main
Ray Publish 0.1.0 ea8de69

MFS2613AMDH3AD

NXP Semicon · IC · LQFP-48-EP(7x7)

MFS2613AMDH3AD from NXP Semicon, in a LQFP-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBST_PG output Power good signal for boost controller; DC voltage limited to -0.3 V to 40 V.
2 WAKE2 input WAKE2 input pin or ERROR monitoring input; DC voltage limited to -0.3 V to 40 V.
3 GPIO1 bidirectional General purpose I/O 1; DC voltage limited to -0.3 V to 40 V with maximum reverse current of -5 mA.
4 TRK1 output TRK1 output; DC voltage limited to -1.2 V to 40 V.
5 TRK2 output TRK2 output; DC voltage limited to -1.2 V to 40 V.
6 GPIO2 bidirectional General purpose I/O 2; DC voltage limited to -0.3 V to 40 V with maximum reverse current of -5 mA.
7 TRKIN input Tracker input; DC voltage limited to -0.3 V to 8.5 V.
8 VREF power_in Voltage reference output; DC voltage limited to -0.3 V to 5.5 V.
9 LDO2OUT power_out LDO2 output; DC voltage limited to -0.3 V to 5.5 V.
10 LDOIN power_in LDO input voltage supply; DC voltage limited to -0.3 V to 8.5 V.
11 LDO1OUT power_out LDO1 output; DC voltage limited to -0.3 V to 5.5 V.
12 FS1B output Safety output #1; DC voltage limited to -0.3 V to 40 V.
13 FS0B output Safety output #0; DC voltage limited to -0.3 V to 40 V.
14 VMONEXT input External voltage monitoring input; DC voltage limited to -0.3 V to 40 V.
15 VMONCORE input VCORE voltage monitoring input; DC voltage limited to -0.3 V to 40 V.
16 RSTB bidirectional Reset input/output; DC voltage limited to -0.3 V to 5.5 V.
17 FCCU1 input Fault control collection unit 1 digital input; DC voltage limited to -0.3 V to 5.5 V.
18 FCCU2 input Fault control collection unit 2 digital input; DC voltage limited to -0.3 V to 5.5 V.
19 GNDFS power_in GND connection for fail-safe circuitry; DC voltage limited to -0.3 V to 0.3 V.
20 GND power_in GND connection for main circuitry; DC voltage limited to -0.3 V to 0.3 V.
21 VDIG power_out 1.6 V digital supply output; DC voltage limited to -0.3 V to 2 V.
22 GNDSUB power_in Substrate ground connection; DC voltage limited to -0.3 V to 0.3 V.
23 VDDIO power_in I/O input supply; DC voltage limited to -0.3 V to 5.5 V.
24 INTB output Interrupt output; DC voltage limited to -0.3 V to 5.5 V.
25 MISO output SPI primary in secondary out; DC voltage limited to -0.3 V to 5.5 V.
26 MOSI input SPI primary out secondary input; DC voltage limited to -0.3 V to 5.5 V.
27 SCLK input SPI clock input; DC voltage limited to -0.3 V to 5.5 V.
28 CSB input SPI chip select input; DC voltage limited to -0.3 V to 5.5 V.
29 AMUX output Analog multiplexer output; DC voltage limited to -0.3 V to 5.5 V.
30 CORE_FB input VCORE feedback node; DC voltage limited to -0.3 V to 5.5 V.
31 DEBUG input DEBUG input pin; DC voltage limited to -0.3 V to 10 V.
32 CORE_SW output VCORE switching node; DC voltage limited to -0.3 V to 8.5 V.
33 CORE_BT input VCORE bootstrap supply; DC voltage limited to -0.3 V to 12.5 V.
34 CORE_IN power_in VCORE input supply; DC voltage limited to -0.3 V to 8.5 V.
35 VBOS power_out Best of supply decoupling output; DC voltage limited to -0.3 V to 5.6 V.
36 VMONPRE input VPRE monitoring pin; DC voltage limited to -0.3 V to 40 V.
37 VPRE_FB input VPRE feedback node; DC voltage limited to -0.3 V to 8.5 V.
38 NC unconnected Not connected pin.
39 VPRE_BT output VPRE boot strap capacitor connection; DC voltage limited to -0.3 V to 45.5 V.
40 VPRE_SW output VPRE switching node; DC voltage limited to -0.3 V to 40 V.
41 VSUP_PWR power_in VPRE converter supply pin; DC voltage limited to -1.2 V to 40 V.
42 VSUP power_in Supply pin for internal biasing; DC voltage limited to -1.2 V to 40 V.
43 VBST_FB input VBST feedback node; DC voltage limited to -0.3 V to 40 V.
44 VBST_ISL input VBST current sense low; DC voltage limited to -0.3 V to 5.5 V.
45 VBST_G output VBST low-side gate drive; DC voltage limited to -0.3 V to 5.5 V.
46 VBST_ISH input VBST current sense high; DC voltage limited to -0.3 V to 5.5 V.
47 WAKE1 input WAKE1 input pin; DC voltage limited to -0.3 V to 40 V.
48 BATSENSE input Battery sense terminal; DC voltage limited to -18.0 V to 40 V with maximum reverse current of -10 mA.
49 EP power_in Exposed pad to be connected to GND; DC voltage limited to -0.3 V to 0.3 V.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-48-EP(7x7)
Category
Pins 49

CAD (KiCad official)

  • Symbol: MFS2613AMDH3AD
  • Footprint: Package_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm
  • 3D model: LQFP-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: mfs2613amdh3ad-etched.step / mfs2613amdh3ad-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mfs2613amdh3ad.step / mfs2613amdh3ad.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (32 pp, sha256 c8980ea5e004bf7d, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF