main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic24066t-e: viewers · Ray
mic24066t-e-etched.glb Publish 0.1.0 · Ray
mic24066t-e-etched.step mic24066t-e: factory component page (tier=mfr) · Ray
mic24066t-e-hero.glb mic24066t-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mic24066t-e-hero.overlay.json Publish 0.1.0 · Ray
mic24066t-e.glb Publish 0.1.0 · Ray
mic24066t-e.kicad_mod Publish 0.1.0 · Ray
mic24066t-e.kicad_sym Publish 0.1.0 · Ray
mic24066t-e.lbr Publish 0.1.0 · Ray
mic24066t-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MIC24066T-E

Microchip Tech · DC-DC Converters · VQFN-36-EP(5x6)

MIC24066T-E from Microchip Tech, in a VQFN-36-EP(5x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected; leave pin unconnected.
2 PG output Open-drain power good output pulled low when output is below 10% of target; pull up to VDD through 10 kΩ, high when output is above 90% of target.
3 ILIM passive Current limit adjust input; connect a resistor from ILIM to the SW node to set the current limit.
4 AGND power_in Analog ground reference for the control logic; connect AGND to PGND at one point.
5 SW power_out Switch node output; connect all SW pins together and to one terminal of the inductor (also senses low-side MOSFET current for negative current limit).
6 BST passive Bootstrap supply for the high-side MOSFET driver; connect a 0.1 µF low ESR ceramic capacitor between BST and SW.
7 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
8 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
9 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
10 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
11 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
12 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
13 VIN power_in Power supply input to the internal high-side MOSFET; connect all VIN pins together with low ESR ceramic capacitors to PGND close to the IC.
14 NC unconnected Not connected; leave unconnected (datasheet also says it can be floating or grounded).
15 PGND power_in Power ground return for the low-side MOSFET and its driver; connect all PGND pins to the power ground plane.
16 PGND power_in Power ground return for the low-side MOSFET and its driver; connect all PGND pins to the power ground plane.
17 PGND power_in Power ground return for the low-side MOSFET and its driver; connect all PGND pins to the power ground plane.
18 PGND power_in Power ground return for the low-side MOSFET and its driver; connect all PGND pins to the power ground plane.
19 SW power_out Switch node output; connect all SW pins together and to one terminal of the inductor.
20 SW power_out Switch node output; connect all SW pins together and to one terminal of the inductor.
21 SW power_out Switch node output; connect all SW pins together and to one terminal of the inductor.
22 SW power_out Switch node output; connect all SW pins together and to one terminal of the inductor.
23 NC unconnected Not connected; leave unconnected (datasheet also says it can be floating or grounded).
24 PVDD power_out Internal high voltage LDO output supplying the low-side MOSFET driver and bootstrap capacitor; connect a minimum 4.7 µF low ESR ceramic capacitor to PGND.
25 AGND power_in Analog ground reference for the control logic; connect AGND to PGND at one point.
26 EXTVDD power_in Auxiliary LDO input; connect to a supply above 4.7V (typical) to bypass the internal LDO, or leave unconnected/grounded, with a minimum 1 µF capacitor to PGND when supplied.
27 EN input Enable logic input; connect to VIN or an external logic signal, high enables and low disables the device.
28 NC unconnected Not connected; leave pin unconnected.
29 FREQ input Frequency programming input; tie to VIN for 800 kHz or connect to the midpoint of a resistor divider from VIN to AGND to set switching frequency.
30 SS/MODE passive On MIC24066 a capacitor to AGND programs the output soft start time (on MIC24067 this pin selects HLL or CCM light-load mode).
31 FB input Feedback input; connect to the midpoint of a resistor divider from the output to AGND, regulated to 0.6V.
32 AGND power_in Analog ground reference for the control logic; connect AGND to PGND at one point.
33 AGND power_in Analog ground reference for the control logic; connect AGND to PGND at one point.
34 VDD power_in Bias supply for the internal control logic; connect to PVDD through a 2.2Ω series resistor with a minimum 2.2 µF low ESR ceramic capacitor to AGND.
35 SVIN power_in Supply input to the internal LDO; connect to VIN through a 2.2Ω series resistor with a minimum 1 µF low ESR ceramic capacitor to AGND.
36 NC unconnected Not connected; leave pin unconnected.
37 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package VQFN-36-EP(5x6)
Category Power Management
Pins 37

