main
Ray
Publish 0.1.0
26e6b89
MIC2005-0.8LYM5-TR
Microchip Tech · Pre-ordered MCUs · SOT-23-5
MIC2005-0.8LYM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input that powers both the output switch and the internal control circuitry (operating range 2.5V to 5.5V, UVLO rising threshold 2V min / 2.25V typ / 2.5V max). |
| 2 | GND | power_in | Ground. |
| 3 | ENABLE | input | Switch enable input; logic low accepted at VIL max 0.5V and logic high at VIH min 1.5V, with the MIC2005L variant listed as active-low enable. |
| 4 | FAULT/ | output | Open-drain fault status output that goes low when the switch is current limiting or shut down by thermal protection, allowing logical OR'ing of multiple switches. |
| 5 | VOUT | power_out | Switch output to which the load is connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Switch Input Voltage | VIN | 2.5 | 5.5 | V | 5 | ||
| Output Leakage Current | ILEAK | 12 | 100 | µA | Switch = OFF, VOUT = 0V | 5 | |
| Supply Current, switch ON | IIN | 80 | 330 | µA | Switch = ON | 6 | |
| Supply Current, switch OFF (active-low enable, VEN = 1.5V) | IIN | 8 | 15 | µA | Switch = OFF, Active-Low Enable, VEN = 1.5V | 6 | |
| Supply Current, switch OFF (active-high enable, VEN = 0V) | IIN | 1 | 5 | µA | Switch = OFF, Active-High Enable, VEN = 0V | 6 | |
| Power Switch Resistance | RDS(ON) | 70 | 100 | mΩ | VIN = 5V, IOUT = 100 mA | 6 | |
| Power Switch Resistance (full temperature) | RDS(ON) | 125 | mΩ | VIN = 5V, IOUT = 100 mA | 6 | ||
| Fixed Current Limit (0.8 option) | ILIMIT | 0.8 | 1.1 | 1.5 | A | -0.8, VOUT = 0.8 × VIN | 6 |
| Enable Input Voltage Low | VEN | 0.5 | V | VIL (MAX) | 7 | ||
| Enable Input Voltage High | VEN | 1.5 | V | VIH (MIN) | 7 | ||
| Enable Input Current | IEN | 1 | 5 | µA | 0V ≤ VEN ≤ 5V | 7 | |
| Undervoltage Lock-Out Threshold, rising | UVLO_TH | 2 | 2.25 | 2.5 | V | VIN Rising | 7 |
| Undervoltage Lock-Out Threshold, falling | UVLO_TH | 1.9 | 2.15 | 2.4 | V | VIN Falling | 7 |
| Fault Status Output Voltage | VFAULT | 0.25 | 0.4 | V | IOL = 10 mA | 7 | |
| Output Turn-On Rise Time | tRISE | 500 | 1000 | 1500 | µs | RL = 10Ω, CLOAD = 1 µF, VOUT = 10% to 90%, CSLEW = Open | 7 |
| Delay before asserting or releasing FAULT/ | tD_FAULT | 20 | 32 | 49 | ms | Time from current limiting to FAULT/ state change | 7 |
| Output Turn-On Delay | tON_DLY | 1000 | 1500 | µs | RL = 43Ω, CL = 120 µF, VEN = 50% to VOUT = 10%, CSLEW = Open | 7 | |
| Output Turn-Off Delay | tOFF_DLY | 700 | µs | RL = 43Ω, CL = 120 µF, VEN = 50% to VOUT = 90%, CSLEW = Open | 7 | ||
| Supply Voltage (operating) | 2.5 | 5.5 | V | Operating Ratings | 5 | ||
| Continuous Output Current (operating) | 0 | 2.1 | A | All except MIC2005A / MIC20X9A | 5 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 8 | ||
| VIN, VOUT | -0.3 | 6 | V | 5 | |||
| All Other Pins | -0.3 | 5.5 | V | 5 | |||
| ESD HBM, VOUT and GND | -4 | 4 | kV | Human body model, 1.5k in series with 100pF | 5 | ||
| ESD HBM, all other pins | -2 | 2 | kV | Human body model, 1.5k in series with 100pF | 5 | ||
| ESD MM, all pins | -200 | 200 | V | 5 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 8 | |||
| Storage Temperature | TS | -65 | 150 | °C | 8 | ||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 8 | |||
| Undervoltage Lock-Out Hysteresis | UVLO_HYS | 0.1 | V | 7 | |||
| Overtemperature Threshold, increasing | OT_TH | 145 | °C | TJ Increasing | 7 | ||
| Overtemperature Threshold, decreasing | OT_TH | 135 | °C | TJ Decreasing | 7 | ||
| Thermal Resistance, SOT-23-5/6 | JA | 230 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
MIC2005-0.8LYM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic2005-0-8lym5-tr-etched.step/mic2005-0-8lym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2005-0-8lym5-tr.step/mic2005-0-8lym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (37 pp, sha256
55131cf94358e326, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC2005-0.8LYM5-TR
