component
ME4312CSG
Public Made by Adomby adom
MICRONE Battery Management ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownME4312CSG
MICRONE · Battery Management ICs · SOP-8
ME4312CSG from MICRONE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RED | output | Charging indicator red LED pin, which is lit while charging current is normal and off once current drops to the transition point. |
| 2 | VOUT | output | Output pin that can only sink current, with VOL of 400 mV typical at a 10 mA pull-down current. |
| 3 | GND | power_in | Ground reference pin. |
| 4 | VCTRL | input | Voltage control loop input, where the ME4312C reference is 1.210 V (range 1.204 V to 1.216 V) and input bias current is 50 nA typical at Vctrl=1.5 V. |
| 5 | VCC | power_in | Supply pin, with recommended supply range 2.5 V to 36 V and an absolute maximum of 36 V. |
| 6 | VSENSE | input | Current control loop input, where the ME4312C reference is 212 mV (range 206 mV to 218 mV). |
| 7 | ICTRL | input | Current control and transition-point adjustment input, where external resistors set the lower voltage reference and the pin draws 18 µA typical with ICTRL at -70 mV. |
| 8 | GREEN | output | Charging indicator green LED pin, which is lit when charging current falls to the transition point set by the Ictrl network. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOP-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 静态工作电流 (quiescent operating current) | Icc | 1.2 | 1.5 | 1.8 | mA | 无特殊说明（Ta=25℃ VCC=24V） | 6 |
| 电压控制环路传导增益 (voltage loop transconductance) | Gmv | 1 | 3.5 | mA/mV | 6 | ||
| 电压控制环路参考电压 ME4312C (voltage loop reference) | Vref | 1.204 | 1.21 | 1.216 | V | ME4312C | 6 |
| 电流控制环路传导增益 (current loop transconductance) | Gmi | 1.5 | 7 | mA/mV | 6 | ||
| 电流控制环路参考电压 ME4312C (current loop reference) | VSENSE | 206 | 212 | 218 | mV | Iout=2.5mA | 6 |
| 输出对电源的短路电流 (output short-circuit current, constant voltage and constant current) | IOS | 27 | 70 | mA | 恒压 恒流 | 6 | |
| 电源电压 (supply voltage) | VCC | 2.5 | 36 | V | 5 | ||
| 工作温度范围 (operating temperature) | Ta | 0 | 85 | ℃ | 5 | ||
| 电源电压 (supply voltage absolute maximum) | VCC | 36 | V | 5 | |||
| 输入电压 (input voltage) | VIN | -0.3 | V | upper limit is VCC | 5 | ||
| 工作环境温度范围 (ambient operating temperature) | TA | -40 | 85 | ℃ | 5 | ||
| 结温范围 (junction temperature) | TJ | -40 | 150 | ℃ | 5 | ||
| 存储温度范围 (storage temperature) | TSTG | -55 | 150 | ℃ | 5 | ||
| 焊锡温度 (soldering temperature, 5 s) | TLEAD | 260 | ℃ | 5 秒内 | 5 | ||
| 功耗 (power dissipation) | PD | 0.92 | W | 5 | |||
| 封装热阻 结到空气 (junction-to-ambient thermal resistance) | θJA | 136 | ℃/W | 5 |
CAD (KiCad official)
- Symbol:
ME4312CSG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
me4312csg-etched.step/me4312csg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me4312csg.step/me4312csg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (9 pp, sha256
8c47b3c65f176589, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).