main
Ray
Publish 0.1.0
373a334
MEB358ASG
BL(Shanghai Belling) · Operational Amplifier · SOP-8
MEB358ASG from BL(Shanghai Belling), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A output terminal; output swing is stated as 0V to Vcc-1.5V. |
| 2 | -INA | input | Channel A inverting input. |
| 3 | +INA | input | Channel A non-inverting input; the input common-mode range includes the ground potential. |
| 4 | GND | power_in | Ground (0V) reference; the datasheet's electrical test conditions specify GND=0V. |
| 5 | +INB | input | Channel B non-inverting input; the input common-mode range includes the ground potential. |
| 6 | -INB | input | Channel B inverting input. |
| 7 | OUTB | output | Channel B output terminal; output swing is stated as 0V to Vcc-1.5V. |
| 8 | VCC | power_in | IC positive supply; single-supply range 3V to 36V (dual ±1.5V to ±18V), absolute maximum supply 40V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL(Shanghai Belling) |
| Package | SOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3 | 2 | 3 | mV | Vo=1.4V, Rs=0Ω, Vcc=5V~30V | 3 |
| Input bias current | IB | 20 | 150 | nA | IIN+ or IIN-, VCM=0V | 3 | |
| Input offset current | IOS | 5 | 30 | nA | IIN+ or IIN-, VCM=0V | 3 | |
| Input common-mode voltage range (max = Vcc-1.5 V, not numeric in datasheet) | VCM | 0 | V | VCC=30V | 3 | ||
| Supply current | Icc | 0.7 | 2 | mA | TA=-40~85℃, RL=∞, VCC=30V | 3 | |
| Supply current | Icc | 0.5 | 1.2 | mA | TA=-40~85℃, RL=∞, VCC=5V | 3 | |
| Open-loop voltage gain | AOL | 85 | 100 | dB | Vcc=15V, Vo=1V~11V, RL≥2kΩ | 3 | |
| Common-mode rejection ratio | CMRR | 60 | 80 | dB | DC, VCM=0V~(VCC-1.5)V | 3 | |
| Power supply rejection ratio | PSRR | 70 | 100 | dB | Vcc=5V~30V | 3 | |
| Output source current | ISOURCE | 20 | 40 | mA | VIN+=1V, VIN-=0V, Vcc=15V, Vo=2V | 3 | |
| Output sink current | ISINK | 10 | 15 | mA | VIN+=0V, VIN-=1V, Vcc=15V, Vo=2V | 3 | |
| Output sink current (low output) | ISINK | 12 | 50 | uA | VIN+=0V, VIN-=1V, Vcc=15V, Vo=0.2V | 3 | |
| Output short-circuit current to ground | Isc | 40 | 60 | mA | Vcc=15V | 3 | |
| Output voltage high | VOH | 26 | V | Vcc=30V, RL = 2kΩ | 3 | ||
| Output voltage high | VOH | 27 | 28 | V | Vcc=30V, RL = 10kΩ | 4 | |
| Output voltage low | VOL | 5 | 20 | mV | Vcc=5V, RL = 10kΩ | 4 | |
| Absolute maximum supply voltage | 3 | 40 | V | 3 | |||
| Absolute maximum input voltage range | -0.3 | 40 | V | 3 | |||
| Junction temperature | -40 | 150 | ℃ | 3 | |||
| Operating ambient temperature | -40 | 85 | ℃ | 3 | |||
| Storage temperature | -55 | 150 | ℃ | 3 | |||
| Soldering temperature | 260 | ℃ | 10S | 3 | |||
| Power dissipation SOP8 | 0.92 | W | 3 | ||||
| Package thermal resistance SOP8 | 136 | ℃/W | 3 | ||||
| Single supply voltage | 3 | 36 | V | Single supply, from features | 1 | ||
| Dual supply voltage (each rail) | 1.5 | 18 | V | Dual supply, ±1.5V~±18V, from features | 1 | ||
| Input offset voltage temperature coefficient | ΔVOS/ΔT | 7 | μV/℃ | TA=-40~85℃ | 3 | ||
| Channel separation | -120 | dB | f=1kHz~20kHz | 3 |
CAD (KiCad official)
- Symbol:
MEB358ASG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
meb358asg-etched.step/meb358asg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);meb358asg.step/meb358asg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL(Shanghai Belling) datasheet (8 pp, sha256
406652fa8925bb68, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MEB358ASG
