Generated by kicad-footprint-generator · KiCad file format 20260206
MIC2774N-46YM5-TR
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
MIC2774N-46YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /RST | output | Open-drain active-low reset output (N version, requires external pull-up resistor) asserted low whenever VIN or VDD falls below threshold and held for no fewer than 140 ms after both return above the threshold limits. |
| 2 | GND | power_in | Ground. |
| 3 | /MR | input | Manual reset input; driving it low initiates immediate unconditional reset, with reset de-asserted no fewer than 140 ms after release, internal pull-up to VDD so it may be left open if unused. |
| 4 | IN | input | Analog undervoltage detector input compared to the internal 300 mV reference, where an undervoltage condition triggers a reset sequence. |
| 5 | VDD | power_in | Power supply input (1.5V to 5.5V operating) for internal circuitry and input to the fixed-threshold voltage monitor, where an undervoltage condition triggers a reset sequence. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Undervoltage Threshold on VDD (tolerance) | VUV_THR | -1.5 | 1.5 | % | VTH, 1.5% to VTH + 1.5%; See Table 5-1 (code 46, VTH nominal 4.68V) | 3 | |
| Nominal Threshold Voltage, code 46 | VTH | 4.68 | V | Table 5-1, code 46, Typical Application VDD 5.0V ±5% | 11 | ||
| IN Undervoltage Threshold | VREF | 295 | 300 | 305 | mV | Note 2 | 3 |
| IN Input Current (over temperature) | IIN | 10 | nA | TMIN ≤ TA ≤ TMAX | 3 | ||
| Reset Pulse Width | tRST | 140 | 280 | ms | TMIN ≤ TA ≤ TMAX | 3 | |
| RST or /RST Output Voltage Low | VOL | 0.3 | V | ISINK = 1.6 mA; VDD ≥ 1.6V | 3 | ||
| /MR Internal Pull-Up Current | IPU | 100 | 250 | nA | 4 | ||
| /MR Input Current | IIN | 100 | 250 | nA | V/MR < VIL | 4 | |
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | Note 1 | 4 | |
| Storage Temperature Range | TS | -65 | 150 | °C | 4 | ||
| Supply Voltage (absolute maximum) | VDD | -0.3 | 7 | V | 3 | ||
| Input Voltages (absolute maximum) | VIN, V/MR | -0.3 | 7 | V | 3 | ||
| Output Voltages (absolute maximum) | V/RST, VRST | -0.3 | 7 | V | 3 | ||
| RST, /RST Current (absolute maximum) | 20 | mA | 3 | ||||
| ESD Rating | 1.5 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Supply Voltage (operating) | VDD | 1.5 | 5.5 | V | Operating Ratings | 3 | |
| Input Voltages (operating) | VIN, V/MR | -0.3 | 6 | V | Operating Ratings | 3 | |
| Output Voltage, N Version (operating) | V/RST | -0.3 | 6 | V | Operating Ratings, N Version | 3 | |
| Supply Current | IDD | 3.5 | µA | VDD = VIN = VTH + 1.6%; Note 2; /MR, RST, /RST open | 3 | ||
| VDD Hysteresis Voltage | VHYST | 1 | % | 3 | |||
| IN Hysteresis Voltage | VHYST | 3 | mV | 3 | |||
| IN Input Current | IIN | 5 | pA | 3 | |||
| Propagation Delay (IN to reset) | tPROP | 20 | µs | VIN = (VREF(MAX) + 100 mV) to VIN = (VREF(MIN), 100 mV), /MR = open | 3 | ||
| /MR Propagation Delay | tPROP | 5 | µs | V/MR < (VIL, 100 mV) Note 2 | 4 | ||
| /MR Minimum Input Pulse Width | tMIN | 33 | ns | Reset occurs, V/MR < VIL | 4 | ||
| Thermal Resistance, SOT-23 5-Ld | θJA | 256 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
MIC2774N-46YM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic2774n-46ym5-tr-etched.step/mic2774n-46ym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2774n-46ym5-tr.step/mic2774n-46ym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
d8aa379ca98fe90c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).