ME4074CM5G

{
  "slug": "me4074cm5g",
  "version": "0.1.0",
  "type": "component",
  "description": "MICRONE Battery Management, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "me4074cm5g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "me4074cm5g.kicad_sym",
    "me4074cm5g.kicad_mod",
    "me4074cm5g.glb",
    "me4074cm5g.step",
    "me4074cm5g.lbr",
    "docs/hero.png",
    "docs/me4074cm5g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "me4074cm5g-hero.glb",
    "me4074cm5g-hero.overlay.json",
    "me4074cm5g-etched.glb"
  ],
  "component": {
    "mpn": "ME4074CM5G",
    "manufacturer": "MICRONE",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588954863959224320",
    "parts": {
      "symbol": "me4074cm5g.kicad_sym",
      "footprint": "me4074cm5g.kicad_mod",
      "model_3d": "me4074cm5g-hero.glb",
      "model_3d_plain": "me4074cm5g-etched.glb",
      "model_3d_step": "me4074cm5g-etched.step",
      "model_3d_step_plain": "me4074cm5g.step",
      "lbr": "me4074cm5g.lbr"
    },
    "distributor_links": {
      "lcsc": "C2931248"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T23:57:10Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output that pulls strongly low while charging and is high-impedance when charge is complete or the charger is off; when used for an LED it must be in series with a 1 kΩ to 10 kΩ current-limiting resistor, and it can be tied to GND if the indication is not needed."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the charger."
      },
      {
        "number": "3",
        "name": "BAT",
        "type": "power_out",
        "description": "Charge current output to the battery; in constant-current mode IBAT = 1000/RPROG, with a BAT pin absolute maximum of -0.3 V to 6.5 V and a BAT pin current rating of 800 mA."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Power input pin for the charger, specified at 4.0 V to 6.5 V with 5 V typical, and absolute maximum of -0.3 V to 6.5 V."
      },
      {
        "number": "5",
        "name": "PROG",
        "type": "passive",
        "description": "Charge current programming pin where a resistor to GND sets the charge current, with VPROG = 1 V in constant-current mode, and the absolute maximum range is -0.3 V to Vcc+0.3 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOT23-5 pin map is a diagram in the source and the text layer only gives the pin-number table. P"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0634,
        "at": "2026-10-18T23:54:58"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588954863959224320",
        "pages": 14,
        "sha256": "3fae5e3604690f05",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "me4074cm5g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "me4074cm5g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "26cdb944b4ab9562b06ba16a2de33a337fbc33da416595e19336f9568ef7fd5e",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}