ME6217C33P5G

{
 "schema": "adom.pads/1",
 "slug": "me6217c33p5g",
 "footprint": "SOT-89-5",
 "generated_from": {
  "footprint": "SOT-89-5@sha256:9abcedfc1a89eea0",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.85,
   -1.5
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-89-5@sha256:9abcedfc1a89eea0"
 },
 "pad_count": 5,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.85,
    -1.5
   ],
   "rot": 0.0,
   "size": [
    1.5,
    0.7
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "CE",
   "type": "input",
   "description": "Chip enable / ON-OFF control. Drive above VCEH (>=1.5 V) to enable the regulator; drive below VCEL (<=0.3 V) to shut it down (Iq ~0.1 uA). Not internally pulled up or down; must not be left floating. Applying an intermediate voltage (0.3 V to VIN-0.3 V) increases quiescent current.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-89-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "custom",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    0.8,
    2.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VSS",
   "type": "power_in",
   "description": "Ground reference for the regulator. Return path for input and output capacitors. Should be connected with a low-impedance trace back to the CIN/CL grounds.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-89-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.85,
    1.5
   ],
   "rot": 0.0,
   "size": [
    1.5,
    0.7
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection. Leave floating or tie to VSS on the PCB; do not use as a routing via.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-89-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.85,
    1.5
   ],
   "rot": 0.0,
   "size": [
    1.5,
    0.7
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VIN",
   "type": "power_in",
   "description": "Unregulated input supply, 2.0 V to 6.5 V operating range (7.0 V absolute maximum). Requires a >=4.7 uF (10 uF typical) low-ESR input capacitor placed close to the pin for stability.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-89-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.85,
    -1.5
   ],
   "rot": 0.0,
   "size": [
    1.5,
    0.7
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "VOUT",
   "type": "power_out",
   "description": "Regulated 3.3 V output (±1%), up to 800 mA when VIN >= VOUT+1.0 V. Requires a >=4.7 uF (10 uF typical) low-ESR output capacitor to VSS; ESR <=0.5 ohm recommended. Must not exceed VIN+0.3 V to avoid parasitic-diode conduction back to VIN.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-89-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}