main
Ray
Publish 0.1.0
beed750
MH254EST
MST(Magnesensor Tech (MST)) · Magnetic Sensors · TSOT-23-3L
MH254EST from MST(Magnesensor Tech (MST)), in a TSOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin, operating range 1.65 V to 6 V (absolute maximum 7 V); no reverse VDD protection, a 100 Ω series resistor is recommended. |
| 2 | OUT | output | Totem-pole output that goes low when B > BOP and high when B < BRP, rated for 0.5 mA source/sink at VOH/VOL levels and 1 mA absolute maximum output current. |
| 3 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MST(Magnesensor Tech (MST)) |
| Package | TSOT-23-3L |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.65 | 6 | V | Operating | 3 | |
| Supply Current Awake State | IDD | 1.4 | 3 | mA | Awake State, Ta=25℃, VDD=1.8V | 3 | |
| Supply Current Sleep State | IDD | 3.6 | 7 | μA | Sleep State, Ta=25℃, VDD=1.8V | 3 | |
| Supply Current Average | IDD | 5 | 10 | μA | Average, Ta=25℃, VDD=1.8V | 3 | |
| Output Leakage Current | Ioff | 1 | uA | Output off | 3 | ||
| Output Low Voltage | VOL | 0.2 | V | IOUT=0.5mA(Sink) | 3 | ||
| Awake mode time | Taw | 40 | 80 | uS | Operating | 3 | |
| Sleep mode time | TSL | 40 | 80 | mS | Operating | 3 | |
| Electro-Static Discharge HBM | 4 | KV | HBM | 3 | |||
| Operating Point | BOP | 30 | 50 | Gauss | N pole to branded side, B > BOP, Oout On | 3 | |
| Release Point | BRP | 10 | 20 | Gauss | N pole to branded side, B < BRP, Vout Off | 3 | |
| Hysteresis | BHYS | 10 | Gauss | /BOPx - BRPx/ | 3 | ||
| Duty Cycle | D,C | 0.1 | % | Operating | 3 | ||
| Supply voltage | VDD | 7 | V | Ta=25℃ | 3 | ||
| Output Voltage | Vout | 7 | V | Ta=25℃ | 3 | ||
| Reverse Voltage | VDD, VOUT | -0.3 | V | Ta=25℃ | 3 | ||
| Output current | IOUT | 1 | mA | Ta=25℃ | 3 | ||
| Operating temperature range | Ta | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Ts | -65 | 150 | ℃ | 3 | ||
| Maximum Junction Temp | Tj | 150 | ℃ | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | UA:TO-92S,VK:TO-92S(4pin),VF:TO-92S(5pin),SO:SOT-23, SQ:QFN-3,ST:TSOT-23,SN:SOT-553,SF:SOT-89(5pin) | 2 |
CAD (KiCad official)
- Symbol:
MH254EST - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: TSOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
mh254est-etched.step/mh254est-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mh254est.step/mh254est.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MST(Magnesensor Tech (MST)) datasheet (4 pp, sha256
59e68c4a63811c06, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MH254EST
**MST(Magnesensor Tech (MST))** · Magnetic Sensors · TSOT-23-3L
MH254EST from MST(Magnesensor Tech (MST)), in a TSOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin, operating range 1.65 V to 6 V (absolute maximum 7 V); no reverse VDD protection, a 100 Ω series resistor is recommended. |
| 2 | OUT | output | Totem-pole output that goes low when B > BOP and high when B < BRP, rated for 0.5 mA source/sink at VOH/VOL levels and 1 mA absolute maximum output current. |
| 3 | GND | power_in | Ground reference pin for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MST(Magnesensor Tech (MST)) |
| Package | TSOT-23-3L |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.65 | | 6 | V | Operating | 3 |
| Supply Current Awake State | IDD | | 1.4 | 3 | mA | Awake State, Ta=25℃, VDD=1.8V | 3 |
| Supply Current Sleep State | IDD | | 3.6 | 7 | μA | Sleep State, Ta=25℃, VDD=1.8V | 3 |
| Supply Current Average | IDD | | 5 | 10 | μA | Average, Ta=25℃, VDD=1.8V | 3 |
| Output Leakage Current | Ioff | | | 1 | uA | Output off | 3 |
| Output Low Voltage | VOL | | | 0.2 | V | IOUT=0.5mA(Sink) | 3 |
| Awake mode time | Taw | | 40 | 80 | uS | Operating | 3 |
| Sleep mode time | TSL | | 40 | 80 | mS | Operating | 3 |
| Electro-Static Discharge HBM | | 4 | | | KV | HBM | 3 |
| Operating Point | BOP | | 30 | 50 | Gauss | N pole to branded side, B > BOP, Oout On | 3 |
| Release Point | BRP | | 10 | 20 | Gauss | N pole to branded side, B < BRP, Vout Off | 3 |
| Hysteresis | BHYS | | 10 | | Gauss | /BOPx - BRPx/ | 3 |
| Duty Cycle | D,C | | 0.1 | | % | Operating | 3 |
| Supply voltage | VDD | | | 7 | V | Ta=25℃ | 3 |
| Output Voltage | Vout | | | 7 | V | Ta=25℃ | 3 |
| Reverse Voltage | VDD, VOUT | -0.3 | | | V | Ta=25℃ | 3 |
| Output current | IOUT | | | 1 | mA | Ta=25℃ | 3 |
| Operating temperature range | Ta | -40 | | 85 | ℃ | | 3 |
| Storage temperature range | Ts | -65 | | 150 | ℃ | | 3 |
| Maximum Junction Temp | Tj | | | 150 | ℃ | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | UA:TO-92S,VK:TO-92S(4pin),VF:TO-92S(5pin),SO:SOT-23, SQ:QFN-3,ST:TSOT-23,SN:SOT-553,SF:SOT-89(5pin) | 2 |
## CAD (KiCad official)
- Symbol: `MH254EST`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: TSOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `mh254est-etched.step` / `mh254est-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mh254est.step` / `mh254est.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MST(Magnesensor Tech (MST)) datasheet](docs/mh254est-datasheet.pdf) (4 pp, sha256 `59e68c4a63811c06`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mh254est-datasheet.pdf)