component
MIC29302AWD-TR
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MIC29302AWD-TR
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5
MIC29302AWD-TR from Microchip Tech, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high TTL/CMOS-compatible enable control input that must not be left floating; connecting it to IN keeps the regulator permanently on. |
| 2 | IN | power_in | Unregulated input supply, specified from +3V to +16V maximum. |
| 3 | GND | power_in | Ground pin; the TAB is also connected internally to the IC ground on this package. |
| 4 | OUT | power_out | Regulator output voltage, adjustable from 1.24V to 15V using two external resistors. |
| 5 | ADJ | input | Feedback input receiving the 1.24V reference from the external resistor divider that sets the output voltage. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-252-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | 100 mA ≤ IOUT ≤ 3A, (VOUT + 1V) ≤ VIN ≤ 16V | 3 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.1 | 0.5 | % | IOUT = 100 mA, (VOUT + 1V) ≤ VIN ≤ 16V | 3 | |
| Load Regulation | ΔVOUT/ΔIOUT | 0.2 | 1 | % | VIN = VOUT + 1V, 100 mA ≤ IOUT ≤ 3A | 3 | |
| Dropout Voltage | VDO | 100 | 200 | mV | IOUT = 100 mA, VIN ≥ 3.184V | 3 | |
| Dropout Voltage | VDO | 560 | 800 | mV | IOUT = 3A, VIN ≥ 3.4V | 3 | |
| Ground Current | IGND | 5 | 20 | mA | IOUT = 750 mA, VIN = VOUT + 1V | 3 | |
| Ground Current | IGND | 60 | 150 | mA | IOUT = 3A | 3 | |
| Current Limit | ILIMIT | 3 | 4 | A | VOUT = 0V, Note 3 | 3 | |
| Reference Voltage | VREF | 1.215 | 1.267 | V | Note 4 | 3 | |
| Adjust Pin Bias Current | IADJ | 40 | 120 | nA | 3 | ||
| Enable Input Logic Voltage Low (OFF) | VENABLE | 0.8 | V | Low (OFF) | 4 | ||
| Enable Input Logic Voltage High (ON) | VENABLE | 2.4 | V | High (ON) | 4 | ||
| Enable Pin Input Current | IENABLE | 15 | 30 | µA | VEN = 4.2V | 4 | |
| Enable Pin Input Current | IENABLE | 75 | µA | VEN = 4.2V, bold values -40°C ≤ TJ ≤ +125°C | 4 | ||
| Enable Pin Input Current | IENABLE | 2 | µA | VEN = 0.8V | 4 | ||
| Enable Pin Input Current | IENABLE | 4 | µA | VEN = 0.8V, bold values -40°C ≤ TJ ≤ +125°C | 4 | ||
| Regulator Output Current in Shutdown | IOUT-SHDN | 10 | 20 | µA | Note 5 | 4 | |
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Input Supply Voltage | VIN | -20 | 20 | V | 3 | ||
| Enable Input Voltage | VEN | -0.3 | V | Maximum printed as VIN (not a numeric limit) | 3 | ||
| Operating Input Voltage | VIN | 3 | 16 | V | 3 | ||
| Dropout Voltage | VDO | 300 | mV | IOUT = 1.5A, VIN ≥ 3.184V | 3 | ||
| Dropout Voltage | VDO | 500 | mV | IOUT = 2.75A, VIN ≥ 3.184V | 3 | ||
| Ground Current | IGND | 15 | mA | IOUT = 1.5A | 3 | ||
| Ground Pin Current at Dropout | IGNDDO | 2 | mA | VIN = 0.5V less than specified VOUT; IOUT = 10 mA | 3 | ||
| Output Noise Voltage (10 Hz to 100 kHz) | eN | 400 | µVRMS | CL = 10 µF | 3 | ||
| Output Noise Voltage (10 Hz to 100 kHz) | eN | 260 | µVRMS | CL = 33 µF | 3 | ||
| Ground Pin Current in Shutdown | ISHDN | 32 | µA | Input Voltage VIN = 16V | 3 | ||
| Thermal Resistance TO-252 Junction-to-Case | θJC | 3 | °C/W | 5 | |||
| Thermal Resistance TO-252 Junction-to-Air | θJA | 35 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC29302AWD-TR - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
mic29302awd-tr-etched.step/mic29302awd-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic29302awd-tr.step/mic29302awd-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
906265a4b25efc8b, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC29302AWD-TR
