← Commit history

Initial commit: component/me8206asg

Ray ·e725a49299 ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# ME8206ASG++**MICRONE** · AC-DC Controllers and Regulators · SOP-8++ME8206ASG from MICRONE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DET | input | Valley detection input. Senses the auxiliary winding voltage; when DET crosses zero, the controller waits 300 ns (T_D_DET) then turns on the power MOSFET at the drain-source valley to minimize switching loss and EMI. |+| 2 | FB | input | Feedback input from the optocoupler. Open-circuit voltage ~5 V; short-circuit current ~0.5 mA. Enters green mode at 1.7 V, burst mode below 1.05 V (exits at 1.15 V), and asserts over-power protection above 3.7 V for 88 ms. |+| 3 | CS | input | Current sense input (SENSE). Monitors primary switch current across the sense resistor for cycle-by-cycle peak-current control. Max current-limit threshold ~0.85 V at FB=3.3 V; 300 ns leading-edge blanking; 120 ns detect-to-control delay. |+| 4 | GND | power_in | Device ground reference for VCC, signal, and driver return. |+| 5 | GATE | output | Gate-drive output for the external power MOSFET. Internally clamped to ~16 V (20 V max). Typical rise time ≥150 ns and fall time ≥100 ns into a 3 nF load (1 V-12 V transition). |+| 6 | VCC | power_in | Chip supply pin. Recommended operating range 10-30 V (30 V abs max). UVLO turn-on ~14.5 V, turn-off ~8.5 V. Internal 31-36 V clamp (10 mA); OVP trips at ~33 V. Operating current ~1.5 mA (typ) at V_FB=3 V. |+| 7 | NC | unconnected | No connection. Leave floating. |+| 8 | HV | power_in | High-voltage startup pin. Connects directly to the rectified DC bus (up to 650 V abs max). Internal JFET current source (~400 µA at V_HV=50 V) charges the VCC capacitor at startup, then turns off once VCC crosses UVLO_OFF to reduce standby loss. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MICRONE |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `ME8206ASG`++## CAD (KiCad official)++- Symbol: `ME8206ASG`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MICRONE datasheet](docs/me8206asg-datasheet.pdf) (10 pp, sha256 `e7567ae048e05da2`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/me8206asg-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "me8206asg",+  "version": "0.1.0",+  "type": "component",+  "description": "MICRONE AC-DC Controllers and Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "me8206asg"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "me8206asg.kicad_sym",+    "me8206asg.kicad_mod",+    "me8206asg.glb",+    "me8206asg.step",+    "me8206asg.lbr",+    "docs/hero.png",+    "docs/me8206asg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file