component
MIC29302WU-TR
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC29302WU-TR
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-5
MIC29302WU-TR from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | CMOS compatible control input; logic-high enables the regulator and logic-low shuts it down. |
| 2 | IN | power_in | Supplies the current to the output power device; the overvoltage sensor disables the regulator when the input exceeds approximately 32V. |
| 3 | GND | power_in | Ground pin; the TAB is also connected internally to the IC ground. |
| 4 | OUT | power_out | The regulator output voltage. |
| 5 | ADJ | input | Adjustable regulator feedback input that connects to the resistor divider from OUTPUT to GND to set the output voltage. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | -1 | 1 | % | IOUT = 10 mA | 5 | |
| Output Voltage | VOUT | -2 | 2 | % | 10 mA ≤ IOUT ≤ IFL, (VOUT + 1V) ≤ VIN ≤26V (Note 3) | 5 | |
| Line Regulation | 0.06 | 0.5 | % | IOUT = 10 mA, (VOUT + 1V) ≤ VIN ≤ 26V | 5 | ||
| Load Regulation | 0.2 | 1 | % | VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 1.5A (Note 3, Note 4) | 5 | ||
| Output Voltage Temperature Coefficient | ∆VO/∆T | 20 | 100 | ppm/°C | Output Voltage (Note 4) | 5 | |
| Dropout Voltage (MIC2930x) | 80 | 175 | mV | MIC2930x IOUT = 100 mA | 5 | ||
| Dropout Voltage (MIC2930x) | 370 | 600 | mV | MIC2930x IOUT = 3A | 5 | ||
| Ground Current (MIC2930x) | IGND | 10 | 35 | mA | MIC2930x IOUT = 1.5A, VIN = VOUT + 1V | 5 | |
| Current Limit (MIC2930x) | ILIM | 4.5 | 5 | A | MIC2930x, VOUT = 0V, (Note 7) | 5 | |
| Reference Voltage | VREF | 1.228 | 1.24 | 1.252 | V | 6 | |
| Reference Voltage (over temperature) | VREF | 1.215 | 1.265 | V | 6 | ||
| Reference Voltage | VREF | 1.203 | 1.277 | V | Note 8: VREF ≤ VOUT ≤ (VIN – 1V), 2.3V ≤ VIN ≤ 26V, 10 mA < IL ≤ IFL, TJ ≤ TJMAX | 6 | |
| Adjust Pin Bias Current | 40 | 80 | nA | 6 | |||
| Adjust Pin Bias Current | 120 | nA | 6 | ||||
| Input Logic Voltage Low (OFF) | 0.8 | V | 7 | ||||
| Input Logic Voltage High (ON) | 2.4 | V | 7 | ||||
| Enable Pin Input Current | 100 | 600 | µA | VEN = 26V | 7 | ||
| Enable Pin Input Current (over temperature) | 750 | µA | VEN = 26V | 7 | |||
| Enable Pin Input Current | 0.7 | 2 | µA | VEN = 0.8V | 7 | ||
| Enable Pin Input Current (over temperature) | 4 | µA | VEN = 0.8V | 7 | |||
| Regulator Output Current in Shutdown | 10 | 500 | µA | VEN ≤ 0.8V and VIN ≤ 26V, VOUT = 0. | 7 | ||
| Input Supply Voltage | VIN | -20 | 60 | V | Note 1: limited duration (<100 ms) and duty cycle (≤1%) | 4 | |
| Enable Input Voltage | VEN | -0.3 | V | Upper limit printed as VIN | 4 | ||
| Maximum Operating Input Voltage | 26 | V | 4 | ||||
| Adjustable Output Voltage Range | VOUT | 1.25 | 25 | V | Adjustable versions (MIC29xx2/MIC29xx3) | 25 | |
| Operating Junction Temperature | TJ | -40 | 125 | °C | 8 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 8 | ||
| Lead Temperature | 260 | °C | Soldering, 5 sec. | 8 | |||
| Thermal Resistance TO-263 (junction to case) | θJC | 2 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
MIC29302WU-TR - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic29302wu-tr-etched.step/mic29302wu-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic29302wu-tr.step/mic29302wu-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (40 pp, sha256
f95273dcb3aeb1e7, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).