← Commit history

me8206asg: factory component page (tier=lcsc)

Ray ·0f54cb08af · ·parent 4b8cf6d
1 file changed +116−8
page.json+116−8
@@ -1,13 +1,126 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "me8206asg",+  "title": "ME8206ASG",+  "brief": "MICRONE AC-DC Controllers and Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "MICRONE AC-DC Controllers and Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "me8206asg"   ],+  "component": {+    "mpn": "ME8206ASG",+    "manufacturer": "MICRONE",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "AC-DC Controllers and Regulators",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/76bc721590349eeda5ccbedfb35fdf3c.pdf",+    "parts": {+      "symbol": "me8206asg.kicad_sym",+      "footprint": "me8206asg.kicad_mod",+      "model_3d": "me8206asg.glb",+      "model_3d_step": "me8206asg.step",+      "lbr": "me8206asg.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "DET",+        "type": "input",+        "description": "Valley detection input. Senses the auxiliary winding voltage; when DET crosses zero, the controller waits 300 ns (T_D_DET) then turns on the power MOSFET at the drain-source valley to minimize switching loss and EMI."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Feedback input from the optocoupler. Open-circuit voltage ~5 V; short-circuit current ~0.5 mA. Enters green mode at 1.7 V, burst mode below 1.05 V (exits at 1.15 V), and asserts over-power protection above 3.7 V for 88 ms."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Current sense input (SENSE). Monitors primary switch current across the sense resistor for cycle-by-cycle peak-current control. Max current-limit threshold ~0.85 V at FB=3.3 V; 300 ns leading-edge blanking; 120 ns detect-to-control delay."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference for VCC, signal, and driver return."+      },+      {+        "number": "5",+        "name": "GATE",+        "type": "output",+        "description": "Gate-drive output for the external power MOSFET. Internally clamped to ~16 V (20 V max). Typical rise time \u2265150 ns and fall time \u2265100 ns into a 3 nF load (1 V-12 V transition)."+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_in",+        "description": "Chip supply pin. Recommended operating range 10-30 V (30 V abs max). UVLO turn-on ~14.5 V, turn-off ~8.5 V. Internal 31-36 V clamp (10 mA); OVP trips at ~33 V. Operating current ~1.5 mA (typ) at V_FB=3 V."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Leave floating."+      },+      {+        "number": "8",+        "name": "HV",+        "type": "power_in",+        "description": "High-voltage startup pin. Connects directly to the rectified DC bus (up to 650 V abs max). Internal JFET current source (~400 \u00b5A at V_HV=50 V) charges the VCC capacitor at startup, then turns off once VCC crosses UVLO_OFF to reduce standby loss."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/76bc721590349eeda5ccbedfb35fdf3c.pdf",+        "pages": 10,+        "sha256": "e7567ae048e05da2",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "MICRONE",+      "Package": "SOP-8",+      "Category": "PMIC",+      "Pins": "8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "me8206asg"+  ],+  "discovery_pitch": "ME8206ASG (MICRONE) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +138,5 @@     "docs/me8206asg-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file