**Microchip Tech** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5
MIC29302AWD-TR from Microchip Tech, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high TTL/CMOS-compatible enable control input that must not be left floating; connecting it to IN keeps the regulator permanently on. |
| 2 | IN | power_in | Unregulated input supply, specified from +3V to +16V maximum. |
| 3 | GND | power_in | Ground pin; the TAB is also connected internally to the IC ground on this package. |
| 4 | OUT | power_out | Regulator output voltage, adjustable from 1.24V to 15V using two external resistors. |
| 5 | ADJ | input | Feedback input receiving the 1.24V reference from the external resistor divider that sets the output voltage. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-252-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | | 2 | % | 100 mA ≤ IOUT ≤ 3A, (VOUT + 1V) ≤ VIN ≤ 16V | 3 |
| Line Regulation | ΔVOUT/ΔVIN | | 0.1 | 0.5 | % | IOUT = 100 mA, (VOUT + 1V) ≤ VIN ≤ 16V | 3 |
| Load Regulation | ΔVOUT/ΔIOUT | | 0.2 | 1 | % | VIN = VOUT + 1V, 100 mA ≤ IOUT ≤ 3A | 3 |
| Dropout Voltage | VDO | | 100 | 200 | mV | IOUT = 100 mA, VIN ≥ 3.184V | 3 |
| Dropout Voltage | VDO | | 560 | 800 | mV | IOUT = 3A, VIN ≥ 3.4V | 3 |
| Ground Current | IGND | | 5 | 20 | mA | IOUT = 750 mA, VIN = VOUT + 1V | 3 |
| Ground Current | IGND | | 60 | 150 | mA | IOUT = 3A | 3 |
| Current Limit | ILIMIT | 3 | 4 | | A | VOUT = 0V, Note 3 | 3 |
| Reference Voltage | VREF | 1.215 | | 1.267 | V | Note 4 | 3 |
| Adjust Pin Bias Current | IADJ | | 40 | 120 | nA | | 3 |
| Enable Input Logic Voltage Low (OFF) | VENABLE | | | 0.8 | V | Low (OFF) | 4 |
| Enable Input Logic Voltage High (ON) | VENABLE | 2.4 | | | V | High (ON) | 4 |
| Enable Pin Input Current | IENABLE | | 15 | 30 | µA | VEN = 4.2V | 4 |
| Enable Pin Input Current | IENABLE | | | 75 | µA | VEN = 4.2V, bold values -40°C ≤ TJ ≤ +125°C | 4 |
| Enable Pin Input Current | IENABLE | | | 2 | µA | VEN = 0.8V | 4 |
| Enable Pin Input Current | IENABLE | | | 4 | µA | VEN = 0.8V, bold values -40°C ≤ TJ ≤ +125°C | 4 |
| Regulator Output Current in Shutdown | IOUT-SHDN | | 10 | 20 | µA | Note 5 | 4 |
| Junction Operating Temperature Range | TJ | -40 | | 125 | °C | | 5 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 5 |
| Input Supply Voltage | VIN | -20 | | 20 | V | | 3 |
| Enable Input Voltage | VEN | -0.3 | | | V | Maximum printed as VIN (not a numeric limit) | 3 |
| Operating Input Voltage | VIN | 3 | | 16 | V | | 3 |
| Dropout Voltage | VDO | | 300 | | mV | IOUT = 1.5A, VIN ≥ 3.184V | 3 |
| Dropout Voltage | VDO | | 500 | | mV | IOUT = 2.75A, VIN ≥ 3.184V | 3 |
| Ground Current | IGND | | 15 | | mA | IOUT = 1.5A | 3 |
| Ground Pin Current at Dropout | IGNDDO | | 2 | | mA | VIN = 0.5V less than specified VOUT; IOUT = 10 mA | 3 |
| Output Noise Voltage (10 Hz to 100 kHz) | eN | | 400 | | µVRMS | CL = 10 µF | 3 |
| Output Noise Voltage (10 Hz to 100 kHz) | eN | | 260 | | µVRMS | CL = 33 µF | 3 |
| Ground Pin Current in Shutdown | ISHDN | | 32 | | µA | Input Voltage VIN = 16V | 3 |
| Thermal Resistance TO-252 Junction-to-Case | θJC | | 3 | | °C/W | | 5 |
| Thermal Resistance TO-252 Junction-to-Air | θJA | | 35 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `MIC29302AWD-TR`
- Footprint: `Package_TO_SOT_SMD:TO-252-5_TabPin6`
- 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files: `mic29302awd-tr-etched.step` / `mic29302awd-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic29302awd-tr.step` / `mic29302awd-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913977825247232) (24 pp, sha256 `906265a4b25efc8b`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic29302awd-tr-datasheet.pdf)