component
MIC29302S
Public Made by Adomby adom
HGSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC29302S
HGSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-5
MIC29302S from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input: active-high CMOS-compatible control input that must not float; when unused it can be tied to IN for continuous operation. |
| 2 | IN | power_in | Unregulated input, +2.8V to +16V maximum (operating input voltage range is 3V to 16V). |
| 3 | GND | power_in | Ground; the TAB is also connected internally to the IC's ground on both packages. |
| 4 | OUT | power_out | Regulator output voltage (3A full-load output current capability). |
| 5 | ADJ | input | Feedback voltage input: 1.24V feedback from an external resistor divider sets the output voltage, VOUT = 1.242 × (R1/R2 + 1). |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage (VIN) | VIN | -20 | 20 | V | 4 | ||
| Enable Input Voltage (VEN) | VEN | -0.3 | V | 4 | |||
| Lead Temperature (soldering 10 sec), TO-263/TO-220 | 245 | °C | 10 sec soldering | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Operating Input Voltage | VIN | 3 | 16 | V | 4 | ||
| Output Voltage Accuracy | -2 | 2 | % | 100mA ≤ IOUT ≤ 3A, (VOUT + 1V) ≤ VIN ≤ 16V | 4 | ||
| Line Regulation | 0.1 | 0.5 | % | IOUT = 100mA, (VOUT + 1V) ≤ VIN ≤ 16V | 4 | ||
| Load Regulation | 0.2 | 1 | % | VIN = VOUT + 1V, 100mA ≤ IOUT ≤ 3A | 4 | ||
| Dropout Voltage | 80 | 200 | mV | ΔVOUT = -1%; IOUT = 100mA | 4 | ||
| Dropout Voltage | 450 | 800 | mV | ΔVOUT = -1%; IOUT = 3A | 4 | ||
| Ground Current | 5 | 20 | mA | IOUT = 750mA, VIN = VOUT + 1V | 4 | ||
| Ground Current | 60 | 150 | mA | IOUT = 3A | 4 | ||
| Current Limit | 3 | 4 | A | VOUT = 0V (pulse tested) | 4 | ||
| Reference Voltage | 1.215 | 1.267 | V | Note 8: VREF ≤ VOUT ≤ VIN -1, 3V≤VOUT≤16V, 10mA ≤ IL ≤ IFL, TJ ≤ TJmax | 5 | ||
| Input Logic Voltage Low (OFF) | 0.8 | V | 5 | ||||
| Input Logic Voltage High (ON) | 2.4 | V | 5 | ||||
| Enable Pin Input Current | 15 | 30 | µA | VEN = 8V | 5 | ||
| Enable Pin Input Current (second value, bold over-temperature) | 75 | µA | VEN = 8V | 5 | |||
| Adjust Pin Bias Current | 40 | 120 | nA | 5 | |||
| Enable Pin Input Current | 2 | 4 | µA | VEN = 0.8V | 5 | ||
| Regulator Output Current in Shutdown | 10 | 20 | µA | Note 10: VEN ≤ 0.8V, VIN ≤ 16V and VOUT = 0V | 5 | ||
| Dropout Voltage | 220 | mV | ΔVOUT = -1%; IOUT = 750mA | 4 | |||
| Dropout Voltage | 275 | mV | ΔVOUT = -1%; IOUT = 1.5A | 4 | |||
| Ground Current | 15 | mA | IOUT = 1.5A | 4 | |||
| Ground Pin Current @ Dropout | IGRNDDO | 2 | mA | VIN = 0.5V less than specified VOUT; IOUT = 10mA | 4 | ||
| Ground Pin Current in Shutdown | 32 | µA | VIN = 16V | 4 | |||
| Output Noise Voltage (en) | en | 400 | µV (rms) | 10Hz to 100kHz; CL = 10µF | 4 | ||
| Output Noise Voltage (en) | en | 260 | µV (rms) | 10Hz to 100kHz; IL = 100mA, CL = 33µF | 4 | ||
| Thermal Resistance Junction-to-Case, TO-263 (θJC) | θJC | 3 | °C/W | 4 | |||
| Thermal Resistance Junction-to-Ambient, TO-263 (θJA) | θJA | 28 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
MIC29302S - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic29302s-etched.step/mic29302s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic29302s.step/mic29302s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (18 pp, sha256
1ab3ed8806be19ba, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).