main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers me6215c36m5g: viewers rendered from the public page · Ray
me6215c36m5g-etched.glb me6215c36m5g: factory component page (tier=lcsc) · Ray
me6215c36m5g-etched.step me6215c36m5g: factory component page (tier=lcsc) · Ray
me6215c36m5g-hero.glb me6215c36m5g: hero GLB from the etched model (keeps the MPN mark) · Ray
me6215c36m5g-hero.overlay.json me6215c36m5g: hero GLB from the etched model (keeps the MPN mark) · Ray
me6215c36m5g.glb Publish 0.1.0 · Ray
me6215c36m5g.kicad_mod Publish 0.1.0 · Ray
me6215c36m5g.kicad_sym Publish 0.1.0 · Ray
me6215c36m5g.lbr Publish 0.1.0 · Ray
me6215c36m5g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

ME6215C36M5G

MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5

ME6215C36M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power input, operating up to 18V (absolute maximum 18V).
2 VSS power_in Ground pin of the regulator.
3 CE input Active-high ON/OFF control; VCE high of 1.3V starts up the output, VCE low of 0.8V shuts it down, and voltage is limited to Vss-0.3V to VIN+0.3V.
4 NC unconnected No connect pin.
5 VOUT power_out Regulated output, up to 300mA maximum output current with 580mA over-current limit and 25mA typical short-circuit current.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT(E) 0.98 1.02 x VOUT(T) IOUT=10mA, VIN=VOUT+1V 4
Input Voltage VIN 18 V 4
Maximum Output Current IOUTMAX 300 mA VIN=VOUT+1V 4
Supply Current ISS 6 10 μA VIN=VOUT+1V 4
Stand-by Current ICEL 0 1 μA VCE=0V 4
Line Regulation ΔVOUT 20 mV IOUT=30mA, VOUT+1V≤VIN≤18V 4
CE High Voltage VCEH 1.3 V Start up 4
CE Low Voltage VCEL 0.8 V Shut down 4
Short-circuit Current ISHORT 25 50 mA VIN=VOUT+1V, VCE=VIN, VOUT=0V 4
Load Regulation ΔVOUT 4 mV VIN=VOUT+1V, 1mA≤IOUT≤100mA 4
Dropout Voltage 1 VDIF1 160 mV IOUT=100mA 4
Dropout Voltage 2 VDIF2 320 mV IOUT=200mA 4
Over Current Protection Ilimit 580 mA VIN=VOUT+1V 4
Input Voltage (abs max) VIN 18 V 4
Output Current (abs max) IOUT 580 mA 4
Power Dissipation SOT23-5 PD 250 mW SOT23-5 4
Operating Temperature Range TOPR -40 125 °C 4
Storage Temperature Range TSTG -40 150 °C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ppa body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ME6215C36M5G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: me6215c36m5g-etched.step / me6215c36m5g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me6215c36m5g.step / me6215c36m5g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (7 pp, sha256 b37d57290e3a1d7d, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF