main
Ray Publish 0.1.0 74cee2b
{
  "slug": "mic2800-g1jjyml-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Power Management Specialized - PMIC, QFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "mic2800-g1jjyml-tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic2800-g1jjyml-tr.kicad_sym",
    "mic2800-g1jjyml-tr.kicad_mod",
    "mic2800-g1jjyml-tr.glb",
    "mic2800-g1jjyml-tr.step",
    "mic2800-g1jjyml-tr.lbr",
    "docs/hero.png",
    "docs/mic2800-g1jjyml-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic2800-g1jjyml-tr-hero.glb",
    "mic2800-g1jjyml-tr-hero.overlay.json",
    "mic2800-g1jjyml-tr-etched.glb"
  ],
  "component": {
    "mpn": "MIC2800-G1JJYML-TR",
    "manufacturer": "Microchip Tech",
    "package": "QFN-16(3x3)",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "Power Management Specialized - PMIC",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/7844c1603448e6cca5558f7207745040.pdf",
    "parts": {
      "symbol": "mic2800-g1jjyml-tr.kicad_sym",
      "footprint": "mic2800-g1jjyml-tr.kicad_mod",
      "model_3d": "mic2800-g1jjyml-tr-hero.glb",
      "model_3d_plain": "mic2800-g1jjyml-tr-etched.glb",
      "model_3d_step": "mic2800-g1jjyml-tr-etched.step",
      "model_3d_step_plain": "mic2800-g1jjyml-tr.step",
      "lbr": "mic2800-g1jjyml-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C621825",
      "digikey": "MIC2800-G1JJYML-TR-ND",
      "mouser": "579-MIC2800G1JJYMLTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:07:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MIC2800-G1JJYML-TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "579-MIC2800G1JJYMLTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LOWQ",
        "type": "input",
        "description": "LOWQ mode control: logic high (>1V) selects constant-frequency PWM mode, logic low (<0.2V) selects low-noise LOWQ linear mode, and it must not be left floating."
      },
      {
        "number": "2",
        "name": "BIAS",
        "type": "passive",
        "description": "Internal bias supply for control and reference circuitry, to be decoupled to signal ground with a 0.1 µF ceramic and not loaded."
      },
      {
        "number": "3",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal ground for the biasing and control circuitry; its current loop should be kept as small as possible."
      },
      {
        "number": "4",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground for the high-current PWM mode; its current loop should be kept as small as possible."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switch node connected to the inductor, driven by the internal power MOSFETs; route it away from sensitive nodes because of high-speed switching."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "DC/DC converter supply input that must be tied externally to pin 7."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "LDO2 supply input that must be tied externally to pin 6."
      },
      {
        "number": "8",
        "name": "LDO2",
        "type": "power_out",
        "description": "Output of LDO regulator 2, which is 300 mA capable; in LOWQ mode its output load is limited to 10 mA."
      },
      {
        "number": "9",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the DC/DC error amplifier; for fixed output voltages connect it directly to VOUT."
      },
      {
        "number": "10",
        "name": "LDO",
        "type": "power_out",
        "description": "Output of the LOWQ-mode linear regulator, connected to the DC/DC output; in LOWQ mode it can deliver 60 mA and limits LDO1 and LDO2 loads to 10 mA."
      },
      {
        "number": "11",
        "name": "LDO1",
        "type": "power_out",
        "description": "Output of LDO regulator 1, whose input power is provided by the DC/DC switching regulator."
      },
      {
        "number": "12",
        "name": "POR",
        "type": "output",
        "description": "Open-drain power-on reset output that goes active low on an output undervoltage condition on any of the three regulated outputs."
      },
      {
        "number": "13",
        "name": "CSET",
        "type": "passive",
        "description": "Delay set input where a capacitor to GND sets the POR rising delay; it cannot be grounded directly, and leaving it open gives the minimum delay."
      },
      {
        "number": "14",
        "name": "CBYP",
        "type": "passive",
        "description": "Reference bypass input where an external 0.1 µF to GND reduces output noise; it may be left open."
      },
      {
        "number": "15",
        "name": "EN1",
        "type": "input",
        "description": "Active-high enable for the DC/DC converter and LDO1; logic high turns them on, logic low turns them off, and it must not be left floating."
      },
      {
        "number": "16",
        "name": "EN2",
        "type": "input",
        "description": "Active-high enable for LDO2 only; logic high turns it on, logic low turns it off, and it must not be left floating."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is the single 16-pin 3x3 QFN table on page 17, which the datasheet applies to all MIC2800; Pages 2-15 are not in the excerpt, so the G1JJ output voltage and the Product Identification System ; The LOWQ pin is described as 'Active Low Input' but its logic levels are stated as Logic High = Full"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0157,
        "at": "2026-10-28T16:07:13"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/7844c1603448e6cca5558f7207745040.pdf",
        "pages": 30,
        "sha256": "59709361ca877f0a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic2800-g1jjyml-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic2800-g1jjyml-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b9fc4a468d006684456e865cc97d516fc04d7bf75b6b92eab14c10cee85f4bb7",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}