component

ME4057ASPG-N

Public Made by Adom

by adom

MICRONE Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmicme4057aspg-n
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me4057aspg-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
viewers me4057aspg-n: viewers · Ray 1mo ago
me4057aspg-n-etched.fit.json me4057aspg-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
me4057aspg-n-etched.glb me4057aspg-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
me4057aspg-n-etched.step me4057aspg-n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
me4057aspg-n.glb Publish 0.1.0 · Ray 1mo ago
me4057aspg-n.kicad_mod Publish 0.1.0 · Ray 1mo ago
me4057aspg-n.kicad_sym Publish 0.1.0 · Ray 1mo ago
me4057aspg-n.lbr Publish 0.1.0 · Ray 1mo ago
me4057aspg-n.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.1.0 · Ray 1mo ago
page.json me4057aspg-n: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 22h ago
README.md me4057aspg-n: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 16d ago

ME4057ASPG-N

MICRONE · Battery Management · ESOP-8

ME4057ASPG-N from MICRONE, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TEMP input Battery temperature sense input. Connect to an external NTC thermistor divider to monitor battery temperature; charging is suspended when V(TEMP) is below 45%*VCC or above 80%*VCC (over/under temperature). Tie directly to GND if temperature monitoring is not used.
2 PROG passive Constant-current program and charge-current monitor pin. An external resistor R_PROG from PROG to GND sets the fast-charge current per I_BAT = (V_PROG / R_PROG) * 1100, with V_PROG ≈ 1.0V. Typical values: R_PROG = 1.1kΩ → 1000mA, 2.2kΩ → 500mA.
3 GND power_in Device ground reference. The exposed thermal PAD on the ESOP-8 package should also be soldered to the GND plane to improve thermal dissipation for the internal pass MOSFET.
4 VCC power_in Chip input supply pin, typically from a USB port or AC adapter. Operating range 4.0V to 9.0V (absolute max 10V); when VCC drops to within ~80mV of V(BAT) the chip shuts down and enters sleep mode (leakage < 2µA).
5 BAT power_out Battery connection / charge current output. Regulated float voltage is 4.2V (ME4057ASPG-N) with ±1% accuracy; supplies up to 1A programmed charge current to a single Li-ion/Li-polymer cell.
6 STDBY output Open-drain charge-complete (standby) status indicator, active low. Internal N-channel pulls STDBY low when charging has terminated (charge current below C/10); high-impedance otherwise.
7 CHRG output Open-drain charge status indicator, active low. Internal N-channel pulls CHRG low while a charge cycle is in progress; high-impedance in all other states.
8 CE input Chip enable input. Drive high to enable normal charger operation, drive low to shut the chip down. Compatible with TTL or CMOS logic levels; absolute max 10V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package ESOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ME4057ASPG-N
  • ME4057ASPG-NDSPG-N

CAD (KiCad official)

  • Symbol: ME4057ASPG-N
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: me4057aspg-n-etched.step / me4057aspg-n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me4057aspg-n.step / me4057aspg-n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (17 pp, sha256 3b33536d2bdfda15, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF