main
Ray
me4056aspg-n: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
4d8d858
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198
{
"schema_version": 1,
"type": "component",
"slug": "me4056aspg-n",
"title": "ME4056ASPG-N",
"brief": "MICRONE Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"me4056aspg-n"
],
"component": {
"mpn": "ME4056ASPG-N",
"manufacturer": "MICRONE",
"package": "ESOP-8",
"pin_count": 8,
"category": "PMIC",
"subcategory": "Battery Management",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121330_MICRONE-Nanjing-Micro-One-Elec-ME4056ASPG-N_C2925765.pdf",
"parts": {
"symbol": "me4056aspg-n.kicad_sym",
"footprint": "me4056aspg-n.kicad_mod",
"model_3d": "me4056aspg-n-etched.glb",
"model_3d_plain": "me4056aspg-n.glb",
"model_3d_step": "me4056aspg-n-etched.step",
"model_3d_step_plain": "me4056aspg-n.step",
"lbr": "me4056aspg-n.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "TEMP",
"type": "input",
"description": "Battery temperature sense input. Connect to the wiper of an NTC divider referenced to VCC; charging stops if V(TEMP) drops below ~45% VCC or rises above ~80% VCC (over/under-temperature). Tie directly to GND to disable temperature monitoring."
},
{
"number": "2",
"name": "PROG",
"type": "passive",
"description": "Charge-current program pin. A resistor R_PROG from this pin to GND sets the constant-current level per I_BAT = 1300 * V_PROG / R_PROG (V_PROG ≈ 1.0 V). Also used internally for charge-current monitoring and C/10 termination detection."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Device ground / power return. The ESOP-8 exposed thermal pad should also connect to this net for heat dissipation."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Charger supply input (4.0-7.0 V, 5 V typical; keep ≤ 5.5 V for full 0.9 A charging). When VCC falls to within ~80 mV of BAT the internal pass FET shuts off and the device enters sleep mode with < 2 µA battery leakage."
},
{
"number": "5",
"name": "BAT",
"type": "power_out",
"description": "Battery connection. Sources the charging current and regulates to V_FLOAT = 4.2 V (A suffix) or 4.34 V (D suffix) during constant-voltage phase. Bypass with a low-ESR capacitor to GND."
},
{
"number": "6",
"name": "/STDBY",
"type": "output",
"description": "Charge-complete status indicator, open-drain, active-low. Internal N-MOS pulls low when charge termination is detected; high-impedance in all other states. Typically pulled up through an LED to VCC."
},
{
"number": "7",
"name": "/CHRG",
"type": "output",
"description": "Charging status indicator, open-drain, active-low. Internal N-MOS pulls low while the battery is being charged; high-impedance otherwise. Typically pulled up through an LED to VCC."
},
{
"number": "8",
"name": "CE",
"type": "input",
"description": "Chip-enable input, active-high, Schmitt-trigger. Drive high to enable normal charging; drive low to disable and place the device in low-current standby. Compatible with TTL/CMOS logic levels."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121330_MICRONE-Nanjing-Micro-One-Elec-ME4056ASPG-N_C2925765.pdf",
"pages": 17,
"sha256": "7fdf54d13dc3989b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "me4056aspg-n.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "me4056aspg-n-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "512703f681c474d9810615c0e934a091bbde19f0338a7c46b4f408fe59d377bd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "MICRONE",
"Package": "ESOP-8",
"Category": "PMIC",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"me4056aspg-n"
],
"discovery_pitch": "ME4056ASPG-N (MICRONE) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"me4056aspg-n.kicad_sym",
"me4056aspg-n.kicad_mod",
"me4056aspg-n.glb",
"me4056aspg-n.step",
"me4056aspg-n.lbr",
"docs/hero.png",
"docs/me4056aspg-n-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"me4056aspg-n-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "ME4056ASPG-N",
"kind": "packaging"
},
{
"mpn": "ME4056ASPG-NDSPG-N",
"kind": "packaging"
}
],
"updated_at": "2026-09-25T01:39:29.345Z"
}