main
History Download
Ray me8213asg: laser-etched CAD + chip hero (factory 2.0.0 backfill) d740400

ME8213ASG

MICRONE · AC-DC Controllers and Regulators · SOP-8

ME8213ASG from MICRONE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Chip supply. Recommended operating range 9-60 V; UVLO_on ~15 V, UVLO_off ~8.5 V; OVP ~65 V. Absolute max 65 V. Typical operating current ~0.8 mA.
2 GND power_in Ground reference for the controller.
3 GATE output Gate driver output for the external power MOSFET. Clamped at ~15 V; rise time ~150 ns and fall time ~100 ns (1-12 V into 3 nF load).
4 CS input Primary-side current sense input. Cycle-by-cycle peak current limit compares against V_TH_OC (~0.55 V at FB=3.3 V) with a 300 ns leading-edge blanking window. Absolute max -0.3 to 7 V.
5 DDT input Valley/demag detection input from the transformer auxiliary winding. On DDT zero-crossing the controller delays ~300 ns then turns on the power MOSFET for quasi-resonant valley switching. Absolute max -0.3 to 7 V.
6 FB input Feedback input from opto-coupler. Open-circuit ~5 V, short-circuit current ~0.33 mA. Enters green mode at 2 V, enters burst mode at 1 V (exit 1.1 V); overload protection threshold ~4 V with 80 ms delay. Absolute max -0.3 to 7 V.
7 NC unconnected No connect. Leave floating.
8 HV power_in High-voltage startup pin. Connects directly to the rectified bulk line via internal JFET; delivers ~400 uA constant current to charge VDD capacitor at startup, then switches off to reduce standby loss. Absolute max 700 V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ME8213ASG

CAD (KiCad official)

  • Symbol: ME8213ASG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: me8213asg-etched.step / me8213asg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me8213asg.step / me8213asg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (8 pp, sha256 720ee78ffb84c5fe, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF