main
Ray
me4315am6g-1: specified limits as data (metadata.characteristics, 16 rows from the datasheet)
d6a0971
ME4315AM6G-1
MICRONE · Voltage Reference · SOT-23-6
ME4315AM6G-1 from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCTRL | input | Voltage control loop input. Connects to the resistor divider (R1/R2) that senses the output voltage; the internal voltage-loop op-amp compares this against the 1.21V reference to regulate Vout. |
| 2 | GND | power_in | Ground / device return. All internal references and op-amps are referred to this node. |
| 3 | VOUT | output | Controller error-amp output; open-drain / sink-only (VOL ≈ 400mV at 10mA sink). Typically drives the cathode of an optocoupler LED (with pull-up Rcut) to feed back to the primary-side PWM controller. Short-circuit current to VCC is ~27mA (typ), 70mA (max). |
| 4 | ICTRL | input | Current control loop input; inverting node of the current-loop op-amp used to program/compensate the CC threshold. Sources ~21µA from its own pin when driven to -70mV (IIBI). |
| 5 | VSENSE | input | Current-sense input for the CC loop. Compared against the internal 70mV (typ, 68.5-75.5mV) current-limit reference to set the output current limit: I_LIMIT = (V_SENSE · V_REF) / ((V_SENSE + V_REF) · Rss). |
| 6 | VCC | power_in | Supply input, 3V to 36V operating range (36V absolute max). Typical quiescent current 0.85mA. Bypass locally with a ceramic capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
ME4315AM6G-1
Related parts (NOT interchangeable)
The extractor listed these alongside ME4315AM6G-1, but they are different parts with different electrical characteristics. Do not order them as substitutes.
ME4315AM6G-2
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent operating current (静态工作电流) | Icc | 0.7 | 0.85 | 1 | mA | 4 | |
| Voltage control loop transconductance gain (电压控制环路传导增益) | Gmv | 1 | 3.5 | mA/mV | 4 | ||
| Voltage control loop reference voltage, ME4315-1 variant (电压控制环路参考电压) | Vref | 1.198 | 1.21 | V | ME4315-1 | 4 | |
| Current control loop transconductance gain (电流控制环路传导增益) | Gmi | 1.5 | 7 | mA/mV | 4 | ||
| Current control loop reference voltage (电流控制环路参考电压) | VSENSE | 68.5 | 72 | 75.5 | mV | Iout=2.5mA | 4 |
| Output short-circuit current to supply (输出对电源的短路电流) | IOS | 27 | 70 | mA | 恒压 / 恒流 (constant voltage / constant current) | 4 | |
| Supply voltage (电源电压) - absolute maximum | VCC | 36 | V | 4 | |||
| Input voltage (输入电压) | VIN | -0.3 | V | Printed upper limit is VCC (-0.3 ~ VCC) | 4 | ||
| Operating ambient temperature range (工作环境温度范围) - absolute maximum | TA | -40 | 85 | ℃ | 4 | ||
| Junction temperature range (结温范围) | TJ | -40 | 150 | ℃ | 4 | ||
| Storage temperature range (存储温度范围) | TSTG | -55 | 150 | ℃ | 4 | ||
| Soldering temperature (焊锡温度) | TLEAD | 260 | ℃ | within 5 s | 4 | ||
| Package power dissipation (封装功耗) | Pd | 0.63 | W | 4 | |||
| Package thermal resistance, junction to ambient (封装热阻 结到环境) | θJa | 200 | ℃/W | 4 | |||
| Supply voltage (电源电压) - recommended operating | VCC | 3 | 36 | V | 4 | ||
| Operating ambient temperature range (工作环境温度范围) - recommended operating | TA | 0 | 85 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
ME4315AM6G-1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
me4315am6g-1-etched.step/me4315am6g-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me4315am6g-1.step/me4315am6g-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (7 pp, sha256
ca7697d4e50ce8fd, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME4315AM6G-1
**MICRONE** · Voltage Reference · SOT-23-6
ME4315AM6G-1 from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCTRL | input | Voltage control loop input. Connects to the resistor divider (R1/R2) that senses the output voltage; the internal voltage-loop op-amp compares this against the 1.21V reference to regulate Vout. |
| 2 | GND | power_in | Ground / device return. All internal references and op-amps are referred to this node. |
| 3 | VOUT | output | Controller error-amp output; open-drain / sink-only (VOL ≈ 400mV at 10mA sink). Typically drives the cathode of an optocoupler LED (with pull-up Rcut) to feed back to the primary-side PWM controller. Short-circuit current to VCC is ~27mA (typ), 70mA (max). |
| 4 | ICTRL | input | Current control loop input; inverting node of the current-loop op-amp used to program/compensate the CC threshold. Sources ~21µA from its own pin when driven to -70mV (IIBI). |
| 5 | VSENSE | input | Current-sense input for the CC loop. Compared against the internal 70mV (typ, 68.5-75.5mV) current-limit reference to set the output current limit: I_LIMIT = (V_SENSE · V_REF) / ((V_SENSE + V_REF) · Rss). |
| 6 | VCC | power_in | Supply input, 3V to 36V operating range (36V absolute max). Typical quiescent current 0.85mA. Bypass locally with a ceramic capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `ME4315AM6G-1`
## Related parts (NOT interchangeable)
The extractor listed these alongside ME4315AM6G-1, but they are **different parts** with different electrical characteristics. Do not order them as substitutes.
- `ME4315AM6G-2`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent operating current (静态工作电流) | Icc | 0.7 | 0.85 | 1 | mA | | 4 |
| Voltage control loop transconductance gain (电压控制环路传导增益) | Gmv | 1 | 3.5 | | mA/mV | | 4 |
| Voltage control loop reference voltage, ME4315-1 variant (电压控制环路参考电压) | Vref | 1.198 | | 1.21 | V | ME4315-1 | 4 |
| Current control loop transconductance gain (电流控制环路传导增益) | Gmi | 1.5 | 7 | | mA/mV | | 4 |
| Current control loop reference voltage (电流控制环路参考电压) | VSENSE | 68.5 | 72 | 75.5 | mV | Iout=2.5mA | 4 |
| Output short-circuit current to supply (输出对电源的短路电流) | IOS | | 27 | 70 | mA | 恒压 / 恒流 (constant voltage / constant current) | 4 |
| Supply voltage (电源电压) - absolute maximum | VCC | | | 36 | V | | 4 |
| Input voltage (输入电压) | VIN | -0.3 | | | V | Printed upper limit is VCC (-0.3 ~ VCC) | 4 |
| Operating ambient temperature range (工作环境温度范围) - absolute maximum | TA | -40 | | 85 | ℃ | | 4 |
| Junction temperature range (结温范围) | TJ | -40 | | 150 | ℃ | | 4 |
| Storage temperature range (存储温度范围) | TSTG | -55 | | 150 | ℃ | | 4 |
| Soldering temperature (焊锡温度) | TLEAD | | | 260 | ℃ | within 5 s | 4 |
| Package power dissipation (封装功耗) | Pd | | | 0.63 | W | | 4 |
| Package thermal resistance, junction to ambient (封装热阻 结到环境) | θJa | | | 200 | ℃/W | | 4 |
| Supply voltage (电源电压) - recommended operating | VCC | 3 | | 36 | V | | 4 |
| Operating ambient temperature range (工作环境温度范围) - recommended operating | TA | 0 | | 85 | ℃ | | 4 |
## CAD (KiCad official)
- Symbol: `ME4315AM6G-1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `me4315am6g-1-etched.step` / `me4315am6g-1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me4315am6g-1.step` / `me4315am6g-1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me4315am6g-1-datasheet.pdf) (7 pp, sha256 `ca7697d4e50ce8fd`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me4315am6g-1-datasheet.pdf)