**BL(Shanghai Belling)** · Operational Amplifier · SOP-8
MEB358ASG from BL(Shanghai Belling), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A output terminal; output swing is stated as 0V to Vcc-1.5V. |
| 2 | -INA | input | Channel A inverting input. |
| 3 | +INA | input | Channel A non-inverting input; the input common-mode range includes the ground potential. |
| 4 | GND | power_in | Ground (0V) reference; the datasheet's electrical test conditions specify GND=0V. |
| 5 | +INB | input | Channel B non-inverting input; the input common-mode range includes the ground potential. |
| 6 | -INB | input | Channel B inverting input. |
| 7 | OUTB | output | Channel B output terminal; output swing is stated as 0V to Vcc-1.5V. |
| 8 | VCC | power_in | IC positive supply; single-supply range 3V to 36V (dual ±1.5V to ±18V), absolute maximum supply 40V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL(Shanghai Belling) |
| Package | SOP-8 |
| Category | Amplifiers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3 | 2 | 3 | mV | Vo=1.4V, Rs=0Ω, Vcc=5V~30V | 3 |
| Input bias current | IB | | 20 | 150 | nA | IIN+ or IIN-, VCM=0V | 3 |
| Input offset current | IOS | | 5 | 30 | nA | IIN+ or IIN-, VCM=0V | 3 |
| Input common-mode voltage range (max = Vcc-1.5 V, not numeric in datasheet) | VCM | 0 | | | V | VCC=30V | 3 |
| Supply current | Icc | | 0.7 | 2 | mA | TA=-40~85℃, RL=∞, VCC=30V | 3 |
| Supply current | Icc | | 0.5 | 1.2 | mA | TA=-40~85℃, RL=∞, VCC=5V | 3 |
| Open-loop voltage gain | AOL | 85 | 100 | | dB | Vcc=15V, Vo=1V~11V, RL≥2kΩ | 3 |
| Common-mode rejection ratio | CMRR | 60 | 80 | | dB | DC, VCM=0V~(VCC-1.5)V | 3 |
| Power supply rejection ratio | PSRR | 70 | 100 | | dB | Vcc=5V~30V | 3 |
| Output source current | ISOURCE | 20 | 40 | | mA | VIN+=1V, VIN-=0V, Vcc=15V, Vo=2V | 3 |
| Output sink current | ISINK | 10 | 15 | | mA | VIN+=0V, VIN-=1V, Vcc=15V, Vo=2V | 3 |
| Output sink current (low output) | ISINK | | 12 | 50 | uA | VIN+=0V, VIN-=1V, Vcc=15V, Vo=0.2V | 3 |
| Output short-circuit current to ground | Isc | | 40 | 60 | mA | Vcc=15V | 3 |
| Output voltage high | VOH | 26 | | | V | Vcc=30V, RL = 2kΩ | 3 |
| Output voltage high | VOH | 27 | 28 | | V | Vcc=30V, RL = 10kΩ | 4 |
| Output voltage low | VOL | | 5 | 20 | mV | Vcc=5V, RL = 10kΩ | 4 |
| Absolute maximum supply voltage | | 3 | | 40 | V | | 3 |
| Absolute maximum input voltage range | | -0.3 | | 40 | V | | 3 |
| Junction temperature | | -40 | | 150 | ℃ | | 3 |
| Operating ambient temperature | | -40 | | 85 | ℃ | | 3 |
| Storage temperature | | -55 | | 150 | ℃ | | 3 |
| Soldering temperature | | | | 260 | ℃ | 10S | 3 |
| Power dissipation SOP8 | | | | 0.92 | W | | 3 |
| Package thermal resistance SOP8 | | | | 136 | ℃/W | | 3 |
| Single supply voltage | | 3 | | 36 | V | Single supply, from features | 1 |
| Dual supply voltage (each rail) | | 1.5 | | 18 | V | Dual supply, ±1.5V~±18V, from features | 1 |
| Input offset voltage temperature coefficient | ΔVOS/ΔT | | 7 | | μV/℃ | TA=-40~85℃ | 3 |
| Channel separation | | | -120 | | dB | f=1kHz~20kHz | 3 |
## CAD (KiCad official)
- Symbol: `MEB358ASG`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `meb358asg-etched.step` / `meb358asg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `meb358asg.step` / `meb358asg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [BL(Shanghai Belling) datasheet](docs/meb358asg-datasheet.pdf) (8 pp, sha256 `406652fa8925bb68`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/meb358asg-datasheet.pdf)