component
MG6226D4-18
Public Made by Adomby adom
Megain Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-4L(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| mg6226d4-18-etched.glb | 17d ago |
| mg6226d4-18-etched.step | 17d ago |
| mg6226d4-18-hero.glb | 17d ago |
| mg6226d4-18-hero.overlay.json | 17d ago |
| mg6226d4-18.glb | 17d ago |
| mg6226d4-18.kicad_mod | 17d ago |
| mg6226d4-18.kicad_sym | 17d ago |
| mg6226d4-18.lbr | 17d ago |
| mg6226d4-18.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
MG6226D4-18
Megain · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4L(1x1)
MG6226D4-18 from Megain, in a DFN-4L(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin, rated up to 300 mA, with output accuracy of ±2% over temperature. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin; the datasheet lists VENHI as 0.6 V and VENLO as 0.2 V. |
| 4 | VIN | power_in | Input voltage pin; recommended input range is 2.5 V to 5.5 V, with an absolute maximum of -0.3 V to +6.5 V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Megain |
| Package | DFN-4L(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT | -2 | 2 | % | 3 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 6.5 | V | 3 | ||
| Junction temperature (absolute maximum) | TJ | 150 | ℃ | 3 | |||
| Power dissipation | PD | 0.4 | W | DFN1X1 package | 3 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| Soldering temperature | 300 | ℃ | 焊接时间≤10S | 3 | |||
| Thermal resistance, junction to ambient | RθJA | 250 | ⁰C/W | 3 | |||
| Input voltage (recommended operating) | VIN | 2.5 | 5.5 | V | 3 | ||
| Operating temperature | TA | -40 | 85 | ℃ | 3 | ||
| Junction temperature range (recommended operating) | TJ | -40 | 125 | ℃ | 3 | ||
| Line regulation | △VLINE | 20 | 50 | mV | VIN = VOUT + 1V ~5.5V | 3 | |
| Load regulation | △VLOAD | 1.5 | % | IOUT = 1mA ~300mA | 3 | ||
| Dropout voltage | VDROP | 180 | mV | IOUT = 100mA, VOUT =1.8V | 3 | ||
| Dropout voltage | VDROP | 600 | mV | IOUT = 300mA, VOUT =1.8V | 3 | ||
| Quiescent current | IQ | 0.5 | 1 | uA | 4 | ||
| Current limit | ICL | 360 | 560 | mA | 4 | ||
| Enable high level | VENHI | 0.6 | V | 4 | |||
| Enable low level | VENLO | 0.2 | V | 4 | |||
| Ripple rejection (PSRR) | PSRR | 45 | dB | f=1KHz | 4 | ||
| Thermal shutdown | TSD | 150 | ℃ | 4 | |||
| Thermal shutdown hysteresis | TSDHY | 20 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
MG6226D4-18 - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4L(1x1) (KiCad packages3D, STEP)
- 3D model files:
mg6226d4-18-etched.step/mg6226d4-18-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mg6226d4-18.step/mg6226d4-18.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Megain datasheet (9 pp, sha256
9adf0b2149c90b01, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).