MIC2026A-1YM

{
  "slug": "mic2026a-1ym",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "mic2026a-1ym",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic2026a-1ym.kicad_sym",
    "mic2026a-1ym.kicad_mod",
    "mic2026a-1ym.glb",
    "mic2026a-1ym.step",
    "mic2026a-1ym.lbr",
    "docs/hero.png",
    "docs/mic2026a-1ym-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic2026a-1ym-hero.glb",
    "mic2026a-1ym-hero.overlay.json",
    "mic2026a-1ym-etched.glb"
  ],
  "component": {
    "mpn": "MIC2026A-1YM",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917412704505856",
    "parts": {
      "symbol": "mic2026a-1ym.kicad_sym",
      "footprint": "mic2026a-1ym.kicad_mod",
      "model_3d": "mic2026a-1ym-hero.glb",
      "model_3d_plain": "mic2026a-1ym-etched.glb",
      "model_3d_step": "mic2026a-1ym-etched.step",
      "model_3d_step_plain": "mic2026a-1ym.step",
      "lbr": "mic2026a-1ym.lbr"
    },
    "distributor_links": {
      "lcsc": "C71594"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T23:57:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ENA",
        "type": "input",
        "description": "Switch A enable input is logic-compatible and active high on the -1 variant (MIC2026A-1YM), so the switch is on when driven high."
      },
      {
        "number": "2",
        "name": "FLGA",
        "type": "output",
        "description": "Fault Flag A is an active-low open-drain output that goes LOW for overcurrent lasting longer than the flag response delay tD or for thermal shutdown, and it may be left floating though fault reporting is then lost."
      },
      {
        "number": "3",
        "name": "FLGB",
        "type": "output",
        "description": "Fault Flag B is an active-low open-drain output that goes LOW for overcurrent lasting longer than the flag response delay tD or for thermal shutdown, and it may be left floating though fault reporting is then lost."
      },
      {
        "number": "4",
        "name": "ENB",
        "type": "input",
        "description": "Switch B enable input is logic-compatible and active high on the -1 variant (MIC2026A-1YM), so the switch is on when driven high."
      },
      {
        "number": "5",
        "name": "OUTB",
        "type": "output",
        "description": "Switch B output is the source of the output MOSFET that delivers current from IN to the load when enabled."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Switch and logic supply input, specified for 2.7 V to 5.5 V operation and bypassed close to IN and GND with 0.1 µF to 1 µF."
      },
      {
        "number": "8",
        "name": "OUTA",
        "type": "output",
        "description": "Switch A output is the source of the output MOSFET that delivers current from IN to the load when enabled."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers are taken from the Pin Description table on page 2, which matches the pin configuration ; The text for the flag delay symbol is garbled in the extraction (rendered as tB DB); the description"
        ],
        "pages_sent": 16,
        "cost_usd": 0.052,
        "at": "2026-10-21T23:55:30"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917412704505856",
        "pages": 16,
        "sha256": "4a372f65b541ff93",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic2026a-1ym.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic2026a-1ym-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a1a4a2ba4cf8f38dddd9c6e7a36fdedf26188041d26ec1b15a4bd7efdd0c391",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}