component

ME8200M6G-N

Public Made by Adom

by adom

MICRONE AC-DC Controllers and Regulators, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmicme8200m6g-n
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me8200m6g-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
me8200m6g-n-etched.fit.json me8200m6g-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me8200m6g-n-etched.glb me8200m6g-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me8200m6g-n-etched.step me8200m6g-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me8200m6g-n.glb Publish 0.1.0 · Ray
me8200m6g-n.kicad_mod Publish 0.1.0 · Ray
me8200m6g-n.kicad_sym Publish 0.1.0 · Ray
me8200m6g-n.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
me8200m6g-n.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json me8200m6g-n: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md me8200m6g-n: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ME8200M6G-N

MICRONE · AC-DC Controllers and Regulators · SOT-23-6

ME8200M6G-N from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground return pin for the controller. All internal circuitry references this node.
2 FB input Feedback input. Senses the loop feedback from the opto-coupler; controls PWM duty cycle, entry into green mode (VFB≈1.8V) and burst mode (VFB≈1.0V), and over-load protection (VTH_PL≈3.5V). Open-pin voltage ~5V.
3 RI input Oscillator frequency-setting pin. Connect an external resistor to GND; operating frequency F = 6500/RI (kHz, RI in kΩ). Open-pin voltage ~2V.
4 SENSE input Current-sense input. Monitors the primary MOSFET source current through the sense resistor; peak current-limit threshold VTH_OC ≈ 0.75V with 220ns leading-edge blanking and 120ns propagation delay.
5 VDD power_in Chip supply pin. Recommended operating range 10-30V. UVLO_ON ≈ 14V (start), UVLO_OFF ≈ 9V, clamped at ~35V, OVP triggers at ~28V. Startup current ~5µA, operating current ~1mA.
6 GATE output Gate-drive output for the external power MOSFET. Soft-driver totem-pole output, VOH ≥ 10V @ 20mA, VOL ≤ 0.8V @ -20mA, internally clamped to ~18V. Rise/fall ~220ns/70ns into 1nF.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • ME8200M6G-N
  • ME8200M6G-ND8G-N
  • ME8200M6G-NSG-N

CAD (KiCad official)

  • Symbol: ME8200M6G-N
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: me8200m6g-n-etched.step / me8200m6g-n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me8200m6g-n.step / me8200m6g-n.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
me8200m6g-n.step 97 KB You want the bare part, or you mark your own boards.
me8200m6g-n-etched.step 2.2 MB You want the part with ME8200M6G-N already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 538 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (11 pp, sha256 69d9e481e57b39a1, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF