Generated by kicad-footprint-generator · KiCad file format 20260206
MIC2075-2YM
Microchip Tech · Power Management Specialized - PMIC · SOIC-8
MIC2075-2YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Switch enable input; on the -2 (active-low) variant the switch is on when VEN is at or below 0.8V and off when VEN is at or above 2.4V, with input current of 1 µA maximum for VEN from 0V to 5.5V. |
| 2 | FLG | output | Active-low, open-drain fault flag that asserts on overcurrent (only after the tD flag response delay, typically 3 ms) or thermal shutdown. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | NC | unconnected | Not internally connected. |
| 5 | NC | unconnected | Not internally connected. |
| 6 | OUT | power_out | Switch output (source of the output MOSFET); pins 6 and 8 must be connected together, and output current is internally limited. |
| 7 | IN | power_in | Supply voltage input (drain of the output MOSFET and logic supply), specified for +2.7V to +5.5V operation with a 0.1 µF to 1 µF bypass capacitor placed close to VIN and GND. |
| 8 | OUT | power_out | Switch output (source of the output MOSFET); pins 6 and 8 must be connected together, and output current is internally limited. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VIN) | VIN | -0.3 | 6 | V | 3 | ||
| Fault Flag Voltage | VFLG | 6 | V | 3 | |||
| Fault Flag Current | IFLG | 25 | mA | 3 | |||
| Output Voltage | VOUT | 6 | V | 3 | |||
| Enable Input | IEN | -0.3 | V | 3 | |||
| Supply Voltage (VIN) operating range | VIN | 2.7 | 5.5 | V | 3 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Supply Current (switch off, MIC20x5-2) | IDD | 0.75 | 5 | µA | MIC20x5-2, VEN ≥ 2.4V (switch off), OUT = open | 3 | |
| Supply Current (switch on, MIC20x5-2) | IDD | 160 | µA | MIC20x5-2, VEN ≤ 0.8V (switch on), OUT = open | 3 | ||
| Enable Input Voltage (Low-to-High Transition) | VEN | 2.1 | 2.4 | V | Low-to-High Transition | 3 | |
| Enable Input Voltage (High-to-Low Transition) | VEN | 0.8 | 1.9 | V | High-to-Low Transition | 3 | |
| Enable Input Current | IEN | -1 | 0.01 | 1 | µA | VEN = 0V to 5.5V | 3 |
| Control Input Capacitance | 1 | pF | 3 | ||||
| Switch Resistance RDS(ON) | RDS(ON) | 90 | 140 | mΩ | VIN = 5V, IOUT = 500 mA | 3 | |
| Switch Resistance RDS(ON) | RDS(ON) | 100 | 160 | mΩ | VIN = 3.3V, IOUT = 500 mA | 3 | |
| Output Leakage Current | 10 | µA | MIC2025/2075 (output off) | 3 | |||
| Output Turn-On Delay | tON | 1 | 2.5 | 6 | ms | RL = 10Ω, CL = 1 µF, (see Timing Diagrams) | 3 |
| Output Turn-On Rise Time | tR | 0.5 | 2.3 | 5.9 | ms | RL = 10Ω, CL = 1 µF, (see Timing Diagrams) | 3 |
| Output Turn-Off Delay | tOFF | 50 | 100 | µs | RL = 10Ω, CL = 1 µF, (see Timing Diagrams) | 3 | |
| Output Turn-Off Fall Time | tF | 50 | 100 | µs | RL = 10Ω, CL = 1 µF, (see Timing Diagrams) | 4 | |
| Short-Circuit Output Current | ILIMIT | 0.5 | 0.7 | 1.25 | A | VOUT = 0V, enabled into short-circuit | 4 |
| Current-Limit Threshold | 0.6 | 0.85 | 1.25 | A | Ramped load applied to output | 4 | |
| Overcurrent Flag Response Delay (VIN = 5V) | tD | 1.5 | 3 | 7 | ms | VIN = 5V, apply VOUT = 0V until FLG low | 4 |
| Overcurrent Flag Response Delay (VIN = 3.3V) | tD | 1.5 | 3 | 8 | ms | VIN = 3.3V, apply VOUT = 0V until FLG low | 4 |
| Undervoltage Lockout Threshold (VIN Rising) | 2.2 | 2.5 | 2.7 | V | VIN Rising | 4 | |
| Undervoltage Lockout Threshold (VIN Falling) | 2 | 2.3 | 2.5 | V | VIN Falling | 4 | |
| Error Flag Output Resistance (VIN = 5V) | 8 | 25 | Ω | IL = 10 mA, VIN = 5V | 4 | ||
| Error Flag Output Resistance (VIN = 3.3V) | 11 | 40 | Ω | IL = 10 mA, VIN = 3.3V | 4 | ||
| Error Flag Off Current | 10 | µA | VFLAG = 5V | 4 | |||
| Thermal Resistance SOIC 8-LD | JA | 160 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC2075-2YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic2075-2ym-etched.step/mic2075-2ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2075-2ym.step/mic2075-2ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
0983db62f9be84e2, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).