component
MFJ06KR005FT
Public Made by Adomby adom
FH (Guangdong Fenghua Advanced Tech) Current Sense Resistors / Shunt Resistors, 1206. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMFJ06KR005FT
FH (Guangdong Fenghua Advanced Tech) · Current Sense Resistors / Shunt Resistors · 1206
MFJ06KR005FT from FH (Guangdong Fenghua Advanced Tech), in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FH (Guangdong Fenghua Advanced Tech) |
| Package | 1206 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance | -1 | 1 | % | Tolerance code F = ±1% (page 1) | 1 | ||
| Temperature coefficient of resistance | TCR | -100 | 100 | ppm/°C | TCR code K = ±100 ppm/°C (page 1); per-range table on page 3 not fully legible | 1 | |
| Operating temperature range | -55 | 170 | °C | Operating temperature range, printed as -55 ~170 °C | 2 | ||
| Insulation resistance | 1000 | MΩ | DC 100V ±15V between substrate and terminations, 1 min | 4 | |||
| Solderability (solder coverage of solderable area) | 95 | % | Lead-free solder bath at 245±5°C for 3 s ±0.3 s | 3 | |||
| Resistance change after rapid temperature change | △R | -1 | 1 | %R | -55°C (30 min) / normal temperature (5 min) / 125°C (30 min), 100 cycles | 3 | |
| Resistance change after short time overload | △R | -1 | 1 | %R | 1/5W~1W: 5x rated power for 5 s; 2W: 4x rated power for 5 s (MPN power code not decoded) | 3 | |
| Resistance change after resistance to soldering heat | △R | -1 | 1 | %R | Lead-free solder bath at 270±5°C for 10 s ±1 s | 3 | |
| Resistance change after substrate bending test | △R | -1 | 1 | %R | Bending distance 3 mm (0402-1206), duration 60 s ±5 s | 3 | |
| Resistance change after damp heat, steady state | △R | -1 | 1 | %R | 40±2°C, 93±3%RH, 1000 h, rated current or limiting element current whichever is lower, 1.5 h ON / 0.5 h OFF | 3 | |
| Resistance change after endurance at 70°C | △R | -1 | 1 | %R | 70±2°C, 1000 h, rated current or limiting element current whichever is lower, 1.5 h ON / 0.5 h OFF | 4 | |
| Resistance change after endurance at upper category temperature | △R | -1 | 1 | %R | 170±2°C, 1000 h | 4 | |
| Nominal resistance | R | 0.005 | Ω | Resistance value code R005 = 0.005 Ω (page 1) | 1 |
CAD (KiCad official)
- Symbol:
MFJ06KR005FT - Footprint:
Resistor_SMD:R_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
mfj06kr005ft-etched.step/mfj06kr005ft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mfj06kr005ft.step/mfj06kr005ft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FH (Guangdong Fenghua Advanced Tech) datasheet (17 pp, sha256
d74e470f30cf6902, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).