**Microchip Tech** · Pre-ordered MCUs · SOT-23-5
MIC2005-0.8LYM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input that powers both the output switch and the internal control circuitry (operating range 2.5V to 5.5V, UVLO rising threshold 2V min / 2.25V typ / 2.5V max). |
| 2 | GND | power_in | Ground. |
| 3 | ENABLE | input | Switch enable input; logic low accepted at VIL max 0.5V and logic high at VIH min 1.5V, with the MIC2005L variant listed as active-low enable. |
| 4 | FAULT/ | output | Open-drain fault status output that goes low when the switch is current limiting or shut down by thermal protection, allowing logical OR'ing of multiple switches. |
| 5 | VOUT | power_out | Switch output to which the load is connected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Switch Input Voltage | VIN | 2.5 | | 5.5 | V | | 5 |
| Output Leakage Current | ILEAK | | 12 | 100 | µA | Switch = OFF, VOUT = 0V | 5 |
| Supply Current, switch ON | IIN | | 80 | 330 | µA | Switch = ON | 6 |
| Supply Current, switch OFF (active-low enable, VEN = 1.5V) | IIN | | 8 | 15 | µA | Switch = OFF, Active-Low Enable, VEN = 1.5V | 6 |
| Supply Current, switch OFF (active-high enable, VEN = 0V) | IIN | | 1 | 5 | µA | Switch = OFF, Active-High Enable, VEN = 0V | 6 |
| Power Switch Resistance | RDS(ON) | | 70 | 100 | mΩ | VIN = 5V, IOUT = 100 mA | 6 |
| Power Switch Resistance (full temperature) | RDS(ON) | | | 125 | mΩ | VIN = 5V, IOUT = 100 mA | 6 |
| Fixed Current Limit (0.8 option) | ILIMIT | 0.8 | 1.1 | 1.5 | A | -0.8, VOUT = 0.8 × VIN | 6 |
| Enable Input Voltage Low | VEN | | | 0.5 | V | VIL (MAX) | 7 |
| Enable Input Voltage High | VEN | 1.5 | | | V | VIH (MIN) | 7 |
| Enable Input Current | IEN | | 1 | 5 | µA | 0V ≤ VEN ≤ 5V | 7 |
| Undervoltage Lock-Out Threshold, rising | UVLO_TH | 2 | 2.25 | 2.5 | V | VIN Rising | 7 |
| Undervoltage Lock-Out Threshold, falling | UVLO_TH | 1.9 | 2.15 | 2.4 | V | VIN Falling | 7 |
| Fault Status Output Voltage | VFAULT | | 0.25 | 0.4 | V | IOL = 10 mA | 7 |
| Output Turn-On Rise Time | tRISE | 500 | 1000 | 1500 | µs | RL = 10Ω, CLOAD = 1 µF, VOUT = 10% to 90%, CSLEW = Open | 7 |
| Delay before asserting or releasing FAULT/ | tD_FAULT | 20 | 32 | 49 | ms | Time from current limiting to FAULT/ state change | 7 |
| Output Turn-On Delay | tON_DLY | | 1000 | 1500 | µs | RL = 43Ω, CL = 120 µF, VEN = 50% to VOUT = 10%, CSLEW = Open | 7 |
| Output Turn-Off Delay | tOFF_DLY | | | 700 | µs | RL = 43Ω, CL = 120 µF, VEN = 50% to VOUT = 90%, CSLEW = Open | 7 |
| Supply Voltage (operating) | | 2.5 | | 5.5 | V | Operating Ratings | 5 |
| Continuous Output Current (operating) | | 0 | | 2.1 | A | All except MIC2005A / MIC20X9A | 5 |
| Ambient Temperature Range | TA | -40 | | 85 | °C | | 8 |
| VIN, VOUT | | -0.3 | | 6 | V | | 5 |
| All Other Pins | | -0.3 | | 5.5 | V | | 5 |
| ESD HBM, VOUT and GND | | -4 | | 4 | kV | Human body model, 1.5k in series with 100pF | 5 |
| ESD HBM, all other pins | | -2 | | 2 | kV | Human body model, 1.5k in series with 100pF | 5 |
| ESD MM, all pins | | -200 | | 200 | V | | 5 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 8 |
| Storage Temperature | TS | -65 | | 150 | °C | | 8 |
| Lead Temperature | | | | 260 | °C | Soldering, 10 sec. | 8 |
| Undervoltage Lock-Out Hysteresis | UVLO_HYS | | 0.1 | | V | | 7 |
| Overtemperature Threshold, increasing | OT_TH | | 145 | | °C | TJ Increasing | 7 |
| Overtemperature Threshold, decreasing | OT_TH | | 135 | | °C | TJ Decreasing | 7 |
| Thermal Resistance, SOT-23-5/6 | JA | | 230 | | °C/W | | 8 |
## CAD (KiCad official)
- Symbol: `MIC2005-0.8LYM5-TR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mic2005-0-8lym5-tr-etched.step` / `mic2005-0-8lym5-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic2005-0-8lym5-tr.step` / `mic2005-0-8lym5-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic2005-0-8lym5-tr-datasheet.pdf) (37 pp, sha256 `55131cf94358e326`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic2005-0-8lym5-tr-datasheet.pdf)