main
Ray
Publish 0.1.0
8d5eb79
ME6251C33M5G
MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5
ME6251C33M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; the datasheet specifies an input voltage range of 1.2V to 5.5V. |
| 2 | VSS | power_in | Ground pin for the regulator. |
| 3 | CE | input | Enable pin; the output is enabled at 1.0V or above and disabled at 0.5V or below. |
| 4 | NC | unconnected | No connection (empty pin). |
| 5 | VOUT | power_out | Regulated output pin; supplies up to 500mA with an output voltage range of 1.0V to 5.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 6.5 | V | 3 | |||
| Output current | IOUT | 600 | mA | 3 | |||
| Package power dissipation SOT-23-5 | PD | 300 | mW | 3 | |||
| Operating temperature | Ta | -40 | 85 | ℃ | 3 | ||
| Storage temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| Operating current | ISS | 30 | 60 | μA | VIN=VOUT+1V | 4 | |
| Shutdown current | ICEL | 0.1 | 1 | μA | VCE=0V | 4 | |
| Reverse current | IREV | 0.01 | 1.5 | μA | VIN=0V,VOUT=6.0V | 4 | |
| VOUT output leakage current | IREVS | 1.4 | 2.8 | μA | VIN=5.0V,VOUT=6.0V | 4 | |
| Maximum output current | IOUTMAX | 500 | mA | VIN=VOUT+1V | 4 | ||
| Load regulation | ΔVOUT | 9 | mV | 1mA≤IOUT≤100mA | 4 | ||
| Dropout voltage | VDIF1 | 120 | mV | IOUT=100mA | 4 | ||
| Dropout voltage | VDIF2 | 260 | mV | IOUT=200mA | 4 | ||
| Line regulation | ΔVOUT/(ΔVIN•VOUT) | 0.05 | %/V | IOUT=30mA, VOUT+1V≤VIN≤6.5V | 4 | ||
| CE enable-on voltage | VCEH | 1 | V | 开启 (on) | 4 | ||
| CE enable-off voltage | VCEL | 0.5 | V | 关断 (off) | 4 | ||
| Power supply rejection ratio | PSRR | 70 | dB | VIN=VOUT(S)+1.0V, f=1.0kHz, △Vrip=0.5Vrms, IOUT=10mA | 4 | ||
| Short-circuit current | ISHORT | 50 | mA | 4 |
CAD (KiCad official)
- Symbol:
ME6251C33M5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
me6251c33m5g-etched.step/me6251c33m5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6251c33m5g.step/me6251c33m5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (7 pp, sha256
594f19aa7f0721d4, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME6251C33M5G
**MICRONE** · Linear Voltage Regulators (LDO) · SOT-23-5
ME6251C33M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; the datasheet specifies an input voltage range of 1.2V to 5.5V. |
| 2 | VSS | power_in | Ground pin for the regulator. |
| 3 | CE | input | Enable pin; the output is enabled at 1.0V or above and disabled at 0.5V or below. |
| 4 | NC | unconnected | No connection (empty pin). |
| 5 | VOUT | power_out | Regulated output pin; supplies up to 500mA with an output voltage range of 1.0V to 5.0V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | | | 6.5 | V | | 3 |
| Output current | IOUT | | | 600 | mA | | 3 |
| Package power dissipation SOT-23-5 | PD | | | 300 | mW | | 3 |
| Operating temperature | Ta | -40 | | 85 | ℃ | | 3 |
| Storage temperature | Tstg | -40 | | 125 | ℃ | | 3 |
| Operating current | ISS | | 30 | 60 | μA | VIN=VOUT+1V | 4 |
| Shutdown current | ICEL | | 0.1 | 1 | μA | VCE=0V | 4 |
| Reverse current | IREV | | 0.01 | 1.5 | μA | VIN=0V,VOUT=6.0V | 4 |
| VOUT output leakage current | IREVS | | 1.4 | 2.8 | μA | VIN=5.0V,VOUT=6.0V | 4 |
| Maximum output current | IOUTMAX | | 500 | | mA | VIN=VOUT+1V | 4 |
| Load regulation | ΔVOUT | | 9 | | mV | 1mA≤IOUT≤100mA | 4 |
| Dropout voltage | VDIF1 | | 120 | | mV | IOUT=100mA | 4 |
| Dropout voltage | VDIF2 | | 260 | | mV | IOUT=200mA | 4 |
| Line regulation | ΔVOUT/(ΔVIN•VOUT) | | 0.05 | | %/V | IOUT=30mA, VOUT+1V≤VIN≤6.5V | 4 |
| CE enable-on voltage | VCEH | | 1 | | V | 开启 (on) | 4 |
| CE enable-off voltage | VCEL | | 0.5 | | V | 关断 (off) | 4 |
| Power supply rejection ratio | PSRR | | 70 | | dB | VIN=VOUT(S)+1.0V, f=1.0kHz, △Vrip=0.5Vrms, IOUT=10mA | 4 |
| Short-circuit current | ISHORT | | 50 | | mA | | 4 |
## CAD (KiCad official)
- Symbol: `ME6251C33M5G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `me6251c33m5g-etched.step` / `me6251c33m5g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me6251c33m5g.step` / `me6251c33m5g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me6251c33m5g-datasheet.pdf) (7 pp, sha256 `594f19aa7f0721d4`, retrieved 2026-11-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me6251c33m5g-datasheet.pdf)