main
Ray
Publish 0.1.0
30555ed
MGJ2D122005SC
Murata Power Solutions Inc. · Isolated Power Modules · SIP, 19.5x9.8mm
MGJ2D122005SC from Murata Power Solutions Inc., in a SIP, 19.5x9.8mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VIN | power_in | Positive input supply for the 12V input type, with continuous operation from 10.8 V to 13.2 V and an absolute maximum input of 13.2 V. |
| 2 | -VIN | power_in | Negative input connection for the 12V input supply, as printed in the pin function table. |
| 5 | -VOUT | power_out | Negative output for this MGJ2D122005SC variant, which provides -5 V per the selection guide. |
| 6 | OV | power_in | Output common (0 V) pin shared between the +VOUT and -VOUT outputs, with no further limits stated in the datasheet. |
| 7 | +VOUT | power_out | Positive output for this MGJ2D122005SC variant, which provides +20 V per the selection guide. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Power Solutions Inc. |
| Package | SIP, 19.5x9.8mm |
| Category | Power Modules |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (12V input types) | VIN | 10.8 | 12 | 13.2 | V | Continuous operation, 12V input types | 1 |
| Efficiency | 78 | 82 | % | 1 | |||
| Load regulation | 5.5 | 8 | % | 1 | |||
| Ripple & noise | 30 | 45 | mVp-p | See ripple & noise test method | 1 | ||
| Line regulation | 1 | 1.2 | %/% | High VIN to low VIN | 2 | ||
| Operating ambient temperature | TA | -40 | 100 | °C | Specification, all output types (see safety approval section for limitations) | 2 | |
| Storage temperature | TSTORE | -55 | 125 | °C | Storage | 2 | |
| Input voltage | VIN | 13.2 | V | MGJ2D12xxxxSC | 2 | ||
| Lead temperature | 260 | °C | 1mm from case for 10 seconds | 2 | |||
| Isolation test voltage (production) | 5200 | VDC | Production tested for 1 second | 2 | |||
| Isolation test voltage (qualification) | 5200 | VDC | Qualification tested for 1 minute | 2 | |||
| Continuous barrier withstand voltage | 2400 | VDC | Non-safety barrier application | 2 | |||
| Reinforced insulation working voltage (UL62368-1) | 150 | Vrms | UL62368-1 reinforced | 2 | |||
| Basic insulation working voltage (UL62368-1) | 300 | Vrms | UL62368-1 basic | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | notes for further information. The pin termination finish on this product series is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The series is backward compatible with Sn/Pb soldering sy | 3 |
CAD (Adom-generated)
- Symbol:
MGJ2D122005SC - Footprint:
Adom_Gen:Murata_Power_Solutions_Inc._MGJ2_22d936 - 3D model: generated to fit the land (STEP)
- 3D model files:
mgj2d122005sc-etched.step/mgj2d122005sc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mgj2d122005sc.step/mgj2d122005sc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Power Solutions Inc. datasheet (14 pp, sha256
8821a1d59820a958, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# MGJ2D122005SC
**Murata Power Solutions Inc.** · Isolated Power Modules · SIP, 19.5x9.8mm
MGJ2D122005SC from Murata Power Solutions Inc., in a SIP, 19.5x9.8mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VIN | power_in | Positive input supply for the 12V input type, with continuous operation from 10.8 V to 13.2 V and an absolute maximum input of 13.2 V. |
| 2 | -VIN | power_in | Negative input connection for the 12V input supply, as printed in the pin function table. |
| 5 | -VOUT | power_out | Negative output for this MGJ2D122005SC variant, which provides -5 V per the selection guide. |
| 6 | OV | power_in | Output common (0 V) pin shared between the +VOUT and -VOUT outputs, with no further limits stated in the datasheet. |
| 7 | +VOUT | power_out | Positive output for this MGJ2D122005SC variant, which provides +20 V per the selection guide. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Power Solutions Inc. |
| Package | SIP, 19.5x9.8mm |
| Category | Power Modules |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (12V input types) | VIN | 10.8 | 12 | 13.2 | V | Continuous operation, 12V input types | 1 |
| Efficiency | | 78 | 82 | | % | | 1 |
| Load regulation | | | 5.5 | 8 | % | | 1 |
| Ripple & noise | | | 30 | 45 | mVp-p | See ripple & noise test method | 1 |
| Line regulation | | | 1 | 1.2 | %/% | High VIN to low VIN | 2 |
| Operating ambient temperature | TA | -40 | | 100 | °C | Specification, all output types (see safety approval section for limitations) | 2 |
| Storage temperature | TSTORE | -55 | | 125 | °C | Storage | 2 |
| Input voltage | VIN | | | 13.2 | V | MGJ2D12xxxxSC | 2 |
| Lead temperature | | | | 260 | °C | 1mm from case for 10 seconds | 2 |
| Isolation test voltage (production) | | | | 5200 | VDC | Production tested for 1 second | 2 |
| Isolation test voltage (qualification) | | | | 5200 | VDC | Qualification tested for 1 minute | 2 |
| Continuous barrier withstand voltage | | | | 2400 | VDC | Non-safety barrier application | 2 |
| Reinforced insulation working voltage (UL62368-1) | | | | 150 | Vrms | UL62368-1 reinforced | 2 |
| Basic insulation working voltage (UL62368-1) | | | | 300 | Vrms | UL62368-1 basic | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | notes for further information. The pin termination finish on this product series is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The series is backward compatible with Sn/Pb soldering sy | 3 |
## CAD (Adom-generated)
- Symbol: `MGJ2D122005SC`
- Footprint: `Adom_Gen:Murata_Power_Solutions_Inc._MGJ2_22d936`
- 3D model: generated to fit the land (STEP)
- 3D model files: `mgj2d122005sc-etched.step` / `mgj2d122005sc-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mgj2d122005sc.step` / `mgj2d122005sc.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Power Solutions Inc. datasheet](https://pim.murata.com/asset/pim4/isolatedGateDrivePower/KDC_MGJ2_PDF_ISOLATEDGATEDRIVEPOWER?lastModifiedDatetime=20250826174324) (14 pp, sha256 `8821a1d59820a958`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/mgj2d122005sc-datasheet.pdf)