main
History Download
Ray Publish 0.1.0 cfdef6c

MIC29302AWU

Microchip Tech · Linear Voltage Regulators (LDO) · TO-263-5

MIC29302AWU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input is an active-high TTL/CMOS-compatible control input and must not float.
2 IN power_in Unregulated input with a maximum of +3V to +16V.
3 GND power_in Ground pin; the TAB is also connected internally to the IC's ground on both packages.
4 OUT power_out Regulator output voltage.
5 ADJ input Feedback voltage pin with a 1.24V feedback from an external resistor divider.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy ∆VOUT -2 2 % 100 mA ≤ IOUT ≤ 3A, (VOUT + 1V) ≤ VIN ≤ 16V 3
Line Regulation ∆VOUT/∆VIN 0.1 0.5 % IOUT = 100 mA, (VOUT + 1V) ≤ VIN ≤ 16V 3
Load Regulation ∆VOUT/∆IOUT 0.2 1 % VIN = VOUT + 1V, 100 mA ≤ IOUT ≤ 3A 3
Dropout Voltage VDO 100 200 mV IOUT = 100 mA, VIN ≥ 3.184V 3
Dropout Voltage VDO 560 800 mV IOUT = 3A, VIN ≥ 3.4V 3
Ground Current IGND 5 20 mA IOUT = 750 mA, VIN = VOUT + 1V 3
Ground Current IGND 60 150 mA IOUT = 3A 3
Current Limit ILIMIT 3 4 A VOUT = 0V, Note 3 3
Reference Voltage VREF 1.215 1.267 V Note 4 3
Adjust Pin Bias Current IADJ 40 120 nA 3
Enable Input Logic Voltage, Low (OFF) VENABLE 0.8 V Low (OFF) 4
Enable Input Logic Voltage, High (ON) VENABLE 2.4 V High (ON) 4
Enable Pin Input Current IENABLE 15 30 µA VEN = 4.2V 4
Enable Pin Input Current IENABLE 75 µA VEN = 4.2V 4
Enable Pin Input Current IENABLE 2 µA VEN = 0.8V 4
Enable Pin Input Current IENABLE 4 µA VEN = 0.8V 4
Regulator Output Current in Shutdown IOUT-SHDN 20 µA Note 5 4
Input Supply Voltage VIN -20 20 V 3
Enable Input Voltage VEN -0.3 V Maximum is VIN 3
Operating Input Voltage 3 16 V 3
Junction Operating Temperature Range TJ -40 125 °C 5
Storage Temperature Range TS -65 150 °C 5
Thermal Resistance TO-263 junction-to-case θJC 3 °C/W 5
Thermal Resistance TO-263 junction-to-air θJA 28 °C/W 5

CAD (KiCad official)

  • Symbol: MIC29302AWU
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: mic29302awu-etched.step / mic29302awu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic29302awu.step / mic29302awu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 7ab2675814b16914, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF