component
ME6211C28M5G-N
Public Made by Adomby adom
MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
me6211c28m5g-n: specified limits as data (metadata.characteristics, 19 rows from the datasheet)
7c15aaf
ME6211C28M5G-N
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
ME6211C28M5G-N from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin. Operating range 2V-6V (absolute max 6.5V). Bypass to VSS with a 1uF ceramic capacitor close to the pin. |
| 2 | VSS | power_in | Ground reference pin (接地引脚). All input, output and CE voltages are referenced to this node. |
| 3 | CE | input | Chip enable (使能端). Drive high (VCEH ≥ 1.0V) to enable the regulator; drive low (VCEL ≤ 0.7V) to shut down (typ. 0.1uA / 1uA max). CE range VSS−0.3V to VIN+0.3V. Must NOT be left floating. |
| 4 | NC | unconnected | No internal connection (空). Leave floating or tie to VSS on the PCB. |
| 5 | VOUT | power_out | Regulated LDO output (电压输出端). Fixed 2.8V ±2% for the C28 option, capable of up to 450-500mA. Requires a 1uF ceramic output capacitor (CL) to VSS for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
ME6211C28M5G-NME6211C28M5G-NCxxM5ME6211C28M5G-NCxxN5ME6211C28M5G-NCxxDFNME6211C28M5G-NAxxM3ME6211C28M5G-NAxxP3
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) absolute maximum | VIN | 6.5 | V | 2 | |||
| Output current absolute maximum | IOUT | 600 | mA | 2 | |||
| Allowable power dissipation, SOT-23 (SOT-23-5 not named separately) | PD | 250 | mW | SOT-23 package as listed; SOT-353 also 250 mW | 2 | ||
| Storage temperature | TSTG | -40 | 125 | ℃ | 2 | ||
| Operating temperature | TOPR | -40 | 85 | ℃ | 2 | ||
| Operating input voltage range (series feature list) | 2 | 6 | V | ME6211 series feature list: 工作电压范围 | 1 | ||
| Output voltage accuracy (series feature list) | -2 | 2 | % | ME6211 series feature list: 高输出精度 ±2% | 1 | ||
| Output voltage VOUT(E) (effective) | VOUT(E) | 0.98 | 1.02 | x VOUT(T) | IOUT=30mA, VIN=VOUT+1V (Note 1, Note 2); VOUT(T) = 2.8 V for ME6211C28 | 4 | |
| Maximum output current | IOUTMAX | 450 | mA | VIN=VOUT+1V | 4 | ||
| Load regulation | ΔVOUT | 7 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 4 | ||
| Dropout voltage VDIF1 | VDIF1 | 110 | mV | IOUT=100mA (Note 3) | 4 | ||
| Dropout voltage VDIF2 | VDIF2 | 220 | mV | IOUT=200mA (Note 3) | 4 | ||
| Quiescent current | ISS | 55 | μA | VIN=VOUT+1V | 4 | ||
| Shutdown current | ICEL | 0 | μA | VCE=0V | 4 | ||
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | 0.04 | %/V | IOUT=40mA, VOUT+1V≤VIN≤6.5V | 4 | ||
| CE pin high level (start up) | VCEH | 1 | V | Start up | 4 | ||
| CE pin low level (shut down) | VCEL | 0.7 | V | Shut down | 4 | ||
| Output noise | EN | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 4 | ||
| Power supply rejection ratio | PSRR | 70 | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=50mA, f=1kHz | 4 |
CAD (KiCad official)
- Symbol:
ME6211C28M5G-N - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
me6211c28m5g-n-etched.step/me6211c28m5g-n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6211c28m5g-n.step/me6211c28m5g-n.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
me6211c28m5g-n.step |
85 KB | You want the bare part, or you mark your own boards. |
me6211c28m5g-n-etched.step |
2.4 MB | You want the part with ME6211C28M5G-N already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 592 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (12 pp, sha256
1d8126fbc091b114, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME6211C28M5G-N
**MICRONE** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
ME6211C28M5G-N from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin. Operating range 2V-6V (absolute max 6.5V). Bypass to VSS with a 1uF ceramic capacitor close to the pin. |
| 2 | VSS | power_in | Ground reference pin (接地引脚). All input, output and CE voltages are referenced to this node. |
| 3 | CE | input | Chip enable (使能端). Drive high (VCEH ≥ 1.0V) to enable the regulator; drive low (VCEL ≤ 0.7V) to shut down (typ. 0.1uA / 1uA max). CE range VSS−0.3V to VIN+0.3V. Must NOT be left floating. |
| 4 | NC | unconnected | No internal connection (空). Leave floating or tie to VSS on the PCB. |
| 5 | VOUT | power_out | Regulated LDO output (电压输出端). Fixed 2.8V ±2% for the C28 option, capable of up to 450-500mA. Requires a 1uF ceramic output capacitor (CL) to VSS for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `ME6211C28M5G-N`
- `ME6211C28M5G-NCxxM5`
- `ME6211C28M5G-NCxxN5`
- `ME6211C28M5G-NCxxDFN`
- `ME6211C28M5G-NAxxM3`
- `ME6211C28M5G-NAxxP3`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) absolute maximum | VIN | | | 6.5 | V | | 2 |
| Output current absolute maximum | IOUT | | | 600 | mA | | 2 |
| Allowable power dissipation, SOT-23 (SOT-23-5 not named separately) | PD | | | 250 | mW | SOT-23 package as listed; SOT-353 also 250 mW | 2 |
| Storage temperature | TSTG | -40 | | 125 | ℃ | | 2 |
| Operating temperature | TOPR | -40 | | 85 | ℃ | | 2 |
| Operating input voltage range (series feature list) | | 2 | | 6 | V | ME6211 series feature list: 工作电压范围 | 1 |
| Output voltage accuracy (series feature list) | | -2 | | 2 | % | ME6211 series feature list: 高输出精度 ±2% | 1 |
| Output voltage VOUT(E) (effective) | VOUT(E) | 0.98 | | 1.02 | x VOUT(T) | IOUT=30mA, VIN=VOUT+1V (Note 1, Note 2); VOUT(T) = 2.8 V for ME6211C28 | 4 |
| Maximum output current | IOUTMAX | 450 | | | mA | VIN=VOUT+1V | 4 |
| Load regulation | ΔVOUT | | | 7 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 4 |
| Dropout voltage VDIF1 | VDIF1 | | | 110 | mV | IOUT=100mA (Note 3) | 4 |
| Dropout voltage VDIF2 | VDIF2 | | | 220 | mV | IOUT=200mA (Note 3) | 4 |
| Quiescent current | ISS | | | 55 | μA | VIN=VOUT+1V | 4 |
| Shutdown current | ICEL | | | 0 | μA | VCE=0V | 4 |
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | | | 0.04 | %/V | IOUT=40mA, VOUT+1V≤VIN≤6.5V | 4 |
| CE pin high level (start up) | VCEH | 1 | | | V | Start up | 4 |
| CE pin low level (shut down) | VCEL | | | 0.7 | V | Shut down | 4 |
| Output noise | EN | | | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 4 |
| Power supply rejection ratio | PSRR | 70 | | | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=50mA, f=1kHz | 4 |
## CAD (KiCad official)
- Symbol: `ME6211C28M5G-N`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `me6211c28m5g-n-etched.step` / `me6211c28m5g-n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me6211c28m5g-n.step` / `me6211c28m5g-n.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`me6211c28m5g-n.step`](me6211c28m5g-n.step) | 85 KB | You want the bare part, or you mark your own boards. |
| [`me6211c28m5g-n-etched.step`](me6211c28m5g-n-etched.step) | 2.4 MB | You want the part with `ME6211C28M5G-N` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 592 faces against 102 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me6211c28m5g-n-datasheet.pdf) (12 pp, sha256 `1d8126fbc091b114`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me6211c28m5g-n-datasheet.pdf)