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
PVIN, SVIN Voltage Range VIN 4.5 36 V 6
Quiescent Supply Current IQ 300 600 µA VFBS = +1.5V, MODE = GND 6
Quiescent Supply Current (no switching) IQ 1.4 1.8 mA VFBS = +1.5V, No Switching 6
Shut Down Current ISD 5 10 µA Power from VIN, VEN = 0V 6
Shut Down Current (VDD powered) ISD 30 50 µA VIN = VDD = 5.5V, VEN = 0V 6
PVDD Output Voltage Range VDD 4.8 5.1 5.4 V SVIN = 7V to 36V, IPVDD < = 10 mA 6
VDD Undervoltage Lockout Upper Threshold VDDUV_R 3.7 4.2 4.5 V VDD rising 6
VDD UVLO Hysteresis VDDUV_HYS 600 mV Hysteresis 6
VDD Regulation ΔVDD 1 2.5 % VIN = 24V, IVDD from 1 mA to 40 mA (Note 5) 6
VDD Regulator Dropout Voltage VDROP_VDD 0.7 1.25 V SVIN = 5.5V, IPVDD = 25 mA 6
EXTVDD Switchover Voltage VSO_EXTVDD 4.4 4.6 4.8 V EXTVDD rising 6
EXTVDD Switchover Voltage Hysteresis VSO_HYS 200 mV Hysteresis 6
EXTVDD Dropout Voltage VDROP_EXTVDD 250 mV VEXTVDD = 5V, IPVDD = 25 mA 6
EXTVDD Leakage Current ILK_EXTVDD 0.1 µA VEXTVDD = 14V, VEN = 0V 6
Soft Start Period tSS 5 ms Fixed internal SS (MIC24067) 6
Soft Start Source Current ISS 0.8 1.3 3 µA Programmable SS (MIC24066) 6
Feedback Regulation Voltage VFB 0.597 0.6 0.603 V TJ = 25ºC 6
Feedback Regulation Voltage (over temperature) VFB 0.594 0.606 V -40ºC ≤ TJ ≤ +125ºC 6
FBS Bias Current IFBS 50 500 nA VFBS = +0.6V 6
Enable Threshold Voltage High VEN_THH 1.6 V Enable rising 6
Enable Threshold Voltage Low VEN_THL 0.6 V Enable falling 6
Enable Hysteresis VEN_HYS 150 mV 6
Enable Bias Current IEN 6 30 µA VEN = 12V 6
MODE Threshold Voltage High VMODE_THH 1.6 V MODE rising 7
MODE Threshold Voltage Low VMODE_THH 0.6 V MODE falling 7
MODE Hysteresis VMODE_HYS 150 mV VEN = 12V 7
Maximum Switching Frequency fSW_max 720 800 880 kHz VVIN = 12V, VFREQ = VVIN, R5 = 100k Ω; R6 = Open 7
Minimum Switching Frequency fSW_MIN 230 270 300 kHz VIN = 12V, VFREQ = 33% × VVIN, R5 = 100k Ω; R6 = 50k Ω 7
Maximum Switching Frequency fSW_max 800 kHz VIN = 12V, VOUTS = 5V 7
Minimum On-Time TONMIN 60 ns Measured in application 7
Minimum Off-Time TOFFMIN 100 200 300 ns VFBS = 0V 7
Maximum Duty Cycle DMAX 85 % fSW = 400 kHz, R5 = R6 = 100k Ω 7
Minimum Duty Cycle DMIN 0 % VFBS = +1V 7
Current-Limit Comparator Offset VOFFSET -15 0 15 mV VFB = 0.59V 7
ILIM Source Current ICL 115 µA TJ= 25°C 7
ILIM Source Current (over temperature) ICL 80 180 µA TJ= -140°C to 125°C 7
ILIM Source Current Tempco TCICL 0.3 µA/°C 7
Negative Current Limit Comparator Threshold 48 mV 7
High Side MOSFET On-Resistance RDSON_HS 22 mΩ 7
Low Side MOSFET On-Resistance RDSON_LS 8.5 mΩ 7
BST Leakage ILEAK(BST) 5 µA VIN = 45V 7
VIN Leakage ILEAK(VIN) 5 µA VIN = 45V 7
SW Leakage ILEAK(SW) 5 µA VIN = 45V 7
PG Threshold from Low to High VPG_TH 85 90 95 %VREF VFB rising 7
PG Threshold Hysteresis VPG_HYS 6 %VREF VFB falling 7
PG Delay tD_PG 100 µs VFB rising 7
PG Low State Voltage VPG_L 70 200 mV VFB < 90% × VNOM, IPG = 1 mA 8
PG Leakage Current ILEAK(PG) 100 nA VPG = 5.5V 8
Thermal Shutdown Threshold TSD 160 °C TJ rising 8
Thermal Shutdown Hysteresis TSD_HYS 20 °C 8
SVIN, PVIN to PGND -0.3 45 V 5
VDD, PVDD to PGND -0.3 6 V 5
BST to SW -0.3 12 V 5
EXTVDD to AGND -0.3 14 V 5
Maximum Junction Temperature TJ 150 °C 5
Storage Temperature TS -65 150 °C 5
Operating Junction Temperature TJ -40 125 °C 5
PVDD, VDD Pin Voltage 4.3 5.5 V 5
Thermal Resistance Junction to Ambient θJA 33.7 °C/W 8
Thermal Resistance Junction to Case (Top) θJC(Top) 31.2 °C/W 8

CAD (KiCad official)

  • Symbol: MIC24066T-E
  • Footprint: Package_DFN_QFN:QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.6mm
  • 3D model: VQFN-36-EP(5x6) (KiCad packages3D, STEP)
  • 3D model files: mic24066t-e-etched.step / mic24066t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic24066t-e.step / mic24066t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (38 pp, sha256 365d37f2949ec8af, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF