ME4057ASPG

{
 "schema": "adom.pads/1",
 "slug": "me4057aspg",
 "footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm",
 "generated_from": {
  "footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm@sha256:a7971720bdda0353",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -1.905
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm@sha256:a7971720bdda0353"
 },
 "pad_count": 9,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "TEMP",
   "type": "input",
   "description": "Battery temperature sense input. Connect to the wiper of a divider formed with the pack NTC thermistor. Charging is suspended when V_TEMP falls below ~45% V_CC or rises above ~80% V_CC. Tie to GND to disable the temperature-sense function.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "PROG",
   "type": "bidirectional",
   "description": "Charge-current program and monitor pin. A resistor R_PROG from PROG to GND sets the fast-charge current per I_BAT = (V_PROG/R_PROG)*1100 (V_PROG ≈ 1 V in constant-current mode, 0.1 V in precharge). The pin voltage may also be measured to monitor instantaneous charge current.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground return. Connect to the system ground plane; the ESOP exposed pad should also be soldered to this ground for thermal dissipation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive input supply (4.7 V - 6.5 V typical, 5 V nominal) from a USB port or wall adapter. When VCC drops within ~80 mV of V_BAT the device enters low-power sleep, dropping I_BAT to <2 µA. Bypass locally with a ceramic capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "BAT",
   "type": "power_out",
   "description": "Battery connection pin. Sources the regulated charge current from the internal PMOS power FET (R_ON ≈ 650 mΩ) up to 1 A, and regulates to 4.2 V float voltage on the 'A' variant. Drain from the battery is <2 µA in disable/sleep modes.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "STDBY",
   "type": "output",
   "description": "Open-drain charge-terminated status output (active-low, overlined /STDBY). Pulled low when charging has terminated (battery full); otherwise high impedance. Typically drives a green LED to VCC through a current-limit resistor.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "CHRG",
   "type": "output",
   "description": "Open-drain charge-in-progress status output (active-low, overlined /CHRG). Pulled low while the battery is charging; goes to high impedance when charging terminates or the battery is out of temperature range. Typically drives a red LED to VCC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "CE",
   "type": "input",
   "description": "Chip-enable input, TTL/CMOS compatible. Drive high (or leave floating pulled up) to place the device in normal operating mode; drive low to force the ME4057 into disable (shutdown) mode.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.29,
    3.0
   ],
   "layers": [],
   "thermal": true,
   "pin": "9",
   "name": "EXPOSED PAD",
   "type": "power_in",
   "description": "Exposed thermal pad. Present in the package land pattern; connect it per the manufacturer datasheet thermal recommendation. Added because the footprint carries this pad and the symbol had no pin for it.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}