main
History Download
Ray Publish 0.1.0 0c021b9

MIC29372WU

Microchip Tech · Power Management Specialized - PMIC · TO-263-5

MIC29372WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Adjust input Feedback input to the internal 1.235V reference, with output set by VOUT = VREF x (1 + R1/R2) and an Adjust terminal rating of -1.5V to +26V.
2 Shutdown input Logic-controlled shutdown input in which low (ON, 0.7V max) enables the output and high (OFF, 2.0V min) disables it, with an absolute maximum of -0.3V to +30V.
3 GND power_in Ground pin, which is also the tab ground on the TO-263 package.
4 Input power_in Unregulated supply input with a 2V to 26V operating range, a -20V reverse-battery rating and a 60V positive transient rating (limited to under 100ms and 1% duty cycle).
5 Output power_out Regulated 750mA output that requires at least a 10µF output capacitor (ESR about 5Ω or less) to prevent oscillation.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VO -1 1 % 3
Output Voltage Accuracy VO -2 2 % 3
Output Voltage Accuracy VO -2.5 2.5 % 5mA ≤ IL ≤ 500mA 3
Output Voltage Accuracy VO -3 3 % 3
Output Voltage Accuracy VO -4 4 % 5mA ≤ IL ≤ 500mA 3
Output Voltage Temperature Coefficient ΔVO/ΔT 20 100 ppm/°C Note 2 3
Line Regulation ΔVO 0.03 0.1 % VIN = VOUT + 1V to 26V 3
Line Regulation ΔVO 0.4 % 3
Load Regulation ΔVO 0.04 0.16 % IL = 5 to 500mA 3
Load Regulation ΔVO 0.3 % Note 3 3
Dropout Voltage VIN, VO 80 150 mV IL = 5mA 3
Dropout Voltage VIN, VO 180 mV Note 4 3
Dropout Voltage VIN, VO 370 600 mV IL = 750mA 3
Dropout Voltage VIN, VO 750 mV 3
Ground Pin Current IGND 160 250 µA IL = 5mA 3
Ground Pin Current IGND 300 µA Note 5 3
Ground Pin Current IGND 1 2.5 mA IL = 100mA 3
Ground Pin Current IGND 3 mA 3
Ground Pin Current IGND 8 13 mA IL = 500mA 3
Ground Pin Current IGND 16 mA 3
Ground Pin Current IGND 15 25 mA IL = 750mA 3
Ground Pin Current at Dropout IGNDDO 200 500 µA VIN = 0.5V less than designed VOUT; VOUT ≥ 3.3V; IO = 5mA; Note 5 3
Current Limit ILIMIT 1.1 1.5 A VOUT = 0V 3
Current Limit ILIMIT 2 A Note 6 3
Thermal Regulation ΔVO/ΔPD 0.05 0.2 %/W Note 7 3
Reference Voltage VREF 1.223 1.235 1.247 V 4
Reference Voltage VREF 1.21 1.26 V 4
Reference Voltage VREF 1.204 1.266 V Note 8: VREF ≤ VOUT ≤ (VIN, 1V), 4.3V ≤ VIN ≤ 26V, 5mA < IL ≤ 750mA, TJ ≤ TJ MAX 4
Adjust Pin Bias Current IFB 20 40 nA 4
Adjust Pin Bias Current IFB 60 nA 4
Input Logic Voltage Low (ON) VSHUTDOWN 0.7 V 4
Input Logic Voltage Low (ON) VSHUTDOWN 1.3 V 4
Input Logic Voltage High (OFF) VSHUTDOWN 2 V 4
Shutdown Pin Input Current ISHUTDOWN 30 50 µA VSHUTDOWN = 2.4V 4
Shutdown Pin Input Current ISHUTDOWN 100 µA 4
Shutdown Pin Input Current ISHUTDOWN 450 600 µA VSHUTDOWN = 26V 4
Shutdown Pin Input Current ISHUTDOWN 750 µA 4
Regulator Output Current in Shutdown IOUT(SHDN) 3 10 µA Note 10 4
Regulator Output Current in Shutdown IOUT(SHDN) 20 µA 4
Operating Junction Temperature Range TJ -40 125 °C 3
Storage Temperature Range TSTG -65 150 °C 3
Lead Temperature (Soldering) TLEAD 260 °C 5 seconds soldering 3
Input Supply Voltage VIN -20 60 V 3
Operating Input Supply Voltage VIN 2 26 V † Across full operating temperature, 4.3V minimum for full output current; 2V at 25°C for lower output voltage and low current 3
Adjust Input Voltage VADJ -1.5 26 V Notes 9 and 10 3
Shutdown Input Voltage VSHUTDOWN -0.3 30 V 3
Thermal Resistance Junction-to-Case (TO-263) θJC 2.5 °C/W TO-263 package 3

CAD (KiCad official)

  • Symbol: MIC29372WU
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: mic29372wu-etched.step / mic29372wu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic29372wu.step / mic29372wu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 edc002f9ab43c37b, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF