component
MIC29152S
Public Made by Adomby adom
HGSEMI Linear Voltage Regulators (LDO), TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC29152S
HGSEMI · Linear Voltage Regulators (LDO) · TO-263-5
MIC29152S from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | CMOS/TTL-compatible enable input where logic high (at least 2.4V) enables the regulator and logic low (at most 0.8V) shuts it down, with an absolute maximum of -0.3V to VIN. |
| 2 | IN | power_in | Supplies the current to the output power device, with a maximum operating input voltage of 26V. |
| 3 | GND | power_in | Ground pin, with the package tab also connected internally to the IC ground. |
| 4 | OUT | power_out | Regulator output voltage pin, delivering up to 1.5A for the MIC29152. |
| 5 | ADJ | input | Adjustable regulator feedback input that connects to a resistor divider from OUTPUT to GND to set the output voltage, programmable between 1.25V and 25V against a 1.240V typical reference. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-263-5 |
| Category | Power Management ICs |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
MIC29152S - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic29152s-etched.step/mic29152s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic29152s.step/mic29152s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (23 pp, sha256
8fe6696dd59bc595, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).