main
Ray
Publish 0.1.0
cac7a93
ME6119C36M5G
MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5
ME6119C36M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the datasheet gives an operating range of 2.5 V to 18 V and an absolute maximum input voltage of 18 V. |
| 2 | VSS | power_in | Ground reference pin. |
| 3 | CE | input | Enable input: a level above 1.30 V starts up the regulator and a level below 0.8 V shuts it down, with the CE voltage limited to Vss-0.3 V to VIN+0.3 V. |
| 4 | NC | unconnected | No internal connection; leave floating. |
| 5 | VOUT | power_out | Regulated LDO output with a maximum output current of 400 mA and an output voltage limited to Vss-0.3 V to VIN+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 (Input voltage) | VIN | 18 | V | 4 | |||
| 输出电流 (Output current) | IOUT | 500 | mA | 4 | |||
| 耗散功率 (Power dissipation), SOT23 | PD | 300 | mW | SOT23 package | 4 | ||
| 工作温度范围 (Operating temperature range) | TOPR | -40 | 125 | ℃ | 4 | ||
| 存储温度范围 (Storage temperature range) | TSTG | -40 | 150 | ℃ | 4 | ||
| 焊接温度 (Soldering temperature) | 260 | ℃ | 4 sec | 4 | |||
| 工作电压范围 (Operating voltage range) | 2.5 | 18 | V | 1 |
CAD (KiCad official)
- Symbol:
ME6119C36M5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
me6119c36m5g-etched.step/me6119c36m5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6119c36m5g.step/me6119c36m5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (10 pp, sha256
c7d4103d2fc6a40f, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME6119C36M5G
**MICRONE** · Linear Voltage Regulators (LDO) · SOT-23-5
ME6119C36M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the datasheet gives an operating range of 2.5 V to 18 V and an absolute maximum input voltage of 18 V. |
| 2 | VSS | power_in | Ground reference pin. |
| 3 | CE | input | Enable input: a level above 1.30 V starts up the regulator and a level below 0.8 V shuts it down, with the CE voltage limited to Vss-0.3 V to VIN+0.3 V. |
| 4 | NC | unconnected | No internal connection; leave floating. |
| 5 | VOUT | power_out | Regulated LDO output with a maximum output current of 400 mA and an output voltage limited to Vss-0.3 V to VIN+0.3 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 (Input voltage) | VIN | | | 18 | V | | 4 |
| 输出电流 (Output current) | IOUT | | | 500 | mA | | 4 |
| 耗散功率 (Power dissipation), SOT23 | PD | | | 300 | mW | SOT23 package | 4 |
| 工作温度范围 (Operating temperature range) | TOPR | -40 | | 125 | ℃ | | 4 |
| 存储温度范围 (Storage temperature range) | TSTG | -40 | | 150 | ℃ | | 4 |
| 焊接温度 (Soldering temperature) | | | | 260 | ℃ | 4 sec | 4 |
| 工作电压范围 (Operating voltage range) | | 2.5 | | 18 | V | | 1 |
## CAD (KiCad official)
- Symbol: `ME6119C36M5G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `me6119c36m5g-etched.step` / `me6119c36m5g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me6119c36m5g.step` / `me6119c36m5g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me6119c36m5g-datasheet.pdf) (10 pp, sha256 `c7d4103d2fc6a40f`, retrieved 2026-11-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me6119c36m5g-datasheet.pdf)