main
Ray
Publish 0.1.0
309fd7a
MFS2633AMDAHAD
NXP Semicon · IC · LQFP-48-EP(7x7)
MFS2633AMDAHAD from NXP Semicon, in a LQFP-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBST_PG | output | Power good signal for boost controller. |
| 2 | WAKE2 | input | WAKE2 input pin or ERROR monitoring input. |
| 3 | GPIO1 | bidirectional | General purpose I/O 1. |
| 4 | TRK1 | output | TRK1 output. |
| 5 | TRK2 | output | TRK2 output. |
| 6 | GPIO2 | bidirectional | General purpose I/O 2. |
| 7 | TRKIN | input | Tracker input. |
| 8 | VREF | power_in | Voltage reference output. |
| 9 | LDO2OUT | output | LDO2 output. |
| 10 | LDOIN | input | LDO input voltage supply. |
| 11 | LDO1OUT | output | LDO1 output. |
| 12 | FS1B | output | Safety output #1. |
| 13 | FS0B | output | Safety output #0. |
| 14 | VMONEXT | input | External voltage monitoring input. |
| 15 | VMONCORE | input | VCORE voltage monitoring input. |
| 16 | RSTB | bidirectional | Reset input/output. |
| 17 | FCCU1 | input | Fault control collection unit 1. |
| 18 | FCCU2 | input | Fault control collection unit 2. |
| 19 | GNDFS | power_in | GND for fail-safe circuitry. |
| 20 | GND | power_in | GND for main circuitry. |
| 21 | VDIG | power_out | 1.6 V digital supply. |
| 22 | GNDSUB | power_in | Substrate ground. |
| 23 | VDDIO | power_in | I/O input supply. |
| 24 | INTB | output | Interrupt output. |
| 25 | MISO | output | SPI primary in secondary out. |
| 26 | MOSI | input | SPI primary out secondary input. |
| 27 | SCLK | input | SPI clock input. |
| 28 | CSB | input | SPI chip select. |
| 29 | AMUX | output | Analog multiplexer output. |
| 30 | CORE_FB | input | VCORE feedback node. |
| 31 | DEBUG | input | DEBUG input pin. |
| 32 | CORE_SW | output | VCORE switching node. |
| 33 | CORE_BT | input | VCORE bootstrap supply. |
| 34 | CORE_IN | input | VCORE input supply. |
| 35 | VBOS | output | Best of supply decoupling output. |
| 36 | VMONPRE | input | VPRE monitoring pin. |
| 37 | VPRE_FB | input | VPRE feedback node. |
| 38 | NC | unconnected | Not connected pin. |
| 39 | VPRE_BT | output | VPRE boot strap capacitor. |
| 40 | VPRE_SW | output | VPRE switching node. |
| 41 | VSUP_PWR | input | VPRE converter supply pin. |
| 42 | VSUP | power_in | Supply pin for internal biasing. |
| 43 | VBST_FB | input | VBST feedback node. |
| 44 | VBST_ISL | input | VBST current sense low. |
| 45 | VBST_G | output | VBST low-side gate drive. |
| 46 | VBST_ISH | input | VBST current sense high. |
| 47 | WAKE1 | input | WAKE1 input pin. |
| 48 | BATSENSE | input | Battery sense terminal. |
| 49 | EP | power_in | Exposed pad (to be connected to GND). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-48-EP(7x7) |
| Category | |
| Pins | 49 |
CAD (KiCad official)
- Symbol:
MFS2633AMDAHAD - Footprint:
Package_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm - 3D model: LQFP-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
mfs2633amdahad-etched.step/mfs2633amdahad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mfs2633amdahad.step/mfs2633amdahad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (32 pp, sha256
c8980ea5e004bf7d, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MFS2633AMDAHAD
**NXP Semicon** · IC · LQFP-48-EP(7x7)
MFS2633AMDAHAD from NXP Semicon, in a LQFP-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBST_PG | output | Power good signal for boost controller. |
| 2 | WAKE2 | input | WAKE2 input pin or ERROR monitoring input. |
| 3 | GPIO1 | bidirectional | General purpose I/O 1. |
| 4 | TRK1 | output | TRK1 output. |
| 5 | TRK2 | output | TRK2 output. |
| 6 | GPIO2 | bidirectional | General purpose I/O 2. |
| 7 | TRKIN | input | Tracker input. |
| 8 | VREF | power_in | Voltage reference output. |
| 9 | LDO2OUT | output | LDO2 output. |
| 10 | LDOIN | input | LDO input voltage supply. |
| 11 | LDO1OUT | output | LDO1 output. |
| 12 | FS1B | output | Safety output #1. |
| 13 | FS0B | output | Safety output #0. |
| 14 | VMONEXT | input | External voltage monitoring input. |
| 15 | VMONCORE | input | VCORE voltage monitoring input. |
| 16 | RSTB | bidirectional | Reset input/output. |
| 17 | FCCU1 | input | Fault control collection unit 1. |
| 18 | FCCU2 | input | Fault control collection unit 2. |
| 19 | GNDFS | power_in | GND for fail-safe circuitry. |
| 20 | GND | power_in | GND for main circuitry. |
| 21 | VDIG | power_out | 1.6 V digital supply. |
| 22 | GNDSUB | power_in | Substrate ground. |
| 23 | VDDIO | power_in | I/O input supply. |
| 24 | INTB | output | Interrupt output. |
| 25 | MISO | output | SPI primary in secondary out. |
| 26 | MOSI | input | SPI primary out secondary input. |
| 27 | SCLK | input | SPI clock input. |
| 28 | CSB | input | SPI chip select. |
| 29 | AMUX | output | Analog multiplexer output. |
| 30 | CORE_FB | input | VCORE feedback node. |
| 31 | DEBUG | input | DEBUG input pin. |
| 32 | CORE_SW | output | VCORE switching node. |
| 33 | CORE_BT | input | VCORE bootstrap supply. |
| 34 | CORE_IN | input | VCORE input supply. |
| 35 | VBOS | output | Best of supply decoupling output. |
| 36 | VMONPRE | input | VPRE monitoring pin. |
| 37 | VPRE_FB | input | VPRE feedback node. |
| 38 | NC | unconnected | Not connected pin. |
| 39 | VPRE_BT | output | VPRE boot strap capacitor. |
| 40 | VPRE_SW | output | VPRE switching node. |
| 41 | VSUP_PWR | input | VPRE converter supply pin. |
| 42 | VSUP | power_in | Supply pin for internal biasing. |
| 43 | VBST_FB | input | VBST feedback node. |
| 44 | VBST_ISL | input | VBST current sense low. |
| 45 | VBST_G | output | VBST low-side gate drive. |
| 46 | VBST_ISH | input | VBST current sense high. |
| 47 | WAKE1 | input | WAKE1 input pin. |
| 48 | BATSENSE | input | Battery sense terminal. |
| 49 | EP | power_in | Exposed pad (to be connected to GND). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-48-EP(7x7) |
| Category | |
| Pins | 49 |
## CAD (KiCad official)
- Symbol: `MFS2633AMDAHAD`
- Footprint: `Package_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm`
- 3D model: LQFP-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files: `mfs2633amdahad-etched.step` / `mfs2633amdahad-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mfs2633amdahad.step` / `mfs2633amdahad.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/MFS2633AMDAHAD.pdf) (32 pp, sha256 `c8980ea5e004bf7d`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mfs2633amdahad-datasheet.pdf)