main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me3121am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me3121am6g: viewers · Ray
me3121am6g-etched.fit.json me3121am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me3121am6g-etched.glb me3121am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me3121am6g-etched.step me3121am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me3121am6g.glb Publish 0.1.0 · Ray
me3121am6g.kicad_mod Publish 0.1.0 · Ray
me3121am6g.kicad_sym Publish 0.1.0 · Ray
me3121am6g.lbr Publish 0.1.0 · Ray
me3121am6g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json me3121am6g: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray
README.md me3121am6g: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray

ME3121AM6G

MICRONE · DC-DC Converters · SOT-23-6

ME3121AM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT passive Bootstrap capacitor pin for the high-side NMOSFET gate driver supply. Connect a ceramic capacitor of at least 0.1 µF between BOOT and LX. VBOOT_SW absolute max is -0.3 V to +6 V.
2 GND power_in Ground pin. Return for input, output, and internal control circuitry.
3 FB input Feedback voltage input to the inverting input of the internal error amplifier. Regulated to the 0.6 V ± 2 % internal reference; output voltage is set by an external R1/R2 divider with R1 = R2 × (VOUT/0.6 V − 1). Absolute max -0.3 V to +40 V.
4 EN input Enable input. Logic high enables the chip (rising threshold typ 1.3 V, max 1.5 V; falling threshold min 0.8 V, typ 1.0 V). Absolute max -0.3 V to +40 V, so EN can be tied directly to VIN through a pull-up.
5 VIN power_in Power input for the controller and power switches. Operating range 4.7 V to 40 V (typ 12 V); absolute max 40 V. Bypass with a 47 µF/40 V ceramic capacitor placed close to the pin.
6 LX power_out Switching node between the internal high-side and low-side NMOSFETs. Connect to the external inductor (typ 3.3 µH) and to the bootstrap capacitor return. Absolute max -0.3 V to +40 V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • ME3121AM6G

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 4.7 40 V 4
Input voltage VIN 4.7 12 40 V 4
Output voltage VOUT 0.6 3.3 12 V 4
Inductance L 1.2 3.3 6 uH 4
Output capacitance COUT 10 20 uF 4
Operating ambient temperature TA -40 85 °C 4
Shutdown current ISD 8 15 uA VIN = 40 V, IC shut down 4
Quiescent current IQ 120 200 uA VIN = 40 V, IC enabled, VFB = 0.7 V 4
Feedback reference voltage VREF 0.588 0.6 0.612 V 4
High-side switch on-resistance RDSON_H 410 500 mΩ VBOOT - VLX = 4.3 V 4
Low-side switch on-resistance RDSON_L 170 210 mΩ 4
Peak current limit ILIM_PEAK 1.9 2.5 A 4
Valley current limit ILIM_VALLEY 1.4 1.9 A 4
Enable rising threshold VENH 1.3 1.5 V VEN rising 4
Enable falling threshold VENL 0.8 1 V 4
Input UVLO threshold VIN_UVLO 4.55 4.7 V VIN rising 4
Input UVLO hysteresis VIN_HYS 0.2 V 4
Minimum on time Tmin_on 100 150 ns 4
Minimum off time Tmin_off 150 200 ns 4
Switching frequency FSW 1 MHz 4
Soft-start time tss 2.3 ms 4
Over-temperature protection threshold TOTP 160 °C 4
Over-temperature protection hysteresis THYS 40 °C 4
VIN pin voltage VIN -0.3 40 V 3
LX pin voltage VLX -0.3 40 V 3
BOOT to SW pin voltage VBOOT_SW -0.3 6 V 3
EN pin voltage VEN -0.3 40 V 3
FB pin voltage VFB -0.3 40 V 3
Package power dissipation Pd 0.63 W 3
Operating ambient temperature range TA -40 85 ℃ 3
Storage temperature range TSTG -55 150 ℃ 3
Junction temperature range TJ -40 150 ℃ 3
Junction-to-ambient thermal resistance (package) θJA 200 ℃/W 3

CAD (KiCad official)

  • Symbol: ME3121AM6G
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: me3121am6g-etched.step / me3121am6g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me3121am6g.step / me3121am6g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (9 pp, sha256 b49ad10e085789c4, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF