main
Ray Publish 0.1.0 cb7c54a

MIC2289C-34YD6-TR

Microchip Tech · LED Drivers · TSOT-23-6L

MIC2289C-34YD6-TR from Microchip Tech, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW passive Switch node (input) connected to the internal bipolar power transistor collector; absolute maximum switch voltage is -0.3V to 34V and switch current limit is 750mA typical.
2 GND power_in Ground return for the regulator.
3 FB input Feedback input that senses the LED current; connect the LED cathode here with a resistor to ground setting the LED current, regulated to 95mV (85 to 105mV).
4 EN input Enable input where logic high (above 1.5V) enables the regulator and logic low (below 0.4V) shuts it down.
5 VIN power_in Supply input for the internal circuitry, operating range 2.5V to 10V (pin table states 2.7V to 8V).
6 OUT output Output and overvoltage protection pin connected to the output capacitor and LEDs; OVP clamps at 32V typical (27V to 37V) for the -34 option.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSOT-23-6L
Category Nixie Tube Driver/LED Driver
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (absolute max) VIN 12 V 3
Switch Voltage VSW -0.3 34 V 3
Enable Pin Voltage VEN -0.3 V -0.3V to VIN 3
FB Voltage VFB 6 V 3
Switch Current ISW 2 A 3
Ambient Storage Temperature Ts -65 150 °C 3
Schottky Reverse Voltage VDA 34 V 3
ESD Rating 2 kV Human body model 3
Supply Voltage (operating) VIN 2.5 10 V 3
Junction Temperature TJ -40 125 °C 3
Supply Voltage Range VIN 2.5 10 V 3
Under Voltage Lockout VUVLO 1.8 2.1 2.4 V 3
Quiescent Current IVIN 2.5 5 mA VFB > 200mV, (not switching) 3
Shutdown Current ISD 0.1 1 µA VEN = 0V 3
Feedback Voltage (±10%) VFB 85 95 105 mV 3
Feedback Input Current IFB -450 nA VFB = 95mV 3
Line Regulation 0.5 % 3V ≤ VIN ≤ 5V 3
Load Regulation 0.5 % 5mA ≤ IOUT ≤ 20mA 3
Maximum Duty Cycle DMAX 85 90 % 3
Switch Current Limit ISW 750 mA 3
Switch Saturation Voltage VSW 450 mV ISW = 0.5A 3
Switch Leakage Current ISW 0.01 5 µA VEN = 0V, VSW = 10V 3
Enable Threshold TURN ON VEN 1.5 V TURN ON 3
Enable Threshold TURN OFF VEN 0.4 V TURN OFF 3
Enable Pin Current IEN 20 40 µA VEN = 10V 3
Oscillator Frequency fSW 1.05 1.2 1.35 MHz 3
Schottky Forward Drop VD 0.8 1 V ID = 150mA 3
Schottky Leakage Current IRD 4 µA VR = 30V 3
Overvoltage Protection VOVP 27 32 37 V MIC2289C-34YD6 only 3
Overtemperature Threshold TJ 150 °C Shutdown 3
Overtemperature Hysteresis TJ 10 °C Hysteresis 3

CAD (KiCad official)

  • Symbol: MIC2289C-34YD6-TR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: mic2289c-34yd6-tr-etched.step / mic2289c-34yd6-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2289c-34yd6-tr.step / mic2289c-34yd6-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (9 pp, sha256 971b10135f660a8a, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF