component
ME6211C28R5G
Public Made by Adomby adom
MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownME6211C28R5G
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-353
ME6211C28R5G from MICRONE, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with an operating voltage range of 2V to 6.0V and an absolute maximum rating of 6.5V. |
| 2 | VSS | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | ON/OFF control: CE high (1.0V min) starts up the regulator and CE low (0.5V max) shuts it down, with CE limited to VSS-0.3V to VIN+0.3V. |
| 4 | NC | unconnected | No connect; this pin is not internally connected. |
| 5 | VOUT | power_out | Regulated output of 2.8V for this variant, rated for a maximum output current of 450mA and limited to VSS-0.3V to VIN+0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-353 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (effective, VOUT(E)) | VOUT(E) | 0.99 | V | IOUT=30mA, VIN= VOUT+1V | 8 | ||
| Output Voltage (specified, VOUT(T)) | VOUT(T) | 1.01 | V | 8 | |||
| Maximum Output Current | IOUTMAX | 450 | mA | VIN= VOUT+1V | 8 | ||
| Load Regulation | ΔVOUT | 7 | mV | VIN= VOUT+1V, 1mA≤IOUT≤100mA | 8 | ||
| Dropout Voltage | VDIF1 | 110 | mV | IOUT =100mA | 8 | ||
| Dropout Voltage | VDIF2 | 220 | mV | IOUT =200mA | 8 | ||
| Supply Current | ISS | 30 | 60 | μA | VIN= VOUT+1V | 8 | |
| Stand-by Current | ICEL | 0.1 | 1 | μA | VCE＝0V | 8 | |
| Line Regulation | ΔVOUT/(ΔVIN•VOUT) | 0.04 | %/V | IOUT =30mA, VOUT+1V ≤VIN≤6.5V | 8 | ||
| CE High Voltage (start up) | VCEH | 1 | V | Start up | 8 | ||
| CE Low Voltage (shut down) | VCEL | 0.5 | V | Shut down | 8 | ||
| Output Noise | EN | 50 | uVrms | IOUT =40mA，300Hz~50kHz | 8 | ||
| Ripple Rejection Rate | PSRR | 70 | dB | IOUT=10mA, 1kHZ; VIN = [VOUT +1]V +1Vp-pAC | 8 | ||
| Ripple Rejection Rate | PSRR | 62 | dB | IOUT=100mA, 10kHZ; VIN = [VOUT +1]V +1Vp-pAC | 8 | ||
| Short-circuit Current | ISHORT | 65 | mA | VIN= VOUT+1V, VCE＝VIN, VOUT＝0V | 8 | ||
| Input Voltage | VIN | 6.5 | V | 5 | |||
| Output Current | IOUT | 600 | mA | 5 | |||
| Power Dissipation | PD | 250 | mW | SOT353 package | 5 | ||
| Operating Temperature Range | TOPR | -40 | 150 | ℃ | 5 | ||
| Storage Temperature Range | TSTG | -40 | 150 | ℃ | 5 | ||
| Operating Voltage Range | 2 | 6 | V | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro | 23 |
CAD (KiCad official)
- Symbol:
ME6211C28R5G - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
me6211c28r5g-etched.step/me6211c28r5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6211c28r5g.step/me6211c28r5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (23 pp, sha256
6057088830df4000, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).