main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 16d ago
viewers me4064am5g: viewers · Ray 16d ago
me4064am5g-etched.glb Publish 0.1.0 · Ray 16d ago
me4064am5g-etched.step me4064am5g: factory component page (tier=lcsc) · Ray 16d ago
me4064am5g-hero.glb me4064am5g: hero GLB from the etched model (keeps the MPN mark) · Ray 16d ago
me4064am5g-hero.overlay.json Publish 0.1.0 · Ray 16d ago
me4064am5g.glb Publish 0.1.0 · Ray 16d ago
me4064am5g.kicad_mod Publish 0.1.0 · Ray 16d ago
me4064am5g.kicad_sym Publish 0.1.0 · Ray 16d ago
me4064am5g.lbr Publish 0.1.0 · Ray 16d ago
me4064am5g.step Publish 0.1.0 · Ray 16d ago
package.json Publish 0.1.0 · Ray 16d ago
page.json Set visibility: public · Ray 16d ago
README.md Publish 0.1.0 · Ray 16d ago

ME4064AM5G

MICRONE · Battery Management ICs · SOT-23-5

ME4064AM5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHRG output Open-drain charge status output that is pulled low by an internal switch while the battery is charging and is high impedance otherwise.
2 GND power_in Ground.
3 BAT power_out Battery connection pin for the positive battery terminal that supplies charge current and regulates 4.2V, with BAT current below 2μA in disable or sleep mode.
4 VCC power_in Positive input supply voltage (4.0V to 8.0V) that powers the internal circuit; when VCC falls within 80mV of the BAT voltage the part enters low-power sleep mode with IBAT below 2μA.
5 PROG passive Charge current setting and monitor pin where a resistor RPROG to GND programs the current, with the pin regulated to 0.1V in precharge and 1V in constant-current mode (IBAT = VPROG/RPROG × 1100).

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VCC 4 5 8 V 6
Static current, charge mode ICC-IBAT 150 500 μA Charge mode, RPROG=1.1KΩ 6
Static current, standby mode ICC-IBAT 55 100 μA Standby mode (charge end) 6
Static current, shutdown mode ICC-IBAT 55 100 μA Shutdown mode (RPROG not connected, VCC<VBAT, or VCC<VUV) 6
Regulated output voltage VFLOAT 4.158 4.2 4.242 V 0℃≤TA≤85℃ 6
BAT pin current, current mode IBAT 450 500 550 mA RPROG=2.2KΩ, current mode, VBAT=3.9V 6
BAT pin current, current mode IBAT 950 1000 1050 mA RPROG=1.1KΩ, current mode, VBAT=3.9V 6
BAT pin current, standby mode IBAT -6 -2.5 0 μA Standby mode: VBAT=4.2V 6
BAT pin current, shutdown mode IBAT -2 2 μA Shutdown mode, RPROG not connected (typ ±1) 6
BAT pin current, sleep mode IBAT -2 -1 μA Sleep mode, VCC=0V 6
Trickle charge current ITRIKL 120 130 140 mA VBAT<VTRIKL, RPROG=1.1KΩ 6
Trickle charge threshold voltage VTRIKL 2.8 2.9 3 V RPROG=1.1KΩ, VBAT rising 6
Trickle voltage hysteresis VTRHYS 150 200 250 mV RPROG=1.1KΩ 6
VCC under voltage lockout threshold VUV 3.5 3.7 3.9 V VCC from low to high 6
VCC under voltage lockout hysteresis VUVHYS 150 200 300 mV 6
VCC-VBAT lockout threshold voltage VASD 100 140 180 mV VCC from low to high 6
VCC-VBAT lockout threshold voltage VASD 50 80 110 mV VCC from high to low 6
Termination current threshold ITERM 60 70 80 mA RPROG=2.2KΩ 6
Termination current threshold ITERM 120 130 140 mA RPROG=1.1KΩ 6
PROG pin voltage VPROG 0.9 1 1.1 V RPROG=1.1KΩ, current mode 6
CHRG pin output low voltage VCHRG 0.3 0.6 V =5mA 6
Recharge battery threshold voltage ΔVRECHRG 120 180 240 mV VFLOAT-VRECHRG 6
Recharge comparator filter time tRECHARGE 0.8 1.8 4 mS VBAT from high to low 6
Termination comparator filter time tTERM 0.8 1.8 4 mS IBAT below ICHG/10 6
Thermal protection temperature TLIM 110 ℃ 6
Power FET ON resistance RON 650 mΩ between VCC and BAT 6
Soft-start time tSS 20 μS IBAT=0 to IBAT=1100V/RPROG 6
PROG pin pull-up current IPROG 2 μA 6
Input supply voltage VCC -0.3 8 V 5
PROG pin voltage -0.3 V upper limit VCC+0.3 5
BAT pin voltage -0.3 7 V 5
CHRG pin voltage -0.3 10 V 5
BAT pin current 800 mA 5
PROG pin current 1200 μA 5
Maximum junction temperature 145 ℃ 5
Operating ambient temperature Topa -40 85 ℃ 5
Storage temperature Tstr -65 125 ℃ 5
Soldering temperature 260 ℃ Recommended 10S 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ppa the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written 16
contacts copper copper lead frame, through the package leads, (especially the ground lead) to the PC board copper. The PC board 11

CAD (KiCad official)

  • Symbol: ME4064AM5G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: me4064am5g-etched.step / me4064am5g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me4064am5g.step / me4064am5g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (16 pp, sha256 2ffde19a7828fa2e, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF