← Commit history

Set visibility: public

Ray ·5618292da3 · ·parent 4d0f105
1 file changed +11−8
page.json+11−8
@@ -32,19 +32,19 @@         "number": "1",         "name": "CS",         "type": "input",-        "description": "Charge-current programming / current-sense input. An external resistor (R_CS) between VIN and CS sets the constant-charge current (V_SNSC \u2248 195 mV typ across R_CS in CC mode; V_SNST \u2248 19 mV typ in trickle mode; V_TEMI \u2248 30 mV typ triggers termination)."+        "description": "Charge-current programming / current-sense input. An external resistor (R_CS) between VIN and CS sets the constant-charge current (V_SNSC ≈ 195 mV typ across R_CS in CC mode; V_SNST ≈ 19 mV typ in trickle mode; V_TEMI ≈ 30 mV typ triggers termination)."       },       {         "number": "2",         "name": "CHRG",         "type": "output",-        "description": "Open-drain charge status indicator. Sinks current to light an LED to VCC while charging; goes high-Z (LED off) when charging completes. V_OL \u2248 0.3 V at I_CHRG = 5 mA."+        "description": "Open-drain charge status indicator. Sinks current to light an LED to VCC while charging; goes high-Z (LED off) when charging completes. V_OL ≈ 0.3 V at I_CHRG = 5 mA."       },       {         "number": "3",         "name": "STDBY",         "type": "output",-        "description": "Open-drain standby / charge-complete status indicator. Drives an external LED to VCC to indicate charging is finished (standby). V_OL \u2248 0.3 V at I_STDBY = 5 mA."+        "description": "Open-drain standby / charge-complete status indicator. Drives an external LED to VCC to indicate charging is finished (standby). V_OL ≈ 0.3 V at I_STDBY = 5 mA."       },       {         "number": "4",@@ -62,25 +62,25 @@         "number": "6",         "name": "VIN",         "type": "power_in",-        "description": "Chip supply input from adapter/USB. Operating range 8.9-15 V (typical 9 V), 18 V absolute max. UVLO \u2248 3.6 V, OVP \u2248 15 V."+        "description": "Chip supply input from adapter/USB. Operating range 8.9-15 V (typical 9 V), 18 V absolute max. UVLO ≈ 3.6 V, OVP ≈ 15 V."       },       {         "number": "7",         "name": "TEMP",         "type": "input",-        "description": "Battery temperature sense input. Connects to an NTC thermistor to monitor pack temperature; charging is suspended when V_TEMP is outside 45%-80% of V_IN (V_TEMP-L \u2248 45 %V_IN rising release, V_TEMP-H \u2248 80 %V_IN). Tie directly to GND if the temperature-monitor feature is unused."+        "description": "Battery temperature sense input. Connects to an NTC thermistor to monitor pack temperature; charging is suspended when V_TEMP is outside 45%-80% of V_IN (V_TEMP-L ≈ 45 %V_IN rising release, V_TEMP-H ≈ 80 %V_IN). Tie directly to GND if the temperature-monitor feature is unused."       },       {         "number": "8",         "name": "EN",         "type": "input",-        "description": "Chip enable. Tie high (V_ENON \u2265 2 V) to enable the charger; tie low (V_ENOFF \u2264 0.4 V, to GND) to shut down the chip (I_IN \u2248 20 \u00b5A in shutdown)."+        "description": "Chip enable. Tie high (V_ENON ≥ 2 V) to enable the charger; tie low (V_ENOFF ≤ 0.4 V, to GND) to shut down the chip (I_IN ≈ 20 µA in shutdown)."       },       {         "number": "9",         "name": "BAT_PAD",         "type": "power_out",-        "description": "Exposed thermal pad on the underside of the ESOP-8. Must be connected to BAT (pin 4) per the datasheet - it is electrically the BAT node and also serves as the primary thermal dissipation path (\u03b8_JA = 63 \u00b0C/W)."+        "description": "Exposed thermal pad on the underside of the ESOP-8. Must be connected to BAT (pin 4) per the datasheet - it is electrically the BAT node and also serves as the primary thermal dissipation path (θ_JA = 63 °C/W)."       }     ],     "provenance": {@@ -144,5 +144,8 @@     "docs/me4052aspg-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file