main
Ray
Publish 0.1.0
d59a2fe
MIC2182-3.3YM
Microchip Tech · DC-DC Converters · SOP-16
MIC2182-3.3YM from Microchip Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS | passive | Soft-start pin: an external capacitor to ground slows the output rise, charged by an internal 5µA source toward VDD. |
| 2 | PWM | input | Low sets PWM-mode operation, and a 1nF capacitor to ground selects automatic PWM/skip-mode operation. |
| 3 | COMP | output | Internal error amplifier output that connects to a capacitor or series RC network to compensate the control loop. |
| 4 | SGND | power_in | Small-signal ground return, routed separately to the negative terminal of COUT. |
| 5 | SYNC | input | Optional oscillator sync input whose leading edge above threshold terminates the switching cycle; connect to SGND if unused. |
| 6 | EN/UVLO | input | Enable and accurate undervoltage lockout input; below the 2.5V threshold switching is disabled and below threshold the part enters micropower shutdown (<0.1µA). |
| 7 | VREF | power_in | 1.245V reference voltage output that requires a 0.1µF capacitor to ground. |
| 8 | CSH | input | Current-sense high input and noninverting current-limit comparator input, with a built-in 100mV offset from VOUT setting the current-limit threshold. |
| 9 | VOUT | input | Current-sense low and output voltage feedback input, serving as the inverting input for the current limit comparator and current sense amplifier. |
| 10 | VIN | power_in | Unregulated input supply, +4.5V to +32V. |
| 11 | VDD | power_out | 5V internal linear regulator output used as MOSFET gate drive supply and internal bus, bypassed to SGND with 4.7µF and able to supply up to 5mA external load. |
| 12 | PGND | power_in | MOSFET driver power ground return, connected to the synchronous MOSFET source and the negative terminal of CIN. |
| 13 | LSD | output | High-current low-side driver output for the external synchronous MOSFET, swinging between ground and VDD. |
| 14 | BST | input | Boost input providing high-side MOSFET drive voltage, higher than the input voltage by VDD minus a diode drop. |
| 15 | VSW | passive | Switch return for the high-side MOSFET driver. |
| 16 | HSD | output | High-current high-side driver output for the high-side MOSFET, swinging between ground and VIN + 5V minus the diode drop. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOP-16 |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.267 | 3.3 | 3.333 | V | 4 | |
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | 4 | |
| Output Voltage | VOUT | 3.201 | 3.3 | 3.399 | V | 4.5V < VIN < 32V, 0 < VCSH, VOUT < 75mV | 4 |
| PWM Mode Supply Current | 1.6 | 2.5 | mA | VPWM = 0V, excluding external MOSFET gate drive current | 4 | ||
| Skip Mode Supply Current | 600 | 1500 | µA | IL = 0mA, VPWM floating (1nF capacitor to ground) | 4 | ||
| Shutdown Quiescent Current | 0.1 | 5 | µA | VEN/UVLO = 0V | 4 | ||
| Digital Supply Voltage (VDD) | VDD | 4.7 | 5.3 | V | IL = 0mA to 5mA | 4 | |
| Reference Voltage | VREF | 1.22 | 1.245 | 1.27 | V | Fixed versions only | 5 |
| Enable Input Threshold | 0.6 | 1.1 | 1.6 | V | 5 | ||
| UVLO Threshold | 2.2 | 2.5 | 2.8 | V | 5 | ||
| Enable Input Current | 0.1 | 5 | µA | VEN/UVLO = 5V | 5 | ||
| Soft-Start Current | -3.5 | -5 | -6.5 | µA | VSS = 0V | 5 | |
| Current-Limit Threshold Voltage | 75 | 100 | 135 | mV | VCSH = VOUT | 5 | |
| Oscillator Frequency | 270 | 300 | 330 | kHz | 5 | ||
| SYNC Threshold Level | 0.7 | 1.3 | 1.9 | V | 5 | ||
| SYNC Input Current | 0.1 | 5 | µA | VSYNC = 5V | 5 | ||
| Frequency Foldback Threshold | 0.75 | 0.95 | 1.15 | V | measured at VOUT pin | 5 | |
| Output Driver Impedance (source) | 5 | 8.5 | Ω | source | 5 | ||
| Output Driver Impedance (sink) | 3.5 | 6 | Ω | sink | 5 | ||
| Minimum On-Time | 140 | 250 | ns | VOUT = VOUT(nominal) + 200mV | 5 | ||
| Analog Supply Voltage (VIN) | VIN | 34 | V | 4 | |||
| Digital Supply Voltage (VDD) | VDD | 7 | V | 4 | |||
