SOIC-8 junction-to-case θJC 20 °C/W SOIC-8 6
Thermal Resistance junction-to-ambient (ideal) θJA 63 °C/W ideal; varies with ground-plane copper area 16
Supply Voltage (absolute maximum) VIN 0 6.5 V 4
Enable Voltage (absolute maximum) VEN 6.5 V 4
Supply Voltage (operating) VIN 2.25 6 V 4
Enable Voltage (operating) VEN 0 6 V 4

CAD (KiCad official)

  • Symbol: MIC37101-1.8YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic37101-1-8ym-etched.step / mic37101-1-8ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic37101-1-8ym.step / mic37101-1-8ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet, copy hosted by LCSC (28 pp, sha256 5c22fec3b23b649c, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF