3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC2287-34YML-TR
Microchip Tech · LED Drivers · DFN-8-EP(2x2)
MIC2287-34YML-TR from Microchip Tech, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OVP | input | Overvoltage protection input that connects to the output; the 34V option (MIC2287-34) trips at 30V min, 32V typ, 34V max. |
| 2 | VIN | power_in | Supply input for the internal circuitry, 2.5V to 10V. |
| 3 | EN | input | Enable input: logic high enables the regulator and logic low shuts it down (turn-on threshold 1.5V, turn-off threshold 0.4V). |
| 4 | AGND | power_in | Analog ground. |
| 5 | NC | unconnected | No connect, with no internal connection to the die. |
| 6 | FB | input | Feedback input that senses the output; connect the LED cathode here, and a resistor to ground sets the LED current (95mV nominal feedback voltage). |
| 7 | SW | passive | Switch node, the internal power bipolar collector (switch voltage -0.3V to 34V, 2A max switch current). |
| 8 | PGND | power_in | Power ground. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-8-EP(2x2) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VIN | 2.5 | 10 | V | 3 | ||
| Under Voltage Lockout | VUVLO | 1.8 | 2.1 | 2.4 | V | 3 | |
| Quiescent Current | IVIN | 2.5 | 5 | mA | VFB > 200mV, (not switching) | 3 | |
| Shutdown Current | ISD | 0.1 | 1 | µA | VEN = 0V | 3 | |
| Feedback Voltage (±5%) | VFB | 90 | 95 | 100 | mV | 3 | |
| Feedback Input Current | IFB | -450 | nA | VFB = 95mV | 3 | ||
| Line Regulation | 0.5 | 1 | % | 3V ≤ VIN ≤ 5V | 3 | ||
| Load Regulation | 0.5 | 2 | % | 5mA ≤ IOUT ≤ 20mA | 3 | ||
| Maximum Duty Cycle | DMAX | 85 | 90 | % | 3 | ||
| Switch Current Limit | ISW | 750 | mA | 3 | |||
| Switch Saturation Voltage | VSW | 450 | mV | ISW = 0.5A | 3 | ||
| Switch Leakage Current | ISW | 0.01 | 5 | µA | VEN = 0V, VSW = 10V | 3 | |
| Enable Threshold Turn On | VEN | 1.5 | V | TURN ON | 3 | ||
| Enable Threshold Turn Off | VEN | 0.4 | V | TURN OFF | 3 | ||
| Enable Pin Current | IEN | 20 | 40 | µA | VEN = 10V | 3 | |
| Oscillator Frequency | fSW | 1.05 | 1.2 | 1.35 | MHz | 3 | |
| Overvoltage Protection | VOVP | 30 | 32 | 34 | V | MIC2287BML-34 only | 3 |
| Overtemperature Threshold | TJ | 150 | °C | 3 | |||
| Overtemperature Shutdown Hysteresis | TJ | 10 | °C | 3 | |||
| Supply Voltage (absolute max) | VIN | 12 | V | 3 | |||
| Switch Voltage | VSW | -0.3 | 34 | V | 3 | ||
| Enable Pin Voltage | VEN | -0.3 | V | upper limit VIN | 3 | ||
| FB Voltage | VFB | 6 | V | 3 | |||
| Switch Current | ISW | 2 | A | 3 | |||
| Ambient Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| ESD Rating | 2 | kV | Human body model | 3 | |||
| Operating Supply Voltage | VIN | 2.5 | 10 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Package Thermal Impedance 2mm × 2mm MLF | θJA | 93 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
MIC2287-34YML-TR - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
mic2287-34yml-tr-etched.step/mic2287-34yml-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2287-34yml-tr.step/mic2287-34yml-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (10 pp, sha256
de67eae3c76d1222, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).