main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic280-0ym6-tr: viewers · Ray
mic280-0ym6-tr-etched.glb Publish 0.1.0 · Ray
mic280-0ym6-tr-etched.step mic280-0ym6-tr: factory component page (tier=mfr) · Ray
mic280-0ym6-tr-hero.glb mic280-0ym6-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
mic280-0ym6-tr-hero.overlay.json Publish 0.1.0 · Ray
mic280-0ym6-tr.glb Publish 0.1.0 · Ray
mic280-0ym6-tr.kicad_mod Publish 0.1.0 · Ray
mic280-0ym6-tr.kicad_sym Publish 0.1.0 · Ray
mic280-0ym6-tr.lbr Publish 0.1.0 · Ray
mic280-0ym6-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

MIC280-0YM6-TR

Microchip Tech · Monitors & Reset Circuits · SOT-23-6

MIC280-0YM6-TR from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input, 3.0V to 3.6V supply range.
2 GND power_in Ground.
3 T1 input Analog input connection to the remote diode junction; maximum recommended total capacitance from T1 to GND is 2200 pF.
4 CLK input Digital input for the serial bit clock, 5V-tolerant regardless of VDD.
5 DATA bidirectional Open-drain digital input/output for serial data, 5V-tolerant regardless of VDD.
6 /INT output Open-drain digital interrupt output that supports the SMBus Alert Response Address protocol, 5V-tolerant regardless of VDD.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current, normal mode IDD 0.23 0.4 mA /INT, T1 open; CLK = DATA = High; Normal mode 4
Power-On Reset Voltage VPOR 2.65 2.95 V All registers reset to default values; A/D conversions initiated 4
Remote Temp Accuracy 60-100C -1 0.25 1 °C 60°C ≤ TD ≤ 100°C, 3.15V < VDD < 3.45V, 25°C < TA < 85°C 4
Remote Temp Accuracy 0-100C -2 1 2 °C 0°C ≤ TD ≤ 100°C, 3.15V < VDD < 3.45V, 25°C < TA < 85°C 4
Remote Temp Accuracy -55 to 125C -4 2 4 °C -55°C ≤ TD ≤ 125°C, 3.15V < VDD < 3.45V, 25°C < TA < 85°C 4
Local Temp Accuracy 0-100C -2 1 2 °C 0°C ≤ TA ≤ 100°C, 3.15V < VDD < 3.45V 4
Local Temp Accuracy -55 to 125C -2.5 1.5 2.5 °C -55°C ≤ TA ≤ +125°C, 3.15V < VDD < 3.45V 4
Conversion Time 9 bits tCONV 200 240 ms RES[1:0]=00 (9 bits) 4
Conversion Time 10 bits tCONV 330 390 ms RES[1:0]=01 (10 bits) 4
Conversion Time 11 bits tCONV 570 670 ms RES[1:0]=10 (11 bits) 4
Conversion Time 12 bits tCONV 1000 1250 ms RES[1:0]=11 (12 bits) 4
Current into External Diode, high level IF 192 400 µA T1 forced to 1.0V, High level 5
Current into External Diode, low level IF 7 12 µA Low level 5
DATA Low Output Voltage VOL 0.3 V IOL = 3 mA 5
DATA Low Output Voltage VOL 0.5 V IOL = 6 mA 5
DATA Low Input Voltage VIL 0.8 V 3V ≤ VDD ≤ 3.6V 5
DATA High Input Voltage VIH 2.1 5.5 V 3V ≤ VDD ≤ 3.6V 5
DATA Input Current ILEAK -1 1 µA 5
CLK Low Input Voltage VIL 0.8 V 3V ≤ VDD ≤ 3.6V 5
CLK High Input Voltage VIH 2.1 5.5 V 3V ≤ VDD ≤ 3.6V 5
CLK Input Current ILEAK -1 1 µA 5
/INT Low Output Voltage VOL 0.3 V IOL = 3 mA 5
/INT Low Output Voltage VOL 0.5 V IOL = 6 mA 5
Interrupt Reset Propagation Delay tnINT 1 µs From read of STATUS or A.R.A. to /INT > VOH, RPULLUP = 10 kΩ 5
/INT Leakage Current ILEAK -1 1 µA 5
CLK Period t1 2.5 µs 6
Data In Setup Time to CLK High t2 100 ns 6
Data Out Stable after CLK Low t3 300 ns 6
Data Low Setup Time to CLK Low t4 100 ns Start Condition 6
Data High Hold Time after CLK High t5 100 ns Stop Condition 6
Bus Timeout tTO 25 30 35 ms 6
Power Supply Voltage (operating) VDD 3 3.6 V Operating Ratings 3
Ambient Temperature Range TA -55 125 °C 7
Power Supply Voltage VDD 3.8 V 3
Voltage on CLK, DATA, /INT -0.3 6 V 3
Current into any Pin -10 10 mA 3
ESD Rating, Human Body Model 1.5 kV Note 1 3
ESD Rating, Machine Model 200 V Note 1 3
Maximum Junction Temperature TJ 150 °C Note 1 7
Storage Temperature Range TS -65 150 °C 7
Supply Current, shutdown mode (CLK 100 kHz) IDD 9 µA Shutdown mode; /INT, T1 open; CLK = 100 kHz, DATA = High 4
Supply Current, shutdown mode IDD 6 µA Shutdown mode; /INT, T1 open; CLK = DATA = High 4
Power-On Reset Time tPOR 200 µs VDD > VPOR 4
Power-On Reset Hysteresis Voltage VHYST 300 mV 4
Input Capacitance (DATA) CIN 10 pF 5
Input Capacitance (CLK) CIN 10 pF 5
Thermal Resistance Junction to Air, SOT23-6 θJA 230 °C/W 7

CAD (KiCad official)

  • Symbol: MIC280-0YM6-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mic280-0ym6-tr-etched.step / mic280-0ym6-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic280-0ym6-tr.step / mic280-0ym6-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (34 pp, sha256 3f176c9d9c0f22c1, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF