main
Ray Publish 0.1.0 3812df3

MIC2774L-31YM5-TR

Microchip Tech · Monitors & Reset Circuits · SOT-23-5

MIC2774L-31YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /RST output Push-pull active-low reset output, asserted low whenever VIN or VDD falls below the threshold voltage and held for no fewer than 140 ms after VIN and VDD return above the threshold limits.
2 GND power_in Ground.
3 /MR input Manual reset input; driving it low initiates an immediate unconditional reset, with an internal pull-up to VDD so it may be left open if unused.
4 IN input Adjustable undervoltage detector input compared to the internal 300 mV reference, where an undervoltage condition triggers a reset sequence.
5 VDD power_in Power supply input for internal circuitry (1.5V to 5.5V operating) and input to the fixed-threshold voltage monitor, where an undervoltage condition triggers a reset sequence.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Undervoltage Threshold on VDD (code 31, VTH = 3.09V) VUV_THR -1.5 1.5 % VTH ±1.5%, VTH nominal 3.09V; See Table 5-1 3
IN Undervoltage Threshold VREF 295 300 305 mV Note 2 3
IN Input Current (over temperature) IIN 10 nA TMIN ≤ TA ≤ TMAX 3
Reset Pulse Width tRST 140 280 ms TMIN ≤ TA ≤ TMAX 3
RST or /RST Output Voltage Low VOL 0.3 V ISINK = 1.6 mA; VDD ≥ 1.6V 3
RST or /RST Output Voltage High VOH 0.8 V 0.8 × VDD; ISOURCE = 500 µA; VDD ≥ 1.5V 4
/MR Input High Voltage VIH 0.7 V 0.7 × VDD; Note 2 4
/MR Input Low Voltage VIL 0.3 V 0.3 × VDD; Note 2 4
/MR Internal Pull-Up Current IPU 100 250 nA 4
/MR Input Current IIN 100 250 nA V/MR < VIL 4
Supply Voltage (VDD) absolute maximum VDD -0.3 7 V 3
Input Voltages (VIN, V/MR) absolute maximum VIN, V/MR -0.3 7 V 3
Output Voltages (V/RST, VRST) absolute maximum V/RST, VRST -0.3 7 V 3
RST, /RST Current 20 mA 3
ESD Rating 1.5 kV Human body model, 1.5 kΩ in series with 100 pF 3
Supply Voltage (VDD) operating VDD 1.5 5.5 V 3
Input Voltages (VIN, V/MR) operating VIN, V/MR -0.3 6 V 3
Output Voltage (V/RST, VRST, H & L Versions) operating V/RST, VRST -0.3 V Upper limit VDD + 0.3V 3
Operating Ambient Temperature Range TA -40 85 °C Note 1 4
Storage Temperature Range TS -65 150 °C 4
Thermal Resistance, SOT-23 5-Ld θJA 256 °C/W 4
Supply Current IDD 3.5 µA VDD = VIN = VTH + 1.6%; Note 2; /MR, RST, /RST open 3
VDD Hysteresis Voltage VHYST 1 % 3
IN Hysteresis Voltage VHYST 3 mV 3
IN Input Current IIN 5 pA 3
Propagation Delay (IN to reset) tPROP 20 µs VIN = (VREF(MAX) + 100 mV) to VIN = (VREF(MIN), 100 mV), /MR = open 3
/MR Propagation Delay tPROP 5 µs V/MR < (VIL, 100 mV) Note 2 4
/MR Minimum Input Pulse Width tMIN 33 ns Reset occurs, V/MR < VIL 4

CAD (KiCad official)

  • Symbol: MIC2774L-31YM5-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mic2774l-31ym5-tr-etched.step / mic2774l-31ym5-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2774l-31ym5-tr.step / mic2774l-31ym5-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 d8aa379ca98fe90c, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF