main
Ray Publish 0.1.0 95b2df9

MIC2075-1YMM-TR

Microchip Tech · Power Management Specialized - PMIC · MSOP-8

MIC2075-1YMM-TR from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Switch enable input, active-high for the -1 option and active-low for the -2 option (MIC2075-1 is active-high; logic thresholds about 2.1V rising and 1.9V falling typical).
2 FLG output Active-low open-drain fault flag output that indicates overcurrent or thermal shutdown, and asserts only after an overcurrent condition exceeds the tD delay (typically 3 ms).
3 GND power_in Ground.
4 NC unconnected Not internally connected.
5 NC unconnected Not internally connected.
6 OUT power_out Switch output (source of the output MOSFET) that must be connected together with the other OUT pin (pin 8).
7 IN power_in Supply voltage input (2.7V to 5.5V operating range) feeding the logic circuitry and the drain of the output MOSFET.
8 OUT power_out Switch output (source of the output MOSFET) that must be connected together with the other OUT pin (pin 6).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (switch off) IDD 0.75 5 µA MIC20x5-1, VEN ≤ 0.8V (switch off), OUT = open 3
Supply Current (switch on) IDD 160 µA MIC20x5-1, VEN ≥ 2.4V (switch on), OUT = open 3
Enable Input Voltage Low-to-High VEN 2.1 2.4 V Low-to-High Transition 3
Enable Input Voltage High-to-Low VEN 0.8 1.9 V High-to-Low Transition 3
Enable Input Current IEN -1 0.01 1 µA VEN = 0V to 5.5V 3
Switch Resistance RDS(ON) 90 140 mΩ VIN = 5V, IOUT = 500 mA 3
Switch Resistance RDS(ON) 100 160 mΩ VIN = 3.3V, IOUT = 500 mA 3
Output Leakage Current 10 µA MIC2025/2075 (output off) 3
Output Turn-On Delay tON 1 2.5 6 ms RL = 10Ω, CL = 1 µF, (see Timing Diagrams) 3
Output Turn-On Rise Time tR 0.5 2.3 5.9 ms RL = 10Ω, CL = 1 µF, (see Timing Diagrams) 3
Output Turn-Off Delay tOFF 50 100 µs RL = 10Ω, CL = 1 µF, (see Timing Diagrams) 3
Output Turn-Off Fall Time tF 50 100 µs RL = 10Ω, CL = 1 µF, (see Timing Diagrams) 4
Short-Circuit Output Current ILIMIT 0.5 0.7 1.25 A VOUT = 0V, enabled into short-circuit 4
Current-Limit Threshold 0.6 0.85 1.25 A Ramped load applied to output 4
Overcurrent Flag Response Delay tD 1.5 3 7 ms VIN = 5V, apply VOUT = 0V until FLG low 4
Overcurrent Flag Response Delay tD 1.5 3 8 ms VIN = 3.3V, apply VOUT = 0V until FLG low 4
Undervoltage Lockout Threshold 2.2 2.5 2.7 V VIN Rising 4
Undervoltage Lockout Threshold 2 2.3 2.5 V VIN Falling 4
Error Flag Output Resistance 8 25 Ω IL = 10 mA, VIN = 5V 4
Error Flag Output Resistance 11 40 Ω IL = 10 mA, VIN = 3.3V 4
Error Flag Off Current 10 µA VFLAG = 5V 4
Supply Voltage (absolute max) VIN -0.3 6 V 3
Fault Flag Voltage VFLG 6 V 3
Fault Flag Current IFLG 25 mA 3
Output Voltage VOUT 6 V 3
Enable Input IEN -0.3 6 V -0.3V to VIN + 3V 3
Supply Voltage (operating) VIN 2.7 5.5 V Operating Ratings 3
Storage Temperature Range TS -65 150 °C 5
Ambient Temperature Range TA -40 85 °C 5
Thermal Resistance MSOP 8-LD θJA 206 °C/W 5
Enable Input Hysteresis 200 mV 3
OFF Current in Latched Thermal Shutdown 50 µA MIC2075 (during thermal shutdown state) 3
Overtemperature Threshold increasing 140 °C TJ increasing 4
Overtemperature Threshold decreasing 120 °C TJ decreasing 4

CAD (KiCad official)

  • Symbol: MIC2075-1YMM-TR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic2075-1ymm-tr-etched.step / mic2075-1ymm-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2075-1ymm-tr.step / mic2075-1ymm-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 0983db62f9be84e2, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF