Generated by kicad-footprint-generator · KiCad file format 20260206
ME6214C18M5G
MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5
ME6214C18M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input pin; the input voltage range is 2.0~18V and the absolute maximum input voltage is 18V. |
| 2 | VSS | power_in | Ground pin for the regulator. |
| 3 | CE | input | Enable pin, active high (ON when high, OFF when low); it must not be left floating and its voltage must stay between Vss-0.3V and VIN+0.3V. |
| 4 | NC | unconnected | No connection on the SOT23-5 package. |
| 5 | VOUT | power_out | Regulated voltage output pin; its voltage must stay between Vss-0.3V and VIN+0.3V, and the output current is rated at 300mA for this variant. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (effective), VOUT(E) | VOUT(E) | 0.98 | V | IOUT=30mA, VIN= VOUT+1V | 5 | ||
| Output voltage (specified), VOUT(T) | VOUT(T) | 1.02 | V | 5 | |||
| Maximum output current, IOUTMAX | IOUTMAX | 300 | mA | VIN= VOUT+1V | 5 | ||
| Load regulation, ΔVOUT | ΔVOUT | 7 | mV | VIN= VOUT+1V , 1mA≤IOUT≤100mA | 5 | ||
| Dropout voltage, VDIF1 | VDIF1 | 300 | mV | IOUT =100mA | 5 | ||
| Dropout voltage, VDIF2 | VDIF2 | 600 | mV | IOUT =200mA | 5 | ||
| Quiescent current, ISS | ISS | 0.6 | 1.5 | μA | VIN= VOUT+1V | 5 | |
| Shutdown current, ICEL | ICEL | 0.01 | 0.1 | μA | VCE=0V | 5 | |
| Line regulation, ΔVOUT/(ΔVIN·VOUT) | 0.1 | %/V | IOUT =10mA, VOUT+1V ≤VIN≤18V | 5 | |||
| CE pin high level voltage, VCEH | VCEH | 1.3 | V | 开启,输出电压稳定 | 5 | ||
| CE pin low level voltage, VCEL | VCEL | 0.7 | V | 关断,输出电压为 0 | 5 | ||
| Input voltage (absolute maximum) | VIN | 18 | V | 4 | |||
| Output pin current (absolute maximum) | IOUT | 400 | mA | 4 | |||
| Allowable power dissipation, SOT23-3/5 | PD | 250 | mW | SOT23-3/5 package | 4 | ||
| Operating temperature range | TOPR | -40 | 125 | ℃ | 4 | ||
| Storage temperature range | TSTG | -40 | 150 | ℃ | 4 | ||
| Short-circuit current, ISHORT | ISHORT | 21 | mA | VIN= VOUT+1V, VCE=VIN, VOUT=0V | 6 | ||
| Current limit, Ilimit | Ilimit | 500 | mA | VOUT=VOUT(E)×0.95, VIN= VOUT (T)+2V | 6 | ||
| Load-capacitor auto-discharge resistance, RDCHG | RDCHG | 500 | Ω | VCE=VSS, VOUT=VOUT(T) | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ME6214C18M5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.55 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
me6214c18m5g-etched.step/me6214c18m5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6214c18m5g.step/me6214c18m5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (14 pp, sha256
a03bff2b4f3b40c3, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).