| Sense Voltage (VOUT, CSH) | -0.3 | 7 | V | 4 | |||
| Sync Pin Voltage (VSYNC) | VSYNC | -0.3 | 7 | V | 4 | ||
| Power Dissipation (PD) SOP | PD | 400 | mW | @ TA = 85°C | 4 | ||
| Ambient Storage Temperature (TS) | TS | -65 | 150 | °C | 4 | ||
| Analog Supply Voltage (VIN) | VIN | 4.5 | 32 | V | 4 | ||
| Ambient Temperature (TA) | TA | -40 | 85 | °C | 4 | ||
| Junction Temperature (TJ) | TJ | -40 | 125 | °C | 4 | ||
| Package Thermal Resistance SOP | θJA | 100 | °C/W | 4 | |||
| Output Voltage Total Regulation | 0.8 | % | 0mV < (VCSH, VOUT) < 75mV (full load range), 4.5V < VIN < 32V | 4 | |||
| Output Voltage Line Regulation | 0.03 | %/V | VIN = 4.5V to 32V, VCSH, VOUT = 50mV | 4 | |||
| Output Voltage Load Regulation | 0.5 | % | 25mV < (VCSH, VOUT) < 75mV (PWM mode only) | 4 | |||
| Digital Supply Undervoltage Lockout VDD upper threshold (turn on) | VDD | 4.2 | V | 4 | |||
| Digital Supply Undervoltage Lockout VDD lower threshold (turn off) | VDD | 4.1 | V | 4 | |||
| Reference Line Regulation | VREF | 1 | mV | 6V < VIN < 32V | 5 | ||
| Reference Load Regulation | VREF | 2 | mV | 0µA < IREF < 100µA | 5 | ||
| Current Sense Amplifier Gain | 2 | 5 | |||||
| Error Sense Amplifier Gain | 20 | 5 | |||||
| Maximum Duty Cycle | 86 | % | 5 | ||||
| SYNC Minimum Pulse Width | 200 | ns | 5 | ||||
| SYNC Capture Range | 330 | kHz | 5 | ||||
| Foldback Frequency | 60 | kHz | 5 | ||||
| Rise/Fall Time | 60 | ns | CL = 3000pF | 5 | |||
| Driver Nonoverlap Time | 80 | ns | 5 | ||||
| PWM Input Current | -10 | µA | VPWM = 0V | 5 |
CAD (KiCad official)
- Symbol:
MIC2182-3.3YM - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
mic2182-3-3ym-etched.step/mic2182-3-3ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2182-3-3ym.step/mic2182-3-3ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
787436724457805c, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC2182-3.3YM
**Microchip Tech** · DC-DC Converters · SOP-16
MIC2182-3.3YM from Microchip Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS | passive | Soft-start pin: an external capacitor to ground slows the output rise, charged by an internal 5µA source toward VDD. |
| 2 | PWM | input | Low sets PWM-mode operation, and a 1nF capacitor to ground selects automatic PWM/skip-mode operation. |
| 3 | COMP | output | Internal error amplifier output that connects to a capacitor or series RC network to compensate the control loop. |
| 4 | SGND | power_in | Small-signal ground return, routed separately to the negative terminal of COUT. |
| 5 | SYNC | input | Optional oscillator sync input whose leading edge above threshold terminates the switching cycle; connect to SGND if unused. |
| 6 | EN/UVLO | input | Enable and accurate undervoltage lockout input; below the 2.5V threshold switching is disabled and below threshold the part enters micropower shutdown (<0.1µA). |
| 7 | VREF | power_in | 1.245V reference voltage output that requires a 0.1µF capacitor to ground. |
| 8 | CSH | input | Current-sense high input and noninverting current-limit comparator input, with a built-in 100mV offset from VOUT setting the current-limit threshold. |
| 9 | VOUT | input | Current-sense low and output voltage feedback input, serving as the inverting input for the current limit comparator and current sense amplifier. |
| 10 | VIN | power_in | Unregulated input supply, +4.5V to +32V. |
| 11 | VDD | power_out | 5V internal linear regulator output used as MOSFET gate drive supply and internal bus, bypassed to SGND with 4.7µF and able to supply up to 5mA external load. |
| 12 | PGND | power_in | MOSFET driver power ground return, connected to the synchronous MOSFET source and the negative terminal of CIN. |
| 13 | LSD | output | High-current low-side driver output for the external synchronous MOSFET, swinging between ground and VDD. |
| 14 | BST | input | Boost input providing high-side MOSFET drive voltage, higher than the input voltage by VDD minus a diode drop. |
| 15 | VSW | passive | Switch return for the high-side MOSFET driver. |
| 16 | HSD | output | High-current high-side driver output for the high-side MOSFET, swinging between ground and VIN + 5V minus the diode drop. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOP-16 |
| Category | Power Supply Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.267 | 3.3 | 3.333 | V | | 4 |
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | | 4 |
| Output Voltage | VOUT | 3.201 | 3.3 | 3.399 | V | 4.5V < VIN < 32V, 0 < VCSH, VOUT < 75mV | 4 |
| PWM Mode Supply Current | | | 1.6 | 2.5 | mA | VPWM = 0V, excluding external MOSFET gate drive current | 4 |
| Skip Mode Supply Current | | | 600 | 1500 | µA | IL = 0mA, VPWM floating (1nF capacitor to ground) | 4 |
| Shutdown Quiescent Current | | | 0.1 | 5 | µA | VEN/UVLO = 0V | 4 |
| Digital Supply Voltage (VDD) | VDD | 4.7 | | 5.3 | V | IL = 0mA to 5mA | 4 |
| Reference Voltage | VREF | 1.22 | 1.245 | 1.27 | V | Fixed versions only | 5 |
| Enable Input Threshold | | 0.6 | 1.1 | 1.6 | V | | 5 |
| UVLO Threshold | | 2.2 | 2.5 | 2.8 | V | | 5 |
| Enable Input Current | | | 0.1 | 5 | µA | VEN/UVLO = 5V | 5 |
| Soft-Start Current | | -3.5 | -5 | -6.5 | µA | VSS = 0V | 5 |
| Current-Limit Threshold Voltage | | 75 | 100 | 135 | mV | VCSH = VOUT | 5 |
| Oscillator Frequency | | 270 | 300 | 330 | kHz | | 5 |
| SYNC Threshold Level | | 0.7 | 1.3 | 1.9 | V | | 5 |
| SYNC Input Current | | | 0.1 | 5 | µA | VSYNC = 5V | 5 |
| Frequency Foldback Threshold | | 0.75 | 0.95 | 1.15 | V | measured at VOUT pin | 5 |
| Output Driver Impedance (source) | | | 5 | 8.5 | Ω | source | 5 |
| Output Driver Impedance (sink) | | | 3.5 | 6 | Ω | sink | 5 |
| Minimum On-Time | | | 140 | 250 | ns | VOUT = VOUT(nominal) + 200mV | 5 |
| Analog Supply Voltage (VIN) | VIN | | | 34 | V | | 4 |
| Digital Supply Voltage (VDD) | VDD | | | 7 | V | | 4 |
| Sense Voltage (VOUT, CSH) | | -0.3 | | 7 | V | | 4 |
| Sync Pin Voltage (VSYNC) | VSYNC | -0.3 | | 7 | V | | 4 |
| Power Dissipation (PD) SOP | PD | | | 400 | mW | @ TA = 85°C | 4 |
| Ambient Storage Temperature (TS) | TS | -65 | | 150 | °C | | 4 |
| Analog Supply Voltage (VIN) | VIN | 4.5 | | 32 | V | | 4 |
| Ambient Temperature (TA) | TA | -40 | | 85 | °C | | 4 |
| Junction Temperature (TJ) | TJ | -40 | | 125 | °C | | 4 |
| Package Thermal Resistance SOP | θJA | | 100 | | °C/W | | 4 |
| Output Voltage Total Regulation | | | 0.8 | | % | 0mV < (VCSH, VOUT) < 75mV (full load range), 4.5V < VIN < 32V | 4 |
| Output Voltage Line Regulation | | | 0.03 | | %/V | VIN = 4.5V to 32V, VCSH, VOUT = 50mV | 4 |
| Output Voltage Load Regulation | | | 0.5 | | % | 25mV < (VCSH, VOUT) < 75mV (PWM mode only) | 4 |
| Digital Supply Undervoltage Lockout VDD upper threshold (turn on) | VDD | | 4.2 | | V | | 4 |
| Digital Supply Undervoltage Lockout VDD lower threshold (turn off) | VDD | | 4.1 | | V | | 4 |
| Reference Line Regulation | VREF | | 1 | | mV | 6V < VIN < 32V | 5 |
| Reference Load Regulation | VREF | | 2 | | mV | 0µA < IREF < 100µA | 5 |
| Current Sense Amplifier Gain | | | 2 | | | | 5 |
| Error Sense Amplifier Gain | | | 20 | | | | 5 |
| Maximum Duty Cycle | | | 86 | | % | | 5 |
| SYNC Minimum Pulse Width | | | 200 | | ns | | 5 |
| SYNC Capture Range | | | 330 | | kHz | | 5 |
| Foldback Frequency | | | 60 | | kHz | | 5 |
| Rise/Fall Time | | | 60 | | ns | CL = 3000pF | 5 |
| Driver Nonoverlap Time | | | 80 | | ns | | 5 |
| PWM Input Current | | | -10 | | µA | VPWM = 0V | 5 |
## CAD (KiCad official)
- Symbol: `MIC2182-3.3YM`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `mic2182-3-3ym-etched.step` / `mic2182-3-3ym-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic2182-3-3ym.step` / `mic2182-3-3ym.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic2182-3-3ym-datasheet.pdf) (28 pp, sha256 `787436724457805c`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic2182-3-3ym-datasheet.pdf)