4acefd2
ME6239A50M3G
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
ME6239A50M3G from MICRONE, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference (0V) for the regulator. Connect to system ground. |
| 2 | VOUT | power_out | Regulated 5.0V output (±1%) capable of sourcing up to 250mA. Requires a low-ESR ceramic output capacitor (10uF X5R/X7R typical) for stability; 20-100uF may be added to suppress output overshoot. |
| 3 | VIN | power_in | Unregulated power supply input, 5.0V to 30V operating range (30V absolute maximum). Requires a 10uF input capacitor; use electrolytic or tantalum instead of ceramic when VIN > 15V to absorb hot-plug voltage spikes that may exceed 40V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-3 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
ME6239A50M3GME6239A50M3GPGME6239A50M3GTG
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (VOUT, multiplier of nominal) | VOUT(E) | 0.99 | 1.01 | X | IOUT=10mA | 4 | |
| Input voltage | VIN | 5 | 30 | V | 4 | ||
| Maximum output current | IOUT_max | 250 | mA | VIN= VOUT+1.5V | 4 | ||
| Load regulation | ΔVOUT | 30 | 60 | mV | VIN= VOUT +1.5V, 1mA≤IOUT≤200mA | 4 | |
| Dropout voltage | VDIF | 190 | mV | IOUT =50mA | 4 | ||
| Dropout voltage | VDIF | 380 | mV | IOUT =100mA | 4 | ||
| Quiescent current | ISS | 1.5 | 2.5 | μA | VIN= VOUT +1.0V | 4 | |
| Line regulation | ΔVOUT/(ΔVIN×VOUT) | 0.06 | 0.1 | %/V | IOUT =1mA, VOUT +1.0V≤VIN≤30V | 4 | |
| Short-circuit current | ISHORT | 42 | 80 | mA | VOUT=0V | 4 | |
| Absolute maximum input voltage | VIN | 30 | V | 3 | |||
| Absolute maximum output current | IOUT | 250 | mA | 3 | |||
| Storage temperature range | TSTG | -55 | 150 | ℃ | 3 | ||
| Operating temperature range | TOPR | -40 | 150 | ℃ | 3 | ||
| Soldering temperature | 260 | ℃ | 10 sec | 3 | |||
| Output voltage temperature coefficient | 65 | ppm/℃ | IOUT =10mA, -40℃≤Ta≤85℃ | 4 | |||
| Thermal resistance, junction to ambient (SOT23-3) | θja | 230 | ℃/W | SOT23-3 package | 3 |
CAD (KiCad official)
- Symbol:
ME6239A50M3G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
me6239a50m3g-etched.step/me6239a50m3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6239a50m3g.step/me6239a50m3g.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
me6239a50m3g.step |
59 KB | You want the bare part, or you mark your own boards. |
me6239a50m3g-etched.step |
2.4 MB | You want the part with ME6239A50M3G already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 578 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (8 pp, sha256
409f8e590878e966, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME6239A50M3G
**MICRONE** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
ME6239A50M3G from MICRONE, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference (0V) for the regulator. Connect to system ground. |
| 2 | VOUT | power_out | Regulated 5.0V output (±1%) capable of sourcing up to 250mA. Requires a low-ESR ceramic output capacitor (10uF X5R/X7R typical) for stability; 20-100uF may be added to suppress output overshoot. |
| 3 | VIN | power_in | Unregulated power supply input, 5.0V to 30V operating range (30V absolute maximum). Requires a 10uF input capacitor; use electrolytic or tantalum instead of ceramic when VIN > 15V to absorb hot-plug voltage spikes that may exceed 40V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-3 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `ME6239A50M3G`
- `ME6239A50M3GPG`
- `ME6239A50M3GTG`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (VOUT, multiplier of nominal) | VOUT(E) | 0.99 | | 1.01 | X | IOUT=10mA | 4 |
| Input voltage | VIN | 5 | | 30 | V | | 4 |
| Maximum output current | IOUT_max | 250 | | | mA | VIN= VOUT+1.5V | 4 |
| Load regulation | ΔVOUT | | 30 | 60 | mV | VIN= VOUT +1.5V, 1mA≤IOUT≤200mA | 4 |
| Dropout voltage | VDIF | | | 190 | mV | IOUT =50mA | 4 |
| Dropout voltage | VDIF | | | 380 | mV | IOUT =100mA | 4 |
| Quiescent current | ISS | | 1.5 | 2.5 | μA | VIN= VOUT +1.0V | 4 |
| Line regulation | ΔVOUT/(ΔVIN×VOUT) | | 0.06 | 0.1 | %/V | IOUT =1mA, VOUT +1.0V≤VIN≤30V | 4 |
| Short-circuit current | ISHORT | | 42 | 80 | mA | VOUT=0V | 4 |
| Absolute maximum input voltage | VIN | | | 30 | V | | 3 |
| Absolute maximum output current | IOUT | | | 250 | mA | | 3 |
| Storage temperature range | TSTG | -55 | | 150 | ℃ | | 3 |
| Operating temperature range | TOPR | -40 | | 150 | ℃ | | 3 |
| Soldering temperature | | | | 260 | ℃ | 10 sec | 3 |
| Output voltage temperature coefficient | | | 65 | | ppm/℃ | IOUT =10mA, -40℃≤Ta≤85℃ | 4 |
| Thermal resistance, junction to ambient (SOT23-3) | θja | | 230 | | ℃/W | SOT23-3 package | 3 |
## CAD (KiCad official)
- Symbol: `ME6239A50M3G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files: `me6239a50m3g-etched.step` / `me6239a50m3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me6239a50m3g.step` / `me6239a50m3g.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`me6239a50m3g.step`](me6239a50m3g.step) | 59 KB | You want the bare part, or you mark your own boards. |
| [`me6239a50m3g-etched.step`](me6239a50m3g-etched.step) | 2.4 MB | You want the part with `ME6239A50M3G` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 578 faces against 69 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me6239a50m3g-datasheet.pdf) (8 pp, sha256 `409f8e590878e966`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me6239a50m3g-datasheet.pdf)