main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me4052aspg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me4052aspg: viewers · Ray
me4052aspg-etched.fit.json me4052aspg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me4052aspg-etched.glb me4052aspg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me4052aspg-etched.step me4052aspg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me4052aspg.glb Publish 0.1.0 · Ray
me4052aspg.kicad_mod Publish 0.1.0 · Ray
me4052aspg.kicad_sym Publish 0.1.0 · Ray
me4052aspg.lbr Publish 0.1.0 · Ray
me4052aspg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json me4052aspg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md me4052aspg: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ME4052ASPG

MICRONE · Battery Management · ESOP-8

ME4052ASPG from MICRONE, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Charge-current programming / current-sense input. An external resistor (R_CS) between VIN and CS sets the constant-charge current (V_SNSC ≈ 195 mV typ across R_CS in CC mode; V_SNST ≈ 19 mV typ in trickle mode; V_TEMI ≈ 30 mV typ triggers termination).
2 CHRG output Open-drain charge status indicator. Sinks current to light an LED to VCC while charging; goes high-Z (LED off) when charging completes. V_OL ≈ 0.3 V at I_CHRG = 5 mA.
3 STDBY output Open-drain standby / charge-complete status indicator. Drives an external LED to VCC to indicate charging is finished (standby). V_OL ≈ 0.3 V at I_STDBY = 5 mA.
4 BAT power_out Battery output / voltage sense pin. Delivers charge current to the 2-cell Li-ion pack and senses pack voltage for the 8.4 V float regulation loop. Rated for 1000 mA and up to 18 V absolute max.
5 GND power_in Ground reference for the IC.
6 VIN power_in Chip supply input from adapter/USB. Operating range 8.9-15 V (typical 9 V), 18 V absolute max. UVLO ≈ 3.6 V, OVP ≈ 15 V.
7 TEMP input Battery temperature sense input. Connects to an NTC thermistor to monitor pack temperature; charging is suspended when V_TEMP is outside 45%-80% of V_IN (V_TEMP-L ≈ 45 %V_IN rising release, V_TEMP-H ≈ 80 %V_IN). Tie directly to GND if the temperature-monitor feature is unused.
8 EN input Chip enable. Tie high (V_ENON ≥ 2 V) to enable the charger; tie low (V_ENOFF ≤ 0.4 V, to GND) to shut down the chip (I_IN ≈ 20 µA in shutdown).
9 BAT_PAD power_out Exposed thermal pad on the underside of the ESOP-8. Must be connected to BAT (pin 4) per the datasheet - it is electrically the BAT node and also serves as the primary thermal dissipation path (θ_JA = 63 °C/W).

Key specifications

Parameter Value
Manufacturer MICRONE
Package ESOP-8
Category PMIC
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • ME4052ASPG

CAD (KiCad official)

  • Symbol: ME4052ASPG
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: me4052aspg-etched.step / me4052aspg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me4052aspg.step / me4052aspg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (12 pp, sha256 e4bf78f9eafc09